rtk

name	rtk
description	Install, initialize, verify, and troubleshoot RTK (Rust Token Killer) for AI coding agents. Use when you need to reduce shell-command token output, confirm that the correct `rtk` binary is installed, choose between Homebrew, install.sh, or Cargo installation, wire `rtk init` for Claude Code, Codex, Gemini CLI, Cursor, Copilot, Windsurf, Cline, or OpenCode, or use compact wrappers such as `rtk git status`, `rtk read`, `rtk grep`, `rtk test`, `rtk lint`, and `rtk gain`. Triggers on: rtk, rust token killer, token saver cli, rtk init, rtk gain, codex rtk, gemini rtk, opencode rtk, claude hook token reduction.
allowed-tools	Bash Read Write Edit Glob Grep WebFetch
license	MIT
metadata	{"tags":"rtk, rust-token-killer, token-optimization, claude-code, codex, gemini, opencode, cursor, copilot, shell-hooks","version":"1.0","source":"https://github.com/akillness/rtk"}

rtk - Rust Token Killer for AI Coding Agents

Keyword: rtk · rust token killer · rtk init · rtk gain

The target repository is the akillness/rtk fork of rtk-ai/rtk. The fork tracks upstream code, while the bundled install.sh still downloads release artifacts from rtk-ai/rtk.

RTK is a high-performance CLI proxy that rewrites common shell commands into token-optimized equivalents before their output reaches an AI agent. Use this skill to verify the right RTK binary, install or repair it, choose the correct rtk init mode for the user's agent, and fall back to direct rtk commands when no automatic hook exists.

When to use this skill

• Verify whether RTK is already installed and whether it is the correct project
• Repair the common cargo install rtk name-collision mistake
• Install RTK with Homebrew, the repository install.sh, or Cargo
• Initialize RTK for Claude Code, Codex, Gemini CLI, Cursor, Copilot, Windsurf, Cline, or OpenCode
• Explain when rtk init -g is better than local project setup
• Use direct rtk wrappers such as rtk git status, rtk read, rtk grep, rtk test, or rtk lint
• Diagnose why automatic rewriting is not happening
• Explain why built-in file tools do not pass through shell hooks and when to use direct rtk commands instead

Instructions

Step 1: Verify the current installation before reinstalling anything

Run the local status helper first:

bash scripts/check-status.sh --show

Interpret the result in this order:

1. If rtk gain works, the correct RTK is already installed. Do not reinstall unless the user wants an upgrade.
2. If rtk --version works but rtk gain fails, the user likely has the wrong rtk package, usually Rust Type Kit.
3. If rtk is missing entirely, move to installation.

The install and verification decision tree lives in references/install-and-verify.md.

Step 2: Install or repair RTK with the narrowest method that fits

Use the wrapper:

bash scripts/install.sh

Important installer choices:

• Default auto prefers Homebrew on macOS when available, then the fork's install.sh, then Cargo
• Use --method brew when Homebrew is available and the user wants a standard system-managed install
• Use --method script for the repository install script path
• Use --method cargo when the user explicitly wants a git-source build or is working from the fork
• Use --force-uninstall-wrong when the user already installed the wrong rtk

Examples:

bash scripts/install.sh --method brew
bash scripts/install.sh --method script
bash scripts/install.sh --method cargo --repo akillness/rtk
bash scripts/install.sh --force-uninstall-wrong

Keep these installation rules explicit:

• Always verify with rtk gain after installation
• Treat cargo install rtk as unsafe unless the user already confirmed the correct package
• If the install script path is used, remember the script still pulls release artifacts from rtk-ai/rtk

Step 3: Choose the correct rtk init mode for the agent

Use the init wrapper instead of hand-building flags:

bash scripts/init-agent.sh --agent claude --global

Default mapping:

• Claude Code: --agent claude --global for hook-first setup
• Codex: --agent codex --global or local --agent codex --local
• Gemini CLI: --agent gemini --global
• Cursor: --agent cursor --global
• Copilot: --agent copilot --global
• OpenCode: --agent opencode --global
• Windsurf: --agent windsurf --local
• Cline / Roo Code: --agent cline --local

Good follow-up checks:

bash scripts/init-agent.sh --agent claude --global --auto-patch
bash scripts/init-agent.sh --agent codex --global
bash scripts/init-agent.sh --agent opencode --global
bash scripts/init-agent.sh --agent claude --show

Read references/platform-init.md when the user needs the per-agent hook type, scope, or uninstall behavior.

Step 4: Use direct RTK commands when hooks are absent or insufficient

Automatic rewrite only applies where the agent actually executes shell commands through a supported hook or plugin. Prompt-only integrations such as Codex, Windsurf, and Cline still benefit from explicit rtk commands, but they do not transparently mutate built-in file tools.

Use direct commands when:

• The agent uses a built-in Read, Grep, or Glob tool instead of shell
• The workflow is in Codex and the user wants compact output immediately
• The user wants deterministic verification independent of hook state

Common commands:

rtk git status
rtk read src/main.rs
rtk grep "pattern" .
rtk test cargo test
rtk lint
rtk gain

The command families and config knobs are summarized in references/commands-and-config.md.

Step 5: Diagnose failures explicitly

Use bash scripts/check-status.sh --show as the first diagnostic pass, then branch:

• Wrong binary installed: fix the name collision and reinstall
• Hook missing or stale: rerun the correct rtk init mode
• Agent still verbose: confirm whether the task used shell commands or built-in tools
• PATH issue: ensure ~/.local/bin or ~/.cargo/bin is on PATH
• Windows wrapper failure: recommend RTK 0.23.1+

The troubleshooting matrix is in references/troubleshooting.md.

Examples

Example 1: Verify whether the correct RTK is already installed

bash scripts/check-status.sh --show

Example 2: Install from the fork-aware script path

bash scripts/install.sh --method script --repo akillness/rtk

Example 3: Repair the wrong cargo install rtk package

bash scripts/install.sh --force-uninstall-wrong --method cargo

Example 4: Claude Code global hook setup

bash scripts/init-agent.sh --agent claude --global --auto-patch

Example 5: Codex global prompt setup

bash scripts/init-agent.sh --agent codex --global

Example 6: OpenCode plugin install

bash scripts/init-agent.sh --agent opencode --global

Example 7: Use RTK directly for compact output

rtk read Cargo.toml
rtk grep "rtk init" README.md
rtk test cargo test

Example 8: Temporarily bypass rewrite for one command

RTK_DISABLED=1 git status

Best practices

1. Check rtk gain before reinstalling; it is the quickest way to distinguish the correct RTK from the wrong package.
2. Use the lightest install path that meets the user's needs: Homebrew for convenience, install script for release binaries, Cargo for source-driven workflows.
3. Treat rtk init -g as the normal path for hook-capable agents and local rules files as the normal path for Windsurf and Cline.
4. Use rtk init --show after setup or upgrades so stale hook state is visible immediately.
5. Remember that built-in read/search tools do not pass through shell hooks; switch to shell commands or direct rtk wrappers when token savings matter.
6. Keep RTK_DISABLED=1 in mind for one-off passthrough commands instead of uninstalling hooks.
7. Re-run the installer plus rtk init after RTK upgrades because hook artifacts can change between releases.
8. When users say "RTK is broken", separate installation correctness, hook registration, and actual command path before proposing a fix.

References

• references/install-and-verify.md
• references/platform-init.md
• references/commands-and-config.md
• references/troubleshooting.md
• scripts/install.sh
• scripts/init-agent.sh
• scripts/check-status.sh
• RTK Repository Fork
• Upstream RTK Project