ring-testing-agents-with-subagents

name	ring:testing-agents-with-subagents
description	Agent testing methodology - run agents with test inputs, observe outputs, iterate until outputs are accurate and well-structured.
trigger	- Before deploying a new agent - After editing an existing agent - Agent produces structured outputs that must be accurate
skip_when	- Agent is simple passthrough → minimal testing needed - Agent already tested for this use case
related	{"complementary":["ring:test-driven-development"]}

Testing Agents With Subagents

Overview

Testing agents is TDD applied to AI worker definitions.

You run agents with known test inputs (RED - observe incorrect outputs), fix the agent definition (GREEN - outputs now correct), then handle edge cases (REFACTOR - robust under all conditions).

Core principle: If you didn't run an agent with test inputs and verify its outputs, you don't know if the agent works correctly.

REQUIRED BACKGROUND: You MUST understand ring:test-driven-development before using this skill. That skill defines the fundamental RED-GREEN-REFACTOR cycle. This skill provides agent-specific test formats (test inputs, output verification, accuracy metrics).

Key difference from testing-skills-with-subagents:

• Skills = instructions that guide behavior; test if agent follows rules under pressure
• Agents = separate Claude instances via Task tool; test if they produce correct outputs

The Iron Law

NO AGENT DEPLOYMENT WITHOUT RED-GREEN-REFACTOR TESTING FIRST

About to deploy an agent without completing the test cycle? You have ONLY one option:

STOP. TEST FIRST. THEN DEPLOY.

You CANNOT:

• ❌ "Deploy and monitor for issues"
• ❌ "Test with first real usage"
• ❌ "Quick smoke test is enough"
• ❌ "Tested manually in Claude UI"
• ❌ "One test case passed"
• ❌ "Agent prompt looks correct"
• ❌ "Based on working template"
• ❌ "Deploy now, test in parallel"
• ❌ "Production is down, no time to test"

ZERO exceptions. Simple agent, expert confidence, time pressure, production outage - NONE override testing.

Why this is absolute: Untested agents fail in production. Every time. The question is not IF but WHEN and HOW BADLY. A 20-minute test suite prevents hours of debugging and lost trust.

When to Use

Test agents that:

• Analyze code/designs and produce findings (reviewers)
• Generate structured outputs (planners, analyzers)
• Make decisions or categorizations (severity, priority)
• Have defined output schemas that must be followed
• Are used in parallel workflows where consistency matters

Test exemptions require explicit human partner approval:

• Simple pass-through agents (just reformatting) - only if human partner confirms
• Agents without structured outputs - only if human partner confirms
• You CANNOT self-determine test exemption
• When in doubt → TEST

TDD Mapping for Agent Testing

TDD Phase	Agent Testing	What You Do
RED	Run with test inputs	Dispatch agent, observe incorrect/incomplete outputs
Verify RED	Document failures	Capture exact output issues verbatim
GREEN	Fix agent definition	Update prompt/schema to address failures
Verify GREEN	Re-run tests	Agent now produces correct outputs
REFACTOR	Test edge cases	Ambiguous inputs, empty inputs, complex scenarios
Stay GREEN	Re-verify all	Previous tests still pass after changes

Same cycle as code TDD, different test format.

RED Phase: Baseline Testing (Observe Failures)

Goal: Run agent with known test inputs - observe what's wrong, document exact failures.

This is identical to TDD's "write failing test first" - you MUST see what the agent actually produces before fixing the definition.

Process:

• Create test inputs (known issues, edge cases, clean inputs)
• Run agent - dispatch via Task tool with test inputs
• Compare outputs - expected vs actual
• Document failures - missing findings, wrong severity, bad format
• Identify patterns - which input types cause failures?

Test Input Categories

Category	Purpose	Example
Known Issues	Verify agent finds real problems	Code with SQL injection, hardcoded secrets
Clean Inputs	Verify no false positives	Well-written code with no issues
Edge Cases	Verify robustness	Empty files, huge files, unusual patterns
Ambiguous Cases	Verify judgment	Code that could go either way
Severity Calibration	Verify severity accuracy	Mix of critical, high, medium, low issues

Minimum Test Suite Requirements

Before deploying ANY agent, you MUST have:

Agent Type	Minimum Test Cases	Required Coverage
Reviewer agents	6 tests	2 known issues, 2 clean, 1 edge case, 1 ambiguous
Analyzer agents	5 tests	2 typical, 1 empty, 1 large, 1 malformed
Decision agents	4 tests	2 clear cases, 2 boundary cases
Planning agents	5 tests	2 standard, 1 complex, 1 minimal, 1 edge case

Fewer tests = incomplete testing = DO NOT DEPLOY.

One test case proves nothing. Three tests are suspicious. Six tests are minimum for confidence.

Example Test Suite for Code Reviewer

Test	Input	Expected
SQL Injection	String concatenation in SQL	CRITICAL, OWASP A03:2021
Clean Auth	Proper JWT validation	No findings or LOW only
Ambiguous Error	Caught but only logged	MEDIUM silent failure
Empty File	Empty source	Graceful handling

Running the Test

Dispatch via Task tool with test input → Document exact output verbatim (don't summarize).

GREEN Phase: Fix Agent Definition (Make Tests Pass)

Write/update agent definition addressing specific failures documented in RED phase.

Common fixes:

Failure Type	Fix Approach
Missing findings	Add explicit instructions to check for X
Wrong severity	Add severity calibration examples
Bad output format	Add output schema with examples
False positives	Add "don't flag X when Y" instructions
Incomplete analysis	Add "always check A, B, C" checklist

Example Fix: Severity Calibration

RED Failure: Agent marked hardcoded password as MEDIUM instead of CRITICAL

GREEN Fix: Add severity calibration: CRITICAL (hardcoded secrets, SQL injection, auth bypass), HIGH (missing validation, error exposure), MEDIUM (rate limiting, verbose errors), LOW (headers, deps)

Re-run Tests

After fixing, re-run ALL test cases. If any fail → continue fixing, re-test.

VERIFY GREEN: Output Verification

Goal: Confirm agent produces correct, well-structured outputs consistently.

Accuracy Metrics

Metric	Target
True Positives	100%
False Positives	<10%
False Negatives	<5%
Severity Accuracy	>90%
Schema Compliance	100%

Consistency Testing

Run same input 3 times → outputs should be identical. Inconsistency indicates ambiguous agent definition.

REFACTOR Phase: Edge Cases and Robustness

Agent passes basic tests? Now test edge cases.

Edge Case Categories

Category	Test Cases
Empty/Null	Empty file, null input, whitespace only
Large	10K line file, deeply nested code
Unusual	Minified code, generated code, config files
Multi-language	Mixed JS/TS, embedded SQL, templates
Ambiguous	Code that could be good or bad depending on context

Stress Testing

Test edge cases: Large file (5000 lines, 20 issues), Complex nesting (15-level deep). Verify all issues found with reasonable response time.

Ambiguity Testing

Test context-dependent cases (e.g., hardcoded password with "local dev" comment). Agent should flag but acknowledge context.

Plugging Holes

For each edge case failure, add explicit handling to agent definition:

• Empty files: Return "No code to review" with PASS
• Large files: Focus on high-risk patterns first
• Minified code: Note limitations
• Context comments: Consider but don't use to dismiss issues

Testing Parallel Agent Workflows

When agents run in parallel (like 3 reviewers), test combined workflow:

• Parallel Consistency: Same input to all reviewers → check findings overlap appropriately, no contradictions
• Aggregation Testing: Same issue found by multiple reviewers → severity should be consistent; fix misalignments

Agent Testing Checklist

RED Phase: Create test inputs (known issues, clean, edge cases) → Run agent → Document failures verbatim

GREEN Phase: Update agent definition → Re-run tests → All pass

REFACTOR Phase: Test edge cases → Test stress scenarios → Add explicit handling → Verify consistency (3+ runs) → Test parallel integration (if applicable) → Re-run ALL tests after each change

Metrics (reviewer agents): True positive >95%, False positive <10%, False negative <5%, Severity accuracy >90%, Schema compliance 100%, Consistency >95%

Prohibited Testing Shortcuts

You CANNOT substitute proper testing with:

Shortcut	Why It Fails
Reading agent definition carefully	Reading ≠ executing. Must run agent with inputs.
Manual testing in Claude UI	Ad-hoc ≠ reproducible. No baseline documented.
"Looks good to me" review	Visual inspection misses runtime failures.
Basing on proven template	Templates need validation for YOUR use case.
Expert prompt engineering knowledge	Expertise doesn't prevent bugs. Tests do.
Testing after first production use	Production is not QA. Test before deployment.
Monitoring production for issues	Reactive ≠ proactive. Catch issues before users do.
Deploy now, test in parallel	Parallel testing still means untested code in production.

ALL require running agent with documented test inputs and comparing outputs.

Testing Agent Modifications

EVERY agent edit requires re-running the FULL test suite:

Change Type	Required Action
Prompt wording changes	Full re-test
Severity calibration updates	Full re-test
Output schema modifications	Full re-test
Adding edge case handling	Full re-test
"Small" one-line changes	Full re-test
Typo fixes in prompt	Full re-test

"Small change" is not an exception. One-line prompt changes can completely alter LLM behavior. Re-test always.

Common Mistakes

Mistake	Fix
Testing only "happy path" inputs	Include ambiguous + edge cases
Not documenting exact outputs	Capture verbatim, compare to expected
Fixing without re-running all tests	Re-run entire suite after each change
Testing single agent in isolation (parallel workflow)	Test parallel dispatch + aggregation
Not testing consistency	Run same input 3+ times
Skipping severity calibration	Add explicit severity examples
Not testing edge cases	Test empty, large, unusual, ambiguous
Single test case validation	Minimum 4-6 test cases per agent type
Manual UI testing as substitute	Document all test inputs and expected outputs
Skipping re-test for "small" changes	Re-run full suite after ANY modification

Rationalization Table

Excuse	Reality
"Agent prompt is obviously correct"	Obvious prompts fail in practice. Test proves correctness.
"Tested manually in Claude UI"	Ad-hoc ≠ reproducible. No baseline documented.
"One test case passed"	Sample size = 1 proves nothing. Need 4-6 cases minimum.
"Will test after first production use"	Production is not QA. Test before deployment. Always.
"Reading prompt is sufficient review"	Reading ≠ executing. Must run agent with inputs.
"Changes are small, re-test unnecessary"	Small changes cause big failures. Re-run full suite.
"Based agent on proven template"	Templates need validation for your use case. Test anyway.
"Expert in prompt engineering"	Expertise doesn't prevent bugs. Tests do.
"Production is down, no time to test"	Deploying untested fix may make outage worse. Test first.
"Deploy now, test in parallel"	Untested code in production = unknown behavior. Unacceptable.
"Quick smoke test is enough"	Smoke test misses edge cases. Full suite required.
"Simple pass-through agent"	You cannot self-determine exemptions. Get human approval.

Red Flags - STOP and Test Now

If you catch yourself thinking ANY of these, STOP. You're about to violate the Iron Law:

• Agent edited but tests not re-run
• "Looks good" without execution
• Single test case only
• No documented baseline
• No edge case testing
• Manual verification only
• "Will test in production"
• "Based on template, should work"
• "Just a small prompt change"
• "No time to test properly"
• "One quick test is enough"
• "Agent is simple, obviously works"
• "Expert intuition says it's fine"
• "Production is down, skip testing"
• "Deploy now, test in parallel"

All of these mean: STOP. Run full RED-GREEN-REFACTOR cycle NOW.

Quick Reference (TDD Cycle for Agents)

TDD Phase	Agent Testing	Success Criteria
RED	Run with test inputs	Document exact output failures
Verify RED	Capture verbatim	Have specific issues to fix
GREEN	Fix agent definition	All basic tests pass
Verify GREEN	Re-run all tests	No regressions
REFACTOR	Test edge cases	Robust under all conditions
Stay GREEN	Full test suite	All tests pass, metrics met

Example: Testing a New Reviewer Agent

Step 1: Create Test Suite

Test	Input	Expected
SQL Injection	"SELECT * FROM users WHERE id = " + user_id	CRITICAL, OWASP A03:2021
Parameterized (Clean)	db.execute(query, [user_id])	No findings
Hardcoded Secret	API_KEY = "sk-1234..."	CRITICAL
Env Variable (Clean)	os.environ.get("API_KEY")	No findings
Empty File	(empty)	Graceful handling
Ambiguous	password = "dev123" # Local dev	Flag with context

Step 2: RED Phase - Run tests, document failures: Test 1 marked HIGH not CRITICAL, Test 3 missed, Test 5 errored, Test 6 dismissed.

Step 3: GREEN Phase - Fix definition: Add severity calibration (SQL=CRITICAL), hardcoded secrets pattern, empty file handling, "context comments dont dismiss issues".

Step 4: Re-run - All tests pass with correct severities and handling.

Step 5: REFACTOR - Add edge cases: minified code, 10K line file, mixed languages, nested vulnerabilities. Run, fix, repeat.

The Bottom Line

Agent testing IS TDD. Same principles, same cycle, same benefits.

If you wouldn't deploy code without tests, don't deploy agents without testing them.

RED-GREEN-REFACTOR for agents works exactly like RED-GREEN-REFACTOR for code:

1. RED: See what's wrong (run with test inputs)
2. GREEN: Fix it (update agent definition)
3. REFACTOR: Make it robust (edge cases, consistency)

Evidence before deployment. Always.