add-component-v1

name

add-component-v1

description

Adds a new I2C sensor component definition to the Wippersnapper_Components repository. Use this skill whenever the user wants to create a matching PR from the firmware repo, add a new sensor component, create a definition.json, add an image for a WipperSnapper I2C component, or even just mentions a sensor name in the context of WipperSnapper or Adafruit IO. Also use when the user says "add component", "matching PR", "new sensor", "component definition", or asks about what subcomponents or I2C addresses a sensor uses. Covers: research, definition.json creation, product image acquisition, CI validation, and PR creation. This skill is for the components repo only — firmware driver changes belong in Adafruit_Wippersnapper_Arduino (see the add-sensor-component-v1 skill there).

Add I2C Sensor Component Definition to Wippersnapper_Components v1

This skill adds a new I2C sensor component to the Wippersnapper_Components repository. Each component lives in components/i2c/<sensor_name>/ and consists of:

1. definition.json — describes the sensor, its I2C addresses, and subcomponents
2. image.jpg (or .png) — product photo, 400x300px, 4:3 ratio, under 100KB

Naming convention

• lowercase for the component folder name and all file names within it
• The folder name must exactly match the strcmp() string used in the firmware's WipperSnapper_I2C.cpp initI2CDevice() method
• Example: components/i2c/tmp119/

Decide the canonical name in Step 0 and use it everywhere.

Reference

The official Adafruit guide for this process:

• Human-readable: https://learn.adafruit.com/how-to-add-a-new-component-to-adafruit-io-wippersnapper?view=all
• Machine-readable: https://learn.adafruit.com/how-to-add-a-new-component-to-adafruit-io-wippersnapper.md?view=all

Fetch the <guide-slug-without-page-path-qualifier>.md?view=all version if you need more detail on any step.

Arguments

Accepts a sensor name as argument (e.g. /add-component-v1 TMP119).

The user may also provide: datasheet URL, product page URL, learn guide URL, vendor name, I2C addresses, and what the sensor measures. If not provided, research them.

The user may also reference a companion firmware PR that contains a suggested definition.json. Treat PR-provided definitions as hints, not as verified data. Always run Step 0 research independently — firmware PR authors often use GitHub library URLs instead of learn guides, miss I2C addresses, or use suboptimal field values. Every field must be verified against authoritative sources (product page, learn guide, datasheet) before use.

Step 0 — Research the Sensor (MANDATORY before creating any files)

Do not skip this step. Even if a firmware PR or the user supplies a complete definition.json, you MUST independently verify every field — especially documentationURL (must be a learn guide for Adafruit products, not a GitHub repo) and i2cAddresses (must include all ADDR pin combinations). Copying unverified values from PRs has caused bad PRs.

Check for duplicates first

Before anything else, check components/i2c/ to see if a component already exists for this sensor. If it does, tell the user — they may want to update it rather than create a new one.

Gather sensor information

What	How to find it
Product page	Web search "adafruit <SENSOR>" to find https://www.adafruit.com/product/<ID>. For non-Adafruit products, find the manufacturer's product page or a distributor listing (DigiKey, Mouser, etc.)
Learn guide	Found on the Adafruit product page HTML (grep for learn.adafruit.com). Fetch the .md?view=all version for easy reading. For non-Adafruit products, use the manufacturer's documentation or datasheet
Vendor	The chip manufacturer (e.g. "Bosch", "Texas Instruments", "Sensirion", "OMRON", "Melexis"), NOT "Adafruit" unless Adafruit designed the chip
I2C addresses	Datasheet, learn guide, or Arduino library. Include ALL possible addresses from ADDR pin configurations. Also check https://learn.adafruit.com/i2c-addresses/the-list
What it measures	Map each reading to a subcomponent type from the reference table below
Documentation URL	Prefer: Adafruit learn guide > manufacturer docs page/wiki > datasheet URL
Closest existing component	Browse components/i2c/ for a sensor in the same family or with identical reading types — use it as a template

Valid subcomponent types

These are the only valid values (must match the pattern in components/i2c/schema.json):

Subcomponent	What it measures	SI unit
ambient-temp	Ambient temperature	degC
ambient-temp-fahrenheit	Ambient temperature	degF
object-temp	Object/thermocouple temp	degC
object-temp-fahrenheit	Object/thermocouple temp	degF
humidity	Relative humidity	%RH
pressure	Barometric pressure	hPa
altitude	Relative altitude	m
co2	CO2 concentration	ppm
eco2	Estimated CO2	ppm
tvoc	Total VOCs	ppb
gas-resistance	Gas resistance	ohm
light	Light level	lux
lux	Light level (lux)	lux
proximity	Proximity	unitless
voltage	Voltage	V
current	Current	A
color	Color	unitless
raw	Raw data	unitless
unitless-percent	Percentage	%
pm10-std	PM1.0 standard	ug/m3
pm25-std	PM2.5 standard	ug/m3
pm100-std	PM10.0 standard	ug/m3
pm10-env

Temperature sensors almost always include BOTH ambient-temp AND ambient-temp-fahrenheit. The firmware base class handles the degC-to-degF conversion automatically — the driver only implements the Celsius version.

Step 1 — Create the component folder and definition.json

Folder naming

• Lowercase only — CI rejects uppercase characters in paths
• Folder name must match the strcmp() string used in the firmware's WipperSnapper_I2C.cpp
• Example: components/i2c/tmp119/

definition.json format

{
  "displayName": "<Sensor Display Name>",
  "vendor": "<Chip Manufacturer>",
  "productURL": "https://www.adafruit.com/product/<ID>",
  "documentationURL": "https://learn.adafruit.com/<guide-slug>",
  "published": false,
  "i2cAddresses": ["0x48"],
  "subcomponents": ["ambient-temp", "ambient-temp-fahrenheit"]
}

Field rules

Field	Required	Notes
displayName	Yes	3-24 characters. Usually the chip name (e.g. "TMP119", "BME280")
vendor	Yes	3-24 characters. The chip manufacturer, not "Adafruit"
i2cAddresses	Yes	Array of hex strings. Include ALL possible addresses
subcomponents	Yes	Array of sensor type strings or objects
productURL	No	URI to product page (see URL guidance below)
documentationURL	No	URI to documentation (see URL guidance below)
published	No	Always set to false for new contributions. Adafruit sets true after release
description	No	3-255 characters. Brief description of capabilities

URL guidance

productURL — where someone can buy or learn about the product:

• Adafruit products: https://www.adafruit.com/product/<ID> (preferred)
• Non-Adafruit products: Use distributor listings (DigiKey, Mouser) or manufacturer product pages. Examples from existing components:
  • DigiKey: https://www.digikey.com/en/products/detail/... (used by SEN5x, SHT20, MLX90632)
  • Manufacturer: http://www.aosong.com/en/products-60.html (used by AHT21)

documentationURL — technical docs for the sensor:

• Adafruit products: Adafruit learn guide (preferred). Find it on the product page (search for learn.adafruit.com). Never use a GitHub library repo URL (e.g. github.com/adafruit/Adafruit_<SENSOR>) — that is source code, not documentation.
• Non-Adafruit products: Manufacturer documentation page, wiki, or datasheet PDF URL. Examples: Sensirion datasheet PDFs, OMRON user manuals
• Third-party domain URLs may initially fail CI URL validation until a maintainer adds the domain to the allowlist — note this in the PR if using a non-standard domain

Subcomponent formats

Simple format — when the sensor type name is self-explanatory:

"subcomponents": ["ambient-temp", "ambient-temp-fahrenheit", "pressure"]

Object format — when a custom display name is needed for clarity:

"subcomponents": [
  { "displayName": "Ambient Light", "sensorType": "light" },
  { "displayName": "UV Count", "sensorType": "raw" }
]

Use objects when:

1. Type name is ambiguous — "light" could mean visible, UV, or IR. displayName clarifies in the UI
2. Two readings share the same physical type — v1 schema forbids duplicate sensorType. Use "raw" for the second with a descriptive displayName (e.g. LTR-329: "light" for ambient, "raw" with displayName: "Infrared" for IR)
3. Non-standard units — sensor reports in a unit that doesn't match the Adafruit_Sensor SI unit for that type; use raw or unitless-percent with a descriptive displayName
4. Clarity — when the auto-generated UI label would be confusing. Compare existing components that use the same types for reference

When using "raw" as a stand-in, the driver must implement getEventRaw() for that reading.

Examples from existing components:

• TMP117 (temp only): ["ambient-temp", "ambient-temp-fahrenheit"]
• BME280 (multi): ["ambient-temp", "ambient-temp-fahrenheit", "humidity", "pressure", "altitude"]
• SGP41 (VOC + NOx + raw): ["voc-index", "nox-index", {"displayName": "Raw VOC Ticks (Reference)", "sensorType": "raw"}]
• D6T-1A (ambient + object temp, all objects for clarity):

  [
    {"displayName": "Ambient Temperature (°C)", "sensorType": "ambient-temp"},
    {"displayName": "Ambient Temperature (°F)", "sensorType": "ambient-temp-fahrenheit"},
    {"displayName": "Measured Object Temp (°C)", "sensorType": "object-temp"},
    {"displayName": "Measured Object Temp (°F)", "sensorType": "object-temp-fahrenheit"}
  ]
  

• SEN55 (many readings, simple strings): ["ambient-temp", "ambient-temp-fahrenheit", "humidity", "pm10-std", "pm25-std", "pm100-std", "voc-index", "nox-index"]

Schema validation

The definition.json must validate against components/i2c/schema.json. Key constraints:

• displayName: string, 3-24 chars
• vendor: string, 3-24 chars
• i2cAddresses: array of strings
• subcomponents: array — each item is either a valid sensor type string OR an object with required displayName (string) and sensorType (valid sensor type string), optional defaultPeriod
• No additional properties allowed (additionalProperties: false)

Step 2 — Add product image

Requirements (enforced by CI)

Property	Requirement
Dimensions	Exactly 400x300 pixels
Aspect ratio	Must be exactly 4:3
File size	Under 100KB (102400 bytes)
Format	.jpg, .jpeg, .png, .gif, or .svg
Filename	image.<ext> (lowercase)
Mimetype	Must match file extension

Choosing the right source image

For Adafruit products:

1. Scrape all image URLs from the product page: Fetch https://www.adafruit.com/product/<PID> and extract all cdn-shop.adafruit.com image URLs. The product page gallery contains every available shot — don't guess image numbers, as they are not necessarily contiguous.
2. CRITICAL — Always use the /original/ CDN URL, NOT 970x728 or 640x480. The Adafruit CDN URL contains a resolution prefix. You MUST replace it with original to get the highest-resolution source for downscaling. Downloading a pre-scaled version (e.g. 970x728) produces a blurry 400x300 result.
   • USE THIS: https://cdn-shop.adafruit.com/original/<PID>-NN.jpg
   • NOT: https://cdn-shop.adafruit.com/970x728/<PID>-NN.jpg
   • NOT: https://cdn-shop.adafruit.com/640x480/<PID>-NN.jpg
   • For each image URL scraped from the product page, replace the resolution part (e.g. 970x728, 640x480) with original before downloading
3. Check all available shots from the scraped URLs — pick the slight-angle / isometric close-up of the breakout board with a plain background (this is the standard Adafruit product photo style, typically image 00). Avoid lifestyle shots, shots with other boards or accessories in the frame, or images where the board is very small in the frame.
4. Compare with existing component images (e.g. components/i2c/sgp41/image.jpg) for the expected style: close-up, slight angle, plain dark background, board well-centered.

For non-Adafruit products:

If no Adafruit CDN image is available, try:

1. The manufacturer's product page for an official product photo
2. Distributor listings (DigiKey, Mouser) which often have product images
3. Ask the user to provide an image

Whatever the source, the image must meet the same CI requirements (400x300, 4:3, under 100KB).

Centering and cropping

The board must be visually centered in the final image. This means:

• The top and bottom of the board should be approximately the same distance from the top and bottom edges of the image
• The board should be horizontally centered in the frame
• There should be a comfortable amount of dead space around the board so it doesn't feel cropped or cramped in the UI

The source image from Adafruit CDN often has the board slightly off-center (typically shifted upward). To correct this:

1. View the source image to identify the board's position. Estimate the top margin (from image top to board top) and bottom margin (from board bottom to image bottom).
2. Calculate the vertical shift needed: shift = (bottom_margin - top_margin) / 2
   • Positive shift = crop from top (board was too high)
   • Negative shift = crop from bottom (board was too low)
3. If the board is also off-center horizontally, apply a horizontal offset too.
4. After shifting, restore exact 4:3 ratio by trimming the opposite axis symmetrically.

The shift value depends on the source image resolution. If you determined a shift of N pixels at one resolution, scale proportionally for a different resolution source: scaled_shift = N * source_height / reference_height

from PIL import Image

img = Image.open('source.jpg')
w, h = img.size

# Vertical shift to center the board (adjust based on visual inspection)
# Positive = crop from top, negative = crop from bottom
v_shift = 75  # example for a ~3000px tall source image

# Horizontal shift to center the board (usually 0, adjust if needed)
h_shift = 0   # positive = crop from left, negative = crop from right

# Apply shifts
left = max(0, h_shift)
top = max(0, v_shift)
right = w + min(0, h_shift)
bottom = h + min(0, v_shift)
cropped = img.crop((left, top, right, bottom))

# Restore exact 4:3 ratio by trimming the axis that wasn't shifted
cw, ch = cropped.size
target_w = int(ch * 4 / 3)
target_w = target_w - (target_w % 2)  # ensure even
if target_w > cw:
    # Width is limiting — trim height instead
    target_h = int(cw * 3 / 4)
    target_h = target_h - (target_h % 2)
    y_off = (ch - target_h) // 2
    final = cropped.crop((0, y_off, cw, y_off + target_h))
else:
    x_off = (cw - target_w) // 2
    final = cropped.crop((x_off, 0, x_off + target_w, ch))

After processing, visually inspect the result to confirm the board looks centered. If not, adjust the shift values and try again. The goal is for someone glancing at the image to see the board sitting comfortably in the middle of the frame.

High-quality resize

Start from the original resolution source to minimize artifacts when downscaling. A larger source means more pixels to sample from, producing smoother edges and finer detail.

# LANCZOS is the highest quality downscale filter in PIL
resized = final.resize((400, 300), Image.LANCZOS)

# Save as high-quality JPEG (will be compressed by mozjpeg next)
resized.save('temp_highquality.jpg', 'JPEG', quality=92, subsampling=0)

Key points:

• Always use Image.LANCZOS (not BILINEAR or NEAREST) for downscaling
• Use quality=92 and subsampling=0 (4:4:4 chroma) for the intermediate JPEG — this preserves detail for mozjpeg to work with
• Starting from the original CDN URL (often 3000+ pixels) produces far cleaner results than from 640x480 or even 970x728
• Never force-resize without cropping to 4:3 first — it stretches the image

Compression with mozjpeg

Use mozjpeg (https://github.com/mozilla/mozjpeg) for best JPEG compression. The Python package mozjpeg-lossless-optimization provides lossless re-encoding that typically saves 10-15% over standard JPEG encoders with no quality loss.

pip install mozjpeg-lossless-optimization

import mozjpeg_lossless_optimization as mozjpeg

with open('temp_highquality.jpg', 'rb') as f:
    input_data = f.read()

optimized = mozjpeg.optimize(input_data)

with open('components/i2c/<sensor_name>/image.jpg', 'wb') as f:
    f.write(optimized)

If the result is still over 100KB, reduce the PIL quality setting (try 85, then 80) and re-run mozjpeg optimization.

Fallback if mozjpeg is unavailable: use PIL directly with quality=85 — this usually produces files under 100KB for 400x300 product photos.

Complete image processing script

from PIL import Image
import urllib.request, io, os

# 1. Download original resolution source (best quality)
PID = '<product_id>'
IMAGE_NUM = '01'  # use image numbers scraped from product page
url = f'https://cdn-shop.adafruit.com/original/{PID}-{IMAGE_NUM}.jpg'
data = urllib.request.urlopen(url).read()
img = Image.open(io.BytesIO(data))
print(f'Source: {img.size}')

# 2. Center-crop (adjust shifts based on visual inspection)
w, h = img.size
v_shift = 75   # vertical: positive = crop from top (board was too high)
h_shift = 0    # horizontal: positive = crop from left
left = max(0, h_shift)
top = max(0, v_shift)
right = w + min(0, h_shift)
bottom = h + min(0, v_shift)
cropped = img.crop((left, top, right, bottom))

# 3. Restore exact 4:3 ratio
cw, ch = cropped.size
target_w = int(ch * 4 / 3)
target_w = target_w - (target_w % 2)
if target_w > cw:
    target_h = int(cw * 3 / 4)
    target_h = target_h - (target_h % 2)
    y_off = (ch - target_h) // 2
    final = cropped.crop((0, y_off, cw, y_off + target_h))
else:
    x_off = (cw - target_w) // 2
    final = cropped.crop((x_off, 0, x_off + target_w, ch))

# 4. High-quality resize from original resolution
resized = final.resize((, ), Image.LANCZOS)


temp_path = os.path.join(os.path.dirname(__file__)  , )
resized.save(temp_path, , quality=, subsampling=)


:
     mozjpeg_lossless_optimization  mozjpeg
     (temp_path, )  f:
        optimized = mozjpeg.optimize(f.read())
    output_path = 
     (output_path, )  f:
        f.write(optimized)
    ()
 ImportError:
    ()
    resized.save(, , quality=)


 os.path.exists(temp_path):
    os.remove(temp_path)

Platform notes

• Windows: /tmp does not exist for native Python. Use tempfile.gettempdir() or write temp files to the working directory and clean up after. When using python.exe on Windows, use forward-slash paths (C:/dev/...) — they work in Python on Windows.
• ImageMagick may not be installed. Prefer Python PIL/Pillow (pip install Pillow).
• Always clean up intermediate files (candidates, test crops, BMPs) — only definition.json and image.jpg should remain in the component folder.

Step 3 — Validate locally (if possible)

JSON schema validation

# Python validation (cross-platform, no extra tools needed)
python -c "
import json, jsonschema
schema = json.load(open('components/i2c/schema.json'))
defn = json.load(open('components/i2c/<sensor_name>/definition.json'))
jsonschema.validate(defn, schema)
print('Valid!')
"

# Or using ajv-cli if available
ajv validate -s components/i2c/schema.json -d "components/i2c/<sensor_name>/definition.json"

Image validation

# Python validation (cross-platform)
python -c "
from PIL import Image
import os
img = Image.open('components/i2c/<sensor_name>/image.jpg')
w, h = img.size
size = os.path.getsize('components/i2c/<sensor_name>/image.jpg')
ok = w == 400 and h == 300 and size < 102400
print(f'{w}x{h}, {size/1024:.1f} KB — {\"PASS\" if ok else \"FAIL\"})
"

CI checks that will run on PR

1. JSON schema validation — definition.json against schema.json
2. Filename validation — only definition.json and image.(png|jpg|jpeg|gif|svg) allowed, all lowercase, under components/<type>/<name>/
3. Image mimetype — file extension must match actual mimetype
4. Image dimensions — max 400x300, must be exactly 4:3 ratio
5. Image file size — under 100KB
6. URL validation — productURL and documentationURL must be valid URIs

Step 4 — Create PR

Branch from main, commit the component folder, and create a PR.

PR title: Add <SENSOR> component definition

PR body should follow the repo template:

### Description
<Brief description of the sensor and what it measures>

### Product URL
<Link to product page>

### Product Documentation URL
<Link to learn guide, datasheet, or documentation>

If there is a companion firmware PR in adafruit/Adafruit_Wippersnapper_Arduino, reference it in the description. Mention the AI model used in the PR title and body if known/available.

---

Worked Example: TMP119

Research

• Duplicate check: components/i2c/tmp119/ does not exist, tmp117/ does — different chip
• Web search "adafruit TMP119" -> product page https://www.adafruit.com/product/6482
• Product page links to learn guide: https://learn.adafruit.com/adafruit-tmp119-high-precision-temperature-sensor
• Vendor: Texas Instruments (TMP119 is a TI chip)
• I2C addresses: 0x48, 0x49, 0x4A, 0x4B (from datasheet, same as TMP117)
• Measures: Temperature only -> ambient-temp + ambient-temp-fahrenheit
• Closest existing component: components/i2c/tmp117/

Files created

components/i2c/tmp119/definition.json:

{
  "displayName": "TMP119",
  "vendor": "Texas Instruments",
  "productURL": "https://www.adafruit.com/product/6482",
  "documentationURL": "https://learn.adafruit.com/adafruit-tmp119-high-precision-temperature-sensor",
  "published": false,
  "i2cAddresses": ["0x48", "0x49", "0x4A", "0x4B"],
  "subcomponents": ["ambient-temp", "ambient-temp-fahrenheit"]
}

components/i2c/tmp119/image.jpg — 400x300, board centered, mozjpeg-optimized, 45KB.

Image processing

• Source: https://cdn-shop.adafruit.com/original/6482-01.jpg (3974x3056)
• Board was slightly high in frame — applied v_shift=75 to center vertically
• Resized with LANCZOS from original resolution for clean downscale
• Compressed with mozjpeg lossless optimization

Companion PR

Firmware driver PR in adafruit/Adafruit_Wippersnapper_Arduino — references this components PR.

---

Worked Example: D6T-1A (Non-Adafruit Product)

Research

• No Adafruit product page — this is an OMRON sensor sold via DigiKey
• Vendor: OMRON
• I2C address: 0x0A (fixed, no ADDR pin)
• Measures: Ambient temp + object temp (non-contact thermal IR)
• Uses object-style subcomponents because it has both ambient and object temperature readings and the display names add clarity

Files created

components/i2c/d6t1a/definition.json:

{
  "displayName": "D6T-1A Thermal Sensor",
  "description": "Non-contact MEMS thermal infrared sensor for precise temperature detection (D6T-1A-01/D6T-1A-02)",
  "vendor": "OMRON",
  "productURL": "https://www.digikey.com/en/products/detail/omron-electronics-inc-emc-div/D6T-1A-02/8602566",
  "documentationURL": "https://omronfs.omron.com/en_US/ecb/products/pdf/en_D6T_users_manual.pdf",
  "published": true,
  "i2cAddresses": ["0x0A"],
  "subcomponents": [
    {"displayName": "Ambient Temperature (°C)", "sensorType": "ambient-temp"},
    {"displayName": "Ambient Temperature (°F)", "sensorType": "ambient-temp-fahrenheit"
       
       
  

Note: Image sourced from manufacturer product page since no Adafruit CDN image exists. Third-party documentation URLs may need domain allowlisting by a maintainer before CI passes.