name	benchmark-models
preamble-tier	1
version	1.0.0
description	Cross-model benchmark for gstack skills. (gstack)
triggers	["cross model benchmark","compare claude gpt gemini","benchmark skill across models","which model should I use"]
allowed-tools	["Bash","Read","AskUserQuestion"]

When to invoke this skill

Runs the same prompt through Claude, GPT (via Codex CLI), and Gemini side-by-side — compares latency, tokens, cost, and optionally quality via LLM judge. Answers "which model is actually best for this skill?" with data instead of vibes. Separate from /benchmark, which measures web page performance. Use when: "benchmark models", "compare models", "which model is best for X", "cross-model comparison", "model shootout".

Voice triggers (speech-to-text aliases): "compare models", "model shootout", "which model is best".

Preamble (run first)

_UPD=$(~/.claude/skills/gstack/bin/gstack-update-check 2>/dev/null || .claude/skills/gstack/bin/gstack-update-check 2>/dev/null || true)
[ -n "$_UPD" ] && echo "$_UPD" || true
mkdir -p ~/.gstack/sessions
touch ~/.gstack/sessions/"$PPID"
_SESSIONS=$(find ~/.gstack/sessions -mmin -120 -type f 2>/dev/null | wc -l | tr -d ' ')
find ~/.gstack/sessions -mmin +120 -type f -exec rm {} + 2>/dev/null || true
_PROACTIVE=$(~/.claude/skills/gstack/bin/gstack-config get proactive 2>/dev/null || echo "true")
_PROACTIVE_PROMPTED=$([ -f ~/.gstack/.proactive-prompted ] && echo "yes" || echo "no")
_BRANCH=$(git branch --show-current 2>/dev/null || echo "unknown")
echo "BRANCH: $_BRANCH"
_SKILL_PREFIX=$(~/.claude/skills/gstack/bin/gstack-config get skill_prefix 2>/dev/null || echo "false")
echo "PROACTIVE: $_PROACTIVE"
echo "PROACTIVE_PROMPTED: $_PROACTIVE_PROMPTED"
echo "SKILL_PREFIX: $_SKILL_PREFIX"
source <(~/.claude/skills/gstack/bin/gstack-repo-mode 2>/dev/null) || true
REPO_MODE=${REPO_MODE:-unknown}
echo "REPO_MODE: $REPO_MODE"
_SESSION_KIND=$(~/.claude/skills/gstack/bin/gstack-session-kind 2>/dev/null || echo "interactive")
case "$_SESSION_KIND" in spawned|headless|interactive) ;; *) _SESSION_KIND="interactive" ;; esac
echo "SESSION_KIND: $_SESSION_KIND"
# Conductor host: AskUserQuestion is unreliable here (native disabled, MCP
# variant flaky), so skills render decisions as prose instead of calling the
# tool. Gated on !headless so an eval/CI run INSIDE Conductor (GSTACK_HEADLESS)
# still BLOCKs rather than rendering prose to nobody.
if [ "$_SESSION_KIND" != "headless" ] && { [ -n "${CONDUCTOR_WORKSPACE_PATH:-}" ] || [ -n "${CONDUCTOR_PORT:-}" ]; }; then
  echo "CONDUCTOR_SESSION: true"
fi
_ACTIVATED=$([ -f ~/.gstack/.activated ] && echo "yes" || echo "no")
_FIRST_LOOP_SHOWN=$([ -f ~/.gstack/.first-loop-tip-shown ] && echo "yes" || echo "no")
echo "ACTIVATED: $_ACTIVATED"
echo "FIRST_LOOP_SHOWN: $_FIRST_LOOP_SHOWN"
# First-run project detection: run the detector ONLY on the first-ever skill run
# (ACTIVATED=no, interactive) so it stays off the hot path for every run after.
_FIRST_TASK=""
if [ "$_ACTIVATED" = "no" ] && [ "$_SESSION_KIND" != "headless" ]; then
  _FIRST_TASK=$(~/.claude/skills/gstack/bin/gstack-first-task-detect 2>/dev/null || true)
fi
echo "FIRST_TASK: $_FIRST_TASK"
_LAKE_SEEN=$([ -f ~/.gstack/.completeness-intro-seen ] && echo "yes" || echo "no")
echo "LAKE_INTRO: $_LAKE_SEEN"
_TEL=$(~/.claude/skills/gstack/bin/gstack-config get telemetry 2>/dev/null || true)
_TEL_PROMPTED=$([ -f ~/.gstack/.telemetry-prompted ] && echo "yes" || echo "no")
_TEL_START=$(date +%s)
_SESSION_ID="$$-$(date +%s)"
echo "TELEMETRY: ${_TEL:-off}"
echo "TEL_PROMPTED: $_TEL_PROMPTED"
_EXPLAIN_LEVEL=$(~/.claude/skills/gstack/bin/gstack-config get explain_level 2>/dev/null || echo "default")
if [ "$_EXPLAIN_LEVEL" != "default" ] && [ "$_EXPLAIN_LEVEL" != "terse" ]; then _EXPLAIN_LEVEL="default"; fi
echo "EXPLAIN_LEVEL: $_EXPLAIN_LEVEL"
_QUESTION_TUNING=$(~/.claude/skills/gstack/bin/gstack-config get question_tuning 2>/dev/null || echo "false")
echo "QUESTION_TUNING: $_QUESTION_TUNING"
mkdir -p ~/.gstack/analytics
if [ "$_TEL" != "off" ]; then
echo '{"skill":"benchmark-models","ts":"'$(date -u +%Y-%m-%dT%H:%M:%SZ)'","repo":"'$(_repo=$(basename "$(git rev-parse --show-toplevel 2>/dev/null)" 2>/dev/null | tr -cd 'a-zA-Z0-9._-'); echo "${_repo:-unknown}")'"}'  >> ~/.gstack/analytics/skill-usage.jsonl 2>/dev/null || true
fi
for _PF in $(find ~/.gstack/analytics -maxdepth 1 -name '.pending-*' 2>/dev/null); do
  if [ -f "$_PF" ]; then
    if [ "$_TEL" != "off" ] && [ -x "~/.claude/skills/gstack/bin/gstack-telemetry-log" ]; then
      ~/.claude/skills/gstack/bin/gstack-telemetry-log --event-type skill_run --skill _pending_finalize --outcome unknown --session-id "$_SESSION_ID" 2>/dev/null || true
    fi
    rm -f "$_PF" 2>/dev/null || true
  fi
  break
done
eval "$(~/.claude/skills/gstack/bin/gstack-slug 2>/dev/null)" 2>/dev/null || true
_LEARN_FILE="${GSTACK_HOME:-$HOME/.gstack}/projects/${SLUG:-unknown}/learnings.jsonl"
if [ -f "$_LEARN_FILE" ]; then
  _LEARN_COUNT=$(wc -l < "$_LEARN_FILE" 2>/dev/null | tr -d ' ')
  echo "LEARNINGS: $_LEARN_COUNT entries loaded"
  if [ "$_LEARN_COUNT" -gt 5 ] 2>/dev/null; then
    ~/.claude/skills/gstack/bin/gstack-learnings-search --limit 3 2>/dev/null || true
  fi
else
  echo "LEARNINGS: 0"
fi
~/.claude/skills/gstack/bin/gstack-timeline-log '{"skill":"benchmark-models","event":"started","branch":"'"$_BRANCH"'","session":"'"$_SESSION_ID"'"}' 2>/dev/null &
_HAS_ROUTING="no"
if [ -f CLAUDE.md ] && grep -q "## Skill routing" CLAUDE.md 2>/dev/null; then
  _HAS_ROUTING="yes"
fi
_ROUTING_DECLINED=$(~/.claude/skills/gstack/bin/gstack-config get routing_declined 2>/dev/null || echo "false")
echo "HAS_ROUTING: $_HAS_ROUTING"
echo "ROUTING_DECLINED: $_ROUTING_DECLINED"
_VENDORED="no"
if [ -d ".claude/skills/gstack" ] && [ ! -L ".claude/skills/gstack" ]; then
  if [ -f ".claude/skills/gstack/VERSION" ] || [ -d ".claude/skills/gstack/.git" ]; then
    _VENDORED="yes"
  fi
fi
echo "VENDORED_GSTACK: $_VENDORED"
echo "MODEL_OVERLAY: claude"
_CHECKPOINT_MODE=$(~/.claude/skills/gstack/bin/gstack-config get checkpoint_mode 2>/dev/null || echo "explicit")
_CHECKPOINT_PUSH=$(~/.claude/skills/gstack/bin/gstack-config get checkpoint_push 2>/dev/null || echo "false")
echo "CHECKPOINT_MODE: $_CHECKPOINT_MODE"
echo "CHECKPOINT_PUSH: $_CHECKPOINT_PUSH"
# Plan-mode hint for skills like /spec that branch behavior on plan-mode state.
# Claude Code exposes plan mode via system reminders; we detect best-effort
# from CLAUDE_PLAN_FILE (set by the harness when plan mode is active) and
# fall back to "inactive". Codex hosts and Claude execution mode both end up
# inactive, which is the safe default (defaults to file+execute pipeline).
if [ -n "${CLAUDE_PLAN_FILE:-}${GSTACK_PLAN_MODE_FORCE:-}" ]; then
  export GSTACK_PLAN_MODE="active"
elif [ "${GSTACK_PLAN_MODE:-}" = "active" ]; then
  export GSTACK_PLAN_MODE="active"
else
  export GSTACK_PLAN_MODE="inactive"
fi
echo "GSTACK_PLAN_MODE: $GSTACK_PLAN_MODE"
[ -n "$OPENCLAW_SESSION" ] && echo "SPAWNED_SESSION: true" || true

Plan Mode Safe Operations

In plan mode, allowed because they inform the plan: $B, $D, codex exec/codex review, writes to ~/.gstack/, writes to the plan file, and open for generated artifacts.

Skill Invocation During Plan Mode

If the user invokes a skill in plan mode, the skill takes precedence over generic plan mode behavior. Treat the skill file as executable instructions, not reference. Follow it step by step starting from Step 0; the first AskUserQuestion is the workflow entering plan mode, not a violation of it. AskUserQuestion (any variant — mcp__*__AskUserQuestion or native; see "AskUserQuestion Format → Tool resolution") satisfies plan mode's end-of-turn requirement. If AskUserQuestion is unavailable or a call fails, follow the AskUserQuestion Format failure fallback: headless → BLOCKED; interactive → the prose fallback (also satisfies end-of-turn). At a STOP point, stop immediately. Do not continue the workflow or call ExitPlanMode there. Commands marked "PLAN MODE EXCEPTION — ALWAYS RUN" execute. Call ExitPlanMode only after the skill workflow completes, or if the user tells you to cancel the skill or leave plan mode.

If PROACTIVE is "false", do not auto-invoke or proactively suggest skills. If a skill seems useful, ask: "I think /skillname might help here — want me to run it?"

If SKILL_PREFIX is "true", suggest/invoke /gstack-* names. Disk paths stay ~/.claude/skills/gstack/[skill-name]/SKILL.md.

If output shows UPGRADE_AVAILABLE <old> <new>: read ~/.claude/skills/gstack/gstack-upgrade/SKILL.md and follow the "Inline upgrade flow" (auto-upgrade if configured, otherwise AskUserQuestion with 4 options, write snooze state if declined).

If output shows JUST_UPGRADED <from> <to>: print "Running gstack v{to} (just updated!)". If SPAWNED_SESSION is true, skip feature discovery.

Feature discovery, max one prompt per session:

Missing ~/.claude/skills/gstack/.feature-prompted-continuous-checkpoint: AskUserQuestion for Continuous checkpoint auto-commits. If accepted, run ~/.claude/skills/gstack/bin/gstack-config set checkpoint_mode continuous. Always touch marker.
Missing ~/.claude/skills/gstack/.feature-prompted-model-overlay: inform "Model overlays are active. MODEL_OVERLAY shows the patch." Always touch marker.

After upgrade prompts, continue workflow.

If WRITING_STYLE_PENDING is yes: ask once about writing style:

v1 prompts are simpler: first-use jargon glosses, outcome-framed questions, shorter prose. Keep default or restore terse?

Options:

A) Keep the new default (recommended — good writing helps everyone)
B) Restore V0 prose — set explain_level: terse

If A: leave explain_level unset (defaults to default). If B: run ~/.claude/skills/gstack/bin/gstack-config set explain_level terse.

Always run (regardless of choice):

rm -f ~/.gstack/.writing-style-prompt-pending
touch ~/.gstack/.writing-style-prompted

Skip if WRITING_STYLE_PENDING is no.

If LAKE_INTRO is no: say "gstack follows the Boil the Ocean principle — do the complete thing when AI makes marginal cost near-zero. Read more: https://garryslist.org/posts/boil-the-ocean" Offer to open:

open https://garryslist.org/posts/boil-the-ocean
touch ~/.gstack/.completeness-intro-seen

Only run open if yes. Always run touch.

If TEL_PROMPTED is no AND LAKE_INTRO is yes: ask telemetry once via AskUserQuestion:

Help gstack get better. Share usage data only: skill, duration, crashes, stable device ID. No code or file paths. Your repo name is recorded locally only and stripped before any upload.

Options:

A) Help gstack get better! (recommended)
B) No thanks

If A: run ~/.claude/skills/gstack/bin/gstack-config set telemetry community

If B: ask follow-up:

Anonymous mode sends only aggregate usage, no unique ID.

Options:

A) Sure, anonymous is fine
B) No thanks, fully off

If B→A: run ~/.claude/skills/gstack/bin/gstack-config set telemetry anonymous If B→B: run ~/.claude/skills/gstack/bin/gstack-config set telemetry off

Always run:

touch ~/.gstack/.telemetry-prompted

Skip if TEL_PROMPTED is yes.

If PROACTIVE_PROMPTED is no AND TEL_PROMPTED is yes: ask once:

Let gstack proactively suggest skills, like /qa for "does this work?" or /investigate for bugs?

Options:

A) Keep it on (recommended)
B) Turn it off — I'll type /commands myself

If A: run ~/.claude/skills/gstack/bin/gstack-config set proactive true If B: run ~/.claude/skills/gstack/bin/gstack-config set proactive false

Always run:

touch ~/.gstack/.proactive-prompted

Skip if PROACTIVE_PROMPTED is yes.

First-run guidance (one-time)

If ACTIVATED is no (first skill run on this machine) AND the preamble printed a non-empty FIRST_TASK: value that is NOT nongit: show ONE short, project-specific line mapped from the token, as a heads-up, then CONTINUE with whatever the user actually asked — do NOT halt their task. Map the token: greenfield → "Fresh repo — shape it first with /spec or /office-hours." code_node/code_python/code_rust/code_go/code_ruby/code_ios → "There's code here — /qa to see it work, or /investigate if something's off." branch_ahead → "Unshipped work on this branch — /review then /ship." dirty_default → "Uncommitted changes — /review before committing." clean_default → "Pick one: /spec, /investigate, or /qa." Then substitute the token you saw for TASK_TOKEN and run (best-effort), and mark activated:

~/.claude/skills/gstack/bin/gstack-telemetry-log --event-type first_task_scaffold_shown --skill "TASK_TOKEN" --outcome shown 2>/dev/null || true
touch ~/.gstack/.activated 2>/dev/null || true

If ACTIVATED is no but FIRST_TASK: is empty or nongit (headless, non-git, or nothing actionable): show nothing, just run touch ~/.gstack/.activated 2>/dev/null || true.

Else if ACTIVATED is yes AND FIRST_LOOP_SHOWN is no: say once as a heads-up (then continue):

Tip: gstack pays off when you complete one loop — plan → review → ship. A common first loop: /office-hours or /spec to shape it, /plan-eng-review to lock it, then /ship.

Then run touch ~/.gstack/.first-loop-tip-shown 2>/dev/null || true.

Skip this section if ACTIVATED and FIRST_LOOP_SHOWN are both yes.

If HAS_ROUTING is no AND ROUTING_DECLINED is false AND PROACTIVE_PROMPTED is yes: Check if a CLAUDE.md file exists in the project root. If it does not exist, create it.

Use AskUserQuestion:

gstack works best when your project's CLAUDE.md includes skill routing rules.

Options:

A) Add routing rules to CLAUDE.md (recommended)
B) No thanks, I'll invoke skills manually

If A: Append this section to the end of CLAUDE.md:


## Skill routing

When the user's request matches an available skill, invoke it via the Skill tool. When in doubt, invoke the skill.

Key routing rules:
- Product ideas/brainstorming → invoke /office-hours
- Strategy/scope → invoke /plan-ceo-review
- Architecture → invoke /plan-eng-review
- Design system/plan review → invoke /design-consultation or /plan-design-review
- Full review pipeline → invoke /autoplan
- Bugs/errors → invoke /investigate
- QA/testing site behavior → invoke /qa or /qa-only
- Code review/diff check → invoke /review
- Visual polish → invoke /design-review
- Ship/deploy/PR → invoke /ship or /land-and-deploy
- Save progress → invoke /context-save
- Resume context → invoke /context-restore
- Author a backlog-ready spec/issue → invoke /spec

Then commit the change: git add CLAUDE.md && git commit -m "chore: add gstack skill routing rules to CLAUDE.md"

If B: run ~/.claude/skills/gstack/bin/gstack-config set routing_declined true and say they can re-enable with gstack-config set routing_declined false.

This only happens once per project. Skip if HAS_ROUTING is yes or ROUTING_DECLINED is true.

If VENDORED_GSTACK is yes, warn once via AskUserQuestion unless ~/.gstack/.vendoring-warned-$SLUG exists:

This project has gstack vendored in .claude/skills/gstack/. Vendoring is deprecated. Migrate to team mode?

Options:

A) Yes, migrate to team mode now
B) No, I'll handle it myself

If A:

Run git rm -r .claude/skills/gstack/
Run echo '.claude/skills/gstack/' >> .gitignore
Run ~/.claude/skills/gstack/bin/gstack-team-init required (or optional)
Run git add .claude/ .gitignore CLAUDE.md && git commit -m "chore: migrate gstack from vendored to team mode"
Tell the user: "Done. Each developer now runs: cd ~/.claude/skills/gstack && ./setup --team"

If B: say "OK, you're on your own to keep the vendored copy up to date."

Always run (regardless of choice):

eval "$(~/.claude/skills/gstack/bin/gstack-slug 2>/dev/null)" 2>/dev/null || true
touch ~/.gstack/.vendoring-warned-${SLUG:-unknown}

If marker exists, skip.

If SPAWNED_SESSION is "true", you are running inside a session spawned by an AI orchestrator (e.g., OpenClaw). In spawned sessions:

Do NOT use AskUserQuestion for interactive prompts. Auto-choose the recommended option.
Do NOT run upgrade checks, telemetry prompts, routing injection, or lake intro.
Focus on completing the task and reporting results via prose output.
End with a completion report: what shipped, decisions made, anything uncertain.

Artifacts Sync (skill start)

_GSTACK_HOME="${GSTACK_HOME:-$HOME/.gstack}"
# Prefer the v1.27.0.0 artifacts file; fall back to brain file for users
# upgrading mid-stream before the migration script runs.
if [ -f "$HOME/.gstack-artifacts-remote.txt" ]; then
  _BRAIN_REMOTE_FILE="$HOME/.gstack-artifacts-remote.txt"
else
  _BRAIN_REMOTE_FILE="$HOME/.gstack-brain-remote.txt"
fi
_BRAIN_SYNC_BIN="~/.claude/skills/gstack/bin/gstack-brain-sync"
_BRAIN_CONFIG_BIN="~/.claude/skills/gstack/bin/gstack-config"

# /sync-gbrain context-load: teach the agent to use gbrain when it's available.
# Per-worktree pin: post-spike redesign uses kubectl-style `.gbrain-source` in the
# git toplevel to scope queries. Look for the pin in the worktree (not a global
# state file) so that opening worktree B without a pin doesn't claim "indexed"
# just because worktree A was synced. Empty string when gbrain is not
# configured (zero context cost for non-gbrain users).
_GBRAIN_CONFIG="$HOME/.gbrain/config.json"
if [ -f "$_GBRAIN_CONFIG" ] && command -v gbrain >/dev/null 2>&1; then
  _GBRAIN_VERSION_OK=$(gbrain --version 2>/dev/null | grep -c '^gbrain ' || echo 0)
  if [ "$_GBRAIN_VERSION_OK" -gt 0 ] 2>/dev/null; then
    _GBRAIN_PIN_PATH=""
    _REPO_TOP=$(git rev-parse --show-toplevel 2>/dev/null || echo "")
    if [ -n "$_REPO_TOP" ] && [ -f "$_REPO_TOP/.gbrain-source" ]; then
      _GBRAIN_PIN_PATH="$_REPO_TOP/.gbrain-source"
    fi
    if [ -n "$_GBRAIN_PIN_PATH" ]; then
      echo "GBrain configured. Prefer \`gbrain search\`/\`gbrain query\` over Grep for"
      echo "semantic questions; use \`gbrain code-def\`/\`code-refs\`/\`code-callers\` for"
      echo "symbol-aware code lookup. See \"## GBrain Search Guidance\" in CLAUDE.md."
      echo "Run /sync-gbrain to refresh."
    else
      echo "GBrain configured but this worktree isn't pinned yet. Run \`/sync-gbrain --full\`"
      echo "before relying on \`gbrain search\` for code questions in this worktree."
      echo "Falls back to Grep until pinned."
    fi
  fi
fi

_BRAIN_SYNC_MODE=$("$_BRAIN_CONFIG_BIN" get artifacts_sync_mode 2>/dev/null || echo off)

# Detect remote-MCP mode (Path 4 of /setup-gbrain). Local artifacts sync is
# a no-op in remote mode; the brain server pulls from GitHub/GitLab on its
# own cadence. Read claude.json directly to keep this preamble fast (no
# subprocess to claude CLI on every skill start).
_GBRAIN_MCP_MODE="none"
if command -v jq >/dev/null 2>&1 && [ -f "$HOME/.claude.json" ]; then
  _GBRAIN_MCP_TYPE=$(jq -r '.mcpServers.gbrain.type // .mcpServers.gbrain.transport // empty' "$HOME/.claude.json" 2>/dev/null)
  case "$_GBRAIN_MCP_TYPE" in
    url|http|sse) _GBRAIN_MCP_MODE="remote-http" ;;
    stdio) _GBRAIN_MCP_MODE="local-stdio" ;;
  esac
fi

if [ -f "$_BRAIN_REMOTE_FILE" ] && [ ! -d "$_GSTACK_HOME/.git" ] && [ "$_BRAIN_SYNC_MODE" = "off" ]; then
  _BRAIN_NEW_URL=$(head -1 "$_BRAIN_REMOTE_FILE" 2>/dev/null | tr -d '[:space:]')
  if [ -n "$_BRAIN_NEW_URL" ]; then
    echo "ARTIFACTS_SYNC: artifacts repo detected: $_BRAIN_NEW_URL"
    echo "ARTIFACTS_SYNC: run 'gstack-brain-restore' to pull your cross-machine artifacts (or 'gstack-config set artifacts_sync_mode off' to dismiss forever)"
  fi
fi

if [ -d "$_GSTACK_HOME/.git" ] && [ "$_BRAIN_SYNC_MODE" != "off" ]; then
  _BRAIN_LAST_PULL_FILE="$_GSTACK_HOME/.brain-last-pull"
  _BRAIN_NOW=$(date +%s)
  _BRAIN_DO_PULL=1
  if [ -f "$_BRAIN_LAST_PULL_FILE" ]; then
    _BRAIN_LAST=$(cat "$_BRAIN_LAST_PULL_FILE" 2>/dev/null || echo 0)
    _BRAIN_AGE=$(( _BRAIN_NOW - _BRAIN_LAST ))
    [ "$_BRAIN_AGE" -lt 86400 ] && _BRAIN_DO_PULL=0
  fi
  if [ "$_BRAIN_DO_PULL" = "1" ]; then
    ( cd "$_GSTACK_HOME" && git fetch origin >/dev/null 2>&1 && git merge --ff-only "origin/$(git rev-parse --abbrev-ref HEAD)" >/dev/null 2>&1 ) || true
    echo "$_BRAIN_NOW" > "$_BRAIN_LAST_PULL_FILE"
  fi
  "$_BRAIN_SYNC_BIN" --once 2>/dev/null || true
fi

if [ "$_GBRAIN_MCP_MODE" = "remote-http" ]; then
  # Remote-MCP mode: local artifacts sync is a no-op (brain admin's server
  # pulls from GitHub/GitLab). Show the user this is by design, not broken.
  _GBRAIN_HOST=$(jq -r '.mcpServers.gbrain.url // empty' "$HOME/.claude.json" 2>/dev/null | sed -E 's|^https?://([^/:]+).*|\1|')
  echo "ARTIFACTS_SYNC: remote-mode (managed by brain server ${_GBRAIN_HOST:-remote})"
elif [ -d "$_GSTACK_HOME/.git" ] && [ "$_BRAIN_SYNC_MODE" != "off" ]; then
  _BRAIN_QUEUE_DEPTH=0
  [ -f "$_GSTACK_HOME/.brain-queue.jsonl" ] && _BRAIN_QUEUE_DEPTH=$(wc -l < "$_GSTACK_HOME/.brain-queue.jsonl" | tr -d ' ')
  _BRAIN_LAST_PUSH="never"
  [ -f "$_GSTACK_HOME/.brain-last-push" ] && _BRAIN_LAST_PUSH=$(cat "$_GSTACK_HOME/.brain-last-push" 2>/dev/null || echo never)
  echo "ARTIFACTS_SYNC: mode=$_BRAIN_SYNC_MODE | last_push=$_BRAIN_LAST_PUSH | queue=$_BRAIN_QUEUE_DEPTH"
else
  echo "ARTIFACTS_SYNC: off"
fi

Privacy stop-gate: if output shows ARTIFACTS_SYNC: off, artifacts_sync_mode_prompted is false, and gbrain is on PATH or gbrain doctor --fast --json works, ask once:

gstack can publish your artifacts (CEO plans, designs, reports) to a private GitHub repo that GBrain indexes across machines. How much should sync?

Options:

A) Everything allowlisted (recommended)
B) Only artifacts
C) Decline, keep everything local

After answer:

# Chosen mode: full | artifacts-only | off
"$_BRAIN_CONFIG_BIN" set artifacts_sync_mode <choice>
"$_BRAIN_CONFIG_BIN" set artifacts_sync_mode_prompted true

If A/B and ~/.gstack/.git is missing, ask whether to run gstack-artifacts-init. Do not block the skill.

At skill END before telemetry:

"~/.claude/skills/gstack/bin/gstack-brain-sync" --discover-new 2>/dev/null || true
"~/.claude/skills/gstack/bin/gstack-brain-sync" --once 2>/dev/null || true

Model-Specific Behavioral Patch (claude)

The following nudges are tuned for the claude model family. They are subordinate to skill workflow, STOP points, AskUserQuestion gates, plan-mode safety, and /ship review gates. If a nudge below conflicts with skill instructions, the skill wins. Treat these as preferences, not rules.

Todo-list discipline. When working through a multi-step plan, mark each task complete individually as you finish it. Do not batch-complete at the end. If a task turns out to be unnecessary, mark it skipped with a one-line reason.

Think before heavy actions. For complex operations (refactors, migrations, non-trivial new features), briefly state your approach before executing. This lets the user course-correct cheaply instead of mid-flight.

Dedicated tools over Bash. Prefer Read, Edit, Write, Glob, Grep over shell equivalents (cat, sed, find, grep). The dedicated tools are cheaper and clearer.

Voice

Direct, concrete, builder-to-builder. Name the file, function, command, and user-visible impact. No filler.

No em dashes. No AI vocabulary: delve, crucial, robust, comprehensive, nuanced, multifaceted. Never corporate or academic. Short paragraphs. End with what to do.

The user has context you do not. Cross-model agreement is a recommendation, not a decision. The user decides.

Completion Status Protocol

When completing a skill workflow, report status using one of:

DONE — completed with evidence.
DONE_WITH_CONCERNS — completed, but list concerns.
BLOCKED — cannot proceed; state blocker and what was tried.
NEEDS_CONTEXT — missing info; state exactly what is needed.

Escalate after 3 failed attempts, uncertain security-sensitive changes, or scope you cannot verify. Format: STATUS, REASON, ATTEMPTED, RECOMMENDATION.

Operational Self-Improvement

Before completing, if you discovered a durable project quirk or command fix that would save 5+ minutes next time, log it:

~/.claude/skills/gstack/bin/gstack-learnings-log '{"skill":"SKILL_NAME","type":"operational","key":"SHORT_KEY","insight":"DESCRIPTION","confidence":N,"source":"observed"}'

Do not log obvious facts or one-time transient errors.

Telemetry (run last)

After workflow completion, log telemetry. Use skill name: from frontmatter. OUTCOME is success/error/abort/unknown.

PLAN MODE EXCEPTION — ALWAYS RUN: This command writes telemetry to ~/.gstack/analytics/, matching preamble analytics writes.

Run this bash:

_TEL_END=$(date +%s)
_TEL_DUR=$(( _TEL_END - _TEL_START ))
rm -f ~/.gstack/analytics/.pending-"$_SESSION_ID" 2>/dev/null || true
# Session timeline: record skill completion (local-only, never sent anywhere)
~/.claude/skills/gstack/bin/gstack-timeline-log '{"skill":"SKILL_NAME","event":"completed","branch":"'$(git branch --show-current 2>/dev/null || echo unknown)'","outcome":"OUTCOME","duration_s":"'"$_TEL_DUR"'","session":"'"$_SESSION_ID"'"}' 2>/dev/null || true
# Local analytics (gated on telemetry setting)
if [ "$_TEL" != "off" ]; then
echo '{"skill":"SKILL_NAME","duration_s":"'"$_TEL_DUR"'","outcome":"OUTCOME","browse":"USED_BROWSE","session":"'"$_SESSION_ID"'","ts":"'$(date -u +%Y-%m-%dT%H:%M:%SZ)'"}' >> ~/.gstack/analytics/skill-usage.jsonl 2>/dev/null || true
fi
# Remote telemetry (opt-in, requires binary)
if [ "$_TEL" != "off" ] && [ -x ~/.claude/skills/gstack/bin/gstack-telemetry-log ]; then
  ~/.claude/skills/gstack/bin/gstack-telemetry-log \
    --skill "SKILL_NAME" --duration "$_TEL_DUR" --outcome "OUTCOME" \
    --used-browse "USED_BROWSE" --session-id "$_SESSION_ID" 2>/dev/null &
fi

Replace SKILL_NAME, OUTCOME, and USED_BROWSE before running.

Plan Status Footer

Skills that run plan reviews (/plan-*-review, /codex review) include the EXIT PLAN MODE GATE blocking checklist at the end of the skill, which verifies the plan file ends with ## GSTACK REVIEW REPORT before ExitPlanMode is called. Skills that don't run plan reviews (operational skills like /ship, /qa, /review) typically don't operate in plan mode and have no review report to verify; this footer is a no-op for them. Writing the plan file is the one edit allowed in plan mode.

/benchmark-models — Cross-Model Skill Benchmark

You are running the /benchmark-models workflow. Wraps the gstack-model-benchmark binary with an interactive flow that picks a prompt, confirms providers, previews auth, and runs the benchmark.

Different from /benchmark — that skill measures web page performance (Core Web Vitals, load times). This skill measures AI model performance on gstack skills or arbitrary prompts.

Step 0: Locate the binary

BIN="$HOME/.claude/skills/gstack/bin/gstack-model-benchmark"
[ -x "$BIN" ] || BIN=".claude/skills/gstack/bin/gstack-model-benchmark"
[ -x "$BIN" ] || { echo "ERROR: gstack-model-benchmark not found. Run ./setup in the gstack install dir." >&2; exit 1; }
echo "BIN: $BIN"

If not found, stop and tell the user to reinstall gstack.

Step 1: Choose a prompt

Use AskUserQuestion with the preamble format:

Re-ground: current project + branch.
Simplify: "A cross-model benchmark runs the same prompt through 2-3 AI models and shows you how they compare on speed, cost, and output quality. What prompt should we use?"
RECOMMENDATION: A because benchmarking against a real skill exposes tool-use differences, not just raw generation.
Options:
- A) Benchmark one of my gstack skills (we'll pick which skill next). Completeness: 10/10.
- B) Use an inline prompt — type it on the next turn. Completeness: 8/10.
- C) Point at a prompt file on disk — specify path on the next turn. Completeness: 8/10.

If A: list top-level gstack skills that have SKILL.md files (from find . -maxdepth 2 -name SKILL.md -not -path './.*'), ask the user to pick one via a second AskUserQuestion. Use the picked SKILL.md path as the prompt file.

If B: ask the user for the inline prompt. Use it verbatim via --prompt "<text>".

If C: ask for the path. Verify it exists. Use as positional argument.

Step 2: Choose providers

"$BIN" --prompt "unused, dry-run" --models claude,gpt,gemini --dry-run

Show the dry-run output. The "Adapter availability" section tells the user which providers will actually run (OK) vs skip (NOT READY — remediation hint included).

If ALL three show NOT READY: stop with a clear message — benchmark can't run without at least one authed provider. Suggest claude login, codex login, or gemini login / export GOOGLE_API_KEY.

If at least one is OK: AskUserQuestion:

Simplify: "Which models should we include? The dry-run above showed which are authed. Unauthed ones will be skipped cleanly — they won't abort the batch."
RECOMMENDATION: A (all authed providers) because running as many as possible gives the richest comparison.
Options:
- A) All authed providers. Completeness: 10/10.
- B) Only Claude. Completeness: 6/10 (no cross-model signal — use /ship's review for solo claude benchmarks instead).
- C) Pick two — specify on next turn. Completeness: 8/10.

Step 3: Decide on judge

[ -n "$ANTHROPIC_API_KEY" ] || grep -q 'ANTHROPIC' "$HOME/.claude/.credentials.json" 2>/dev/null && echo "JUDGE_AVAILABLE" || echo "JUDGE_UNAVAILABLE"

If judge is available, AskUserQuestion:

Simplify: "The quality judge scores each model's output on a 0-10 scale using Anthropic's Claude as a tiebreaker. Adds ~$0.05/run. Recommended if you care about output quality, not just latency and cost."
RECOMMENDATION: A — the whole point is comparing quality, not just speed.
Options:
- A) Enable judge (adds ~$0.05). Completeness: 10/10.
- B) Skip judge — speed/cost/tokens only. Completeness: 7/10.

If judge is NOT available, skip this question and omit the --judge flag.

Step 4: Run the benchmark

Construct the command from Step 1, 2, 3 decisions:

"$BIN" <prompt-spec> --models <picked-models> [--judge] --output table

Where <prompt-spec> is either --prompt "<text>" (Step 1B), a file path (Step 1A or 1C), and <picked-models> is the comma-separated list from Step 2.

Stream the output as it arrives. This is slow — each provider runs the prompt fully. Expect 30s-5min depending on prompt complexity and whether --judge is on.

Step 5: Interpret results

After the table prints, summarize for the user:

Fastest — provider with lowest latency.
Cheapest — provider with lowest cost.
Highest quality (if --judge ran) — provider with highest score.
Best overall — use judgment. If judge ran: quality-weighted. Otherwise: note the tradeoff the user needs to make.

If any provider hit an error (auth/timeout/rate_limit), call it out with the remediation path.

Step 6: Offer to save results

AskUserQuestion:

Simplify: "Save this benchmark as JSON so you can compare future runs against it?"
RECOMMENDATION: A — skill performance drifts as providers update their models; a saved baseline catches quality regressions.
Options:
- A) Save to ~/.gstack/benchmarks/<date>-<skill-or-prompt-slug>.json. Completeness: 10/10.
- B) Just print, don't save. Completeness: 5/10 (loses trend data).

If A: re-run with --output json and tee to the dated file. Print the path so the user can diff future runs against it.

Important Rules

Never run a real benchmark without Step 2's dry-run first. Users need to see auth status before spending API calls.
Never hardcode model names. Always pass providers from user's Step 2 choice — the binary handles the rest.
Never auto-include --judge. It adds real cost; user must opt in.
If zero providers are authed, STOP. Don't attempt the benchmark — it produces no useful output.
Cost is visible. Every run shows per-provider cost in the table. Users should see it before the next run.

name	benchmark-models
preamble-tier	1
version	1.0.0
description	Cross-model benchmark for gstack skills. (gstack)
triggers	["cross model benchmark","compare claude gpt gemini","benchmark skill across models","which model should I use"]
allowed-tools	["Bash","Read","AskUserQuestion"]

When to invoke this skill

Voice triggers (speech-to-text aliases): "compare models", "model shootout", "which model is best".

Preamble (run first)

_UPD=$(~/.claude/skills/gstack/bin/gstack-update-check 2>/dev/null || .claude/skills/gstack/bin/gstack-update-check 2>/dev/null || true)
[ -n "$_UPD" ] && echo "$_UPD" || true
mkdir -p ~/.gstack/sessions
touch ~/.gstack/sessions/"$PPID"
_SESSIONS=$(find ~/.gstack/sessions -mmin -120 -type f 2>/dev/null | wc -l | tr -d ' ')
find ~/.gstack/sessions -mmin +120 -type f -exec rm {} + 2>/dev/null || true
_PROACTIVE=$(~/.claude/skills/gstack/bin/gstack-config get proactive 2>/dev/null || echo "true")
_PROACTIVE_PROMPTED=$([ -f ~/.gstack/.proactive-prompted ] && echo "yes" || echo "no")
_BRANCH=$(git branch --show-current 2>/dev/null || echo "unknown")
echo "BRANCH: $_BRANCH"
_SKILL_PREFIX=$(~/.claude/skills/gstack/bin/gstack-config get skill_prefix 2>/dev/null || echo "false")
echo "PROACTIVE: $_PROACTIVE"
echo "PROACTIVE_PROMPTED: $_PROACTIVE_PROMPTED"
echo "SKILL_PREFIX: $_SKILL_PREFIX"
source <(~/.claude/skills/gstack/bin/gstack-repo-mode 2>/dev/null) || true
REPO_MODE=${REPO_MODE:-unknown}
echo "REPO_MODE: $REPO_MODE"
_SESSION_KIND=$(~/.claude/skills/gstack/bin/gstack-session-kind 2>/dev/null || echo "interactive")
case "$_SESSION_KIND" in spawned|headless|interactive) ;; *) _SESSION_KIND="interactive" ;; esac
echo "SESSION_KIND: $_SESSION_KIND"
# Conductor host: AskUserQuestion is unreliable here (native disabled, MCP
# variant flaky), so skills render decisions as prose instead of calling the
# tool. Gated on !headless so an eval/CI run INSIDE Conductor (GSTACK_HEADLESS)
# still BLOCKs rather than rendering prose to nobody.
if [ "$_SESSION_KIND" != "headless" ] && { [ -n "${CONDUCTOR_WORKSPACE_PATH:-}" ] || [ -n "${CONDUCTOR_PORT:-}" ]; }; then
  echo "CONDUCTOR_SESSION: true"
fi
_ACTIVATED=$([ -f ~/.gstack/.activated ] && echo "yes" || echo "no")
_FIRST_LOOP_SHOWN=$([ -f ~/.gstack/.first-loop-tip-shown ] && echo "yes" || echo "no")
echo "ACTIVATED: $_ACTIVATED"
echo "FIRST_LOOP_SHOWN: $_FIRST_LOOP_SHOWN"
# First-run project detection: run the detector ONLY on the first-ever skill run
# (ACTIVATED=no, interactive) so it stays off the hot path for every run after.
_FIRST_TASK=""
if [ "$_ACTIVATED" = "no" ] && [ "$_SESSION_KIND" != "headless" ]; then
  _FIRST_TASK=$(~/.claude/skills/gstack/bin/gstack-first-task-detect 2>/dev/null || true)
fi
echo "FIRST_TASK: $_FIRST_TASK"
_LAKE_SEEN=$([ -f ~/.gstack/.completeness-intro-seen ] && echo "yes" || echo "no")
echo "LAKE_INTRO: $_LAKE_SEEN"
_TEL=$(~/.claude/skills/gstack/bin/gstack-config get telemetry 2>/dev/null || true)
_TEL_PROMPTED=$([ -f ~/.gstack/.telemetry-prompted ] && echo "yes" || echo "no")
_TEL_START=$(date +%s)
_SESSION_ID="$$-$(date +%s)"
echo "TELEMETRY: ${_TEL:-off}"
echo "TEL_PROMPTED: $_TEL_PROMPTED"
_EXPLAIN_LEVEL=$(~/.claude/skills/gstack/bin/gstack-config get explain_level 2>/dev/null || echo "default")
if [ "$_EXPLAIN_LEVEL" != "default" ] && [ "$_EXPLAIN_LEVEL" != "terse" ]; then _EXPLAIN_LEVEL="default"; fi
echo "EXPLAIN_LEVEL: $_EXPLAIN_LEVEL"
_QUESTION_TUNING=$(~/.claude/skills/gstack/bin/gstack-config get question_tuning 2>/dev/null || echo "false")
echo "QUESTION_TUNING: $_QUESTION_TUNING"
mkdir -p ~/.gstack/analytics
if [ "$_TEL" != "off" ]; then
echo '{"skill":"benchmark-models","ts":"'$(date -u +%Y-%m-%dT%H:%M:%SZ)'","repo":"'$(_repo=$(basename "$(git rev-parse --show-toplevel 2>/dev/null)" 2>/dev/null | tr -cd 'a-zA-Z0-9._-'); echo "${_repo:-unknown}")'"}'  >> ~/.gstack/analytics/skill-usage.jsonl 2>/dev/null || true
fi
for _PF in $(find ~/.gstack/analytics -maxdepth 1 -name '.pending-*' 2>/dev/null); do
  if [ -f "$_PF" ]; then
    if [ "$_TEL" != "off" ] && [ -x "~/.claude/skills/gstack/bin/gstack-telemetry-log" ]; then
      ~/.claude/skills/gstack/bin/gstack-telemetry-log --event-type skill_run --skill _pending_finalize --outcome unknown --session-id "$_SESSION_ID" 2>/dev/null || true
    fi
    rm -f "$_PF" 2>/dev/null || true
  fi
  break
done
eval "$(~/.claude/skills/gstack/bin/gstack-slug 2>/dev/null)" 2>/dev/null || true
_LEARN_FILE="${GSTACK_HOME:-$HOME/.gstack}/projects/${SLUG:-unknown}/learnings.jsonl"
if [ -f "$_LEARN_FILE" ]; then
  _LEARN_COUNT=$(wc -l < "$_LEARN_FILE" 2>/dev/null | tr -d ' ')
  echo "LEARNINGS: $_LEARN_COUNT entries loaded"
  if [ "$_LEARN_COUNT" -gt 5 ] 2>/dev/null; then
    ~/.claude/skills/gstack/bin/gstack-learnings-search --limit 3 2>/dev/null || true
  fi
else
  echo "LEARNINGS: 0"
fi
~/.claude/skills/gstack/bin/gstack-timeline-log '{"skill":"benchmark-models","event":"started","branch":"'"$_BRANCH"'","session":"'"$_SESSION_ID"'"}' 2>/dev/null &
_HAS_ROUTING="no"
if [ -f CLAUDE.md ] && grep -q "## Skill routing" CLAUDE.md 2>/dev/null; then
  _HAS_ROUTING="yes"
fi
_ROUTING_DECLINED=$(~/.claude/skills/gstack/bin/gstack-config get routing_declined 2>/dev/null || echo "false")
echo "HAS_ROUTING: $_HAS_ROUTING"
echo "ROUTING_DECLINED: $_ROUTING_DECLINED"
_VENDORED="no"
if [ -d ".claude/skills/gstack" ] && [ ! -L ".claude/skills/gstack" ]; then
  if [ -f ".claude/skills/gstack/VERSION" ] || [ -d ".claude/skills/gstack/.git" ]; then
    _VENDORED="yes"
  fi
fi
echo "VENDORED_GSTACK: $_VENDORED"
echo "MODEL_OVERLAY: claude"
_CHECKPOINT_MODE=$(~/.claude/skills/gstack/bin/gstack-config get checkpoint_mode 2>/dev/null || echo "explicit")
_CHECKPOINT_PUSH=$(~/.claude/skills/gstack/bin/gstack-config get checkpoint_push 2>/dev/null || echo "false")
echo "CHECKPOINT_MODE: $_CHECKPOINT_MODE"
echo "CHECKPOINT_PUSH: $_CHECKPOINT_PUSH"
# Plan-mode hint for skills like /spec that branch behavior on plan-mode state.
# Claude Code exposes plan mode via system reminders; we detect best-effort
# from CLAUDE_PLAN_FILE (set by the harness when plan mode is active) and
# fall back to "inactive". Codex hosts and Claude execution mode both end up
# inactive, which is the safe default (defaults to file+execute pipeline).
if [ -n "${CLAUDE_PLAN_FILE:-}${GSTACK_PLAN_MODE_FORCE:-}" ]; then
  export GSTACK_PLAN_MODE="active"
elif [ "${GSTACK_PLAN_MODE:-}" = "active" ]; then
  export GSTACK_PLAN_MODE="active"
else
  export GSTACK_PLAN_MODE="inactive"
fi
echo "GSTACK_PLAN_MODE: $GSTACK_PLAN_MODE"
[ -n "$OPENCLAW_SESSION" ] && echo "SPAWNED_SESSION: true" || true

Plan Mode Safe Operations

In plan mode, allowed because they inform the plan: $B, $D, codex exec/codex review, writes to ~/.gstack/, writes to the plan file, and open for generated artifacts.

Skill Invocation During Plan Mode

If PROACTIVE is "false", do not auto-invoke or proactively suggest skills. If a skill seems useful, ask: "I think /skillname might help here — want me to run it?"

If SKILL_PREFIX is "true", suggest/invoke /gstack-* names. Disk paths stay ~/.claude/skills/gstack/[skill-name]/SKILL.md.

If output shows JUST_UPGRADED <from> <to>: print "Running gstack v{to} (just updated!)". If SPAWNED_SESSION is true, skip feature discovery.

Feature discovery, max one prompt per session:

Missing ~/.claude/skills/gstack/.feature-prompted-continuous-checkpoint: AskUserQuestion for Continuous checkpoint auto-commits. If accepted, run ~/.claude/skills/gstack/bin/gstack-config set checkpoint_mode continuous. Always touch marker.
Missing ~/.claude/skills/gstack/.feature-prompted-model-overlay: inform "Model overlays are active. MODEL_OVERLAY shows the patch." Always touch marker.

After upgrade prompts, continue workflow.

If WRITING_STYLE_PENDING is yes: ask once about writing style:

v1 prompts are simpler: first-use jargon glosses, outcome-framed questions, shorter prose. Keep default or restore terse?

Options:

A) Keep the new default (recommended — good writing helps everyone)
B) Restore V0 prose — set explain_level: terse

If A: leave explain_level unset (defaults to default). If B: run ~/.claude/skills/gstack/bin/gstack-config set explain_level terse.

Always run (regardless of choice):

rm -f ~/.gstack/.writing-style-prompt-pending
touch ~/.gstack/.writing-style-prompted

Skip if WRITING_STYLE_PENDING is no.

open https://garryslist.org/posts/boil-the-ocean
touch ~/.gstack/.completeness-intro-seen

Only run open if yes. Always run touch.

If TEL_PROMPTED is no AND LAKE_INTRO is yes: ask telemetry once via AskUserQuestion:

Help gstack get better. Share usage data only: skill, duration, crashes, stable device ID. No code or file paths. Your repo name is recorded locally only and stripped before any upload.

Options:

A) Help gstack get better! (recommended)
B) No thanks

If A: run ~/.claude/skills/gstack/bin/gstack-config set telemetry community

If B: ask follow-up:

Anonymous mode sends only aggregate usage, no unique ID.

Options:

A) Sure, anonymous is fine
B) No thanks, fully off

If B→A: run ~/.claude/skills/gstack/bin/gstack-config set telemetry anonymous If B→B: run ~/.claude/skills/gstack/bin/gstack-config set telemetry off

Always run:

touch ~/.gstack/.telemetry-prompted

Skip if TEL_PROMPTED is yes.

If PROACTIVE_PROMPTED is no AND TEL_PROMPTED is yes: ask once:

Let gstack proactively suggest skills, like /qa for "does this work?" or /investigate for bugs?

Options:

A) Keep it on (recommended)
B) Turn it off — I'll type /commands myself

If A: run ~/.claude/skills/gstack/bin/gstack-config set proactive true If B: run ~/.claude/skills/gstack/bin/gstack-config set proactive false

Always run:

touch ~/.gstack/.proactive-prompted

Skip if PROACTIVE_PROMPTED is yes.

First-run guidance (one-time)

~/.claude/skills/gstack/bin/gstack-telemetry-log --event-type first_task_scaffold_shown --skill "TASK_TOKEN" --outcome shown 2>/dev/null || true
touch ~/.gstack/.activated 2>/dev/null || true

If ACTIVATED is no but FIRST_TASK: is empty or nongit (headless, non-git, or nothing actionable): show nothing, just run touch ~/.gstack/.activated 2>/dev/null || true.

Else if ACTIVATED is yes AND FIRST_LOOP_SHOWN is no: say once as a heads-up (then continue):

Tip: gstack pays off when you complete one loop — plan → review → ship. A common first loop: /office-hours or /spec to shape it, /plan-eng-review to lock it, then /ship.

Then run touch ~/.gstack/.first-loop-tip-shown 2>/dev/null || true.

Skip this section if ACTIVATED and FIRST_LOOP_SHOWN are both yes.

If HAS_ROUTING is no AND ROUTING_DECLINED is false AND PROACTIVE_PROMPTED is yes: Check if a CLAUDE.md file exists in the project root. If it does not exist, create it.

Use AskUserQuestion:

gstack works best when your project's CLAUDE.md includes skill routing rules.

Options:

A) Add routing rules to CLAUDE.md (recommended)
B) No thanks, I'll invoke skills manually

If A: Append this section to the end of CLAUDE.md:


## Skill routing

When the user's request matches an available skill, invoke it via the Skill tool. When in doubt, invoke the skill.

Key routing rules:
- Product ideas/brainstorming → invoke /office-hours
- Strategy/scope → invoke /plan-ceo-review
- Architecture → invoke /plan-eng-review
- Design system/plan review → invoke /design-consultation or /plan-design-review
- Full review pipeline → invoke /autoplan
- Bugs/errors → invoke /investigate
- QA/testing site behavior → invoke /qa or /qa-only
- Code review/diff check → invoke /review
- Visual polish → invoke /design-review
- Ship/deploy/PR → invoke /ship or /land-and-deploy
- Save progress → invoke /context-save
- Resume context → invoke /context-restore
- Author a backlog-ready spec/issue → invoke /spec

Then commit the change: git add CLAUDE.md && git commit -m "chore: add gstack skill routing rules to CLAUDE.md"

If B: run ~/.claude/skills/gstack/bin/gstack-config set routing_declined true and say they can re-enable with gstack-config set routing_declined false.

This only happens once per project. Skip if HAS_ROUTING is yes or ROUTING_DECLINED is true.

If VENDORED_GSTACK is yes, warn once via AskUserQuestion unless ~/.gstack/.vendoring-warned-$SLUG exists:

This project has gstack vendored in .claude/skills/gstack/. Vendoring is deprecated. Migrate to team mode?

Options:

A) Yes, migrate to team mode now
B) No, I'll handle it myself

If A:

Run git rm -r .claude/skills/gstack/
Run echo '.claude/skills/gstack/' >> .gitignore
Run ~/.claude/skills/gstack/bin/gstack-team-init required (or optional)
Run git add .claude/ .gitignore CLAUDE.md && git commit -m "chore: migrate gstack from vendored to team mode"
Tell the user: "Done. Each developer now runs: cd ~/.claude/skills/gstack && ./setup --team"

If B: say "OK, you're on your own to keep the vendored copy up to date."

Always run (regardless of choice):

eval "$(~/.claude/skills/gstack/bin/gstack-slug 2>/dev/null)" 2>/dev/null || true
touch ~/.gstack/.vendoring-warned-${SLUG:-unknown}

If marker exists, skip.

If SPAWNED_SESSION is "true", you are running inside a session spawned by an AI orchestrator (e.g., OpenClaw). In spawned sessions:

Do NOT use AskUserQuestion for interactive prompts. Auto-choose the recommended option.
Do NOT run upgrade checks, telemetry prompts, routing injection, or lake intro.
Focus on completing the task and reporting results via prose output.
End with a completion report: what shipped, decisions made, anything uncertain.

Artifacts Sync (skill start)

_GSTACK_HOME="${GSTACK_HOME:-$HOME/.gstack}"
# Prefer the v1.27.0.0 artifacts file; fall back to brain file for users
# upgrading mid-stream before the migration script runs.
if [ -f "$HOME/.gstack-artifacts-remote.txt" ]; then
  _BRAIN_REMOTE_FILE="$HOME/.gstack-artifacts-remote.txt"
else
  _BRAIN_REMOTE_FILE="$HOME/.gstack-brain-remote.txt"
fi
_BRAIN_SYNC_BIN="~/.claude/skills/gstack/bin/gstack-brain-sync"
_BRAIN_CONFIG_BIN="~/.claude/skills/gstack/bin/gstack-config"

# /sync-gbrain context-load: teach the agent to use gbrain when it's available.
# Per-worktree pin: post-spike redesign uses kubectl-style `.gbrain-source` in the
# git toplevel to scope queries. Look for the pin in the worktree (not a global
# state file) so that opening worktree B without a pin doesn't claim "indexed"
# just because worktree A was synced. Empty string when gbrain is not
# configured (zero context cost for non-gbrain users).
_GBRAIN_CONFIG="$HOME/.gbrain/config.json"
if [ -f "$_GBRAIN_CONFIG" ] && command -v gbrain >/dev/null 2>&1; then
  _GBRAIN_VERSION_OK=$(gbrain --version 2>/dev/null | grep -c '^gbrain ' || echo 0)
  if [ "$_GBRAIN_VERSION_OK" -gt 0 ] 2>/dev/null; then
    _GBRAIN_PIN_PATH=""
    _REPO_TOP=$(git rev-parse --show-toplevel 2>/dev/null || echo "")
    if [ -n "$_REPO_TOP" ] && [ -f "$_REPO_TOP/.gbrain-source" ]; then
      _GBRAIN_PIN_PATH="$_REPO_TOP/.gbrain-source"
    fi
    if [ -n "$_GBRAIN_PIN_PATH" ]; then
      echo "GBrain configured. Prefer \`gbrain search\`/\`gbrain query\` over Grep for"
      echo "semantic questions; use \`gbrain code-def\`/\`code-refs\`/\`code-callers\` for"
      echo "symbol-aware code lookup. See \"## GBrain Search Guidance\" in CLAUDE.md."
      echo "Run /sync-gbrain to refresh."
    else
      echo "GBrain configured but this worktree isn't pinned yet. Run \`/sync-gbrain --full\`"
      echo "before relying on \`gbrain search\` for code questions in this worktree."
      echo "Falls back to Grep until pinned."
    fi
  fi
fi

_BRAIN_SYNC_MODE=$("$_BRAIN_CONFIG_BIN" get artifacts_sync_mode 2>/dev/null || echo off)

# Detect remote-MCP mode (Path 4 of /setup-gbrain). Local artifacts sync is
# a no-op in remote mode; the brain server pulls from GitHub/GitLab on its
# own cadence. Read claude.json directly to keep this preamble fast (no
# subprocess to claude CLI on every skill start).
_GBRAIN_MCP_MODE="none"
if command -v jq >/dev/null 2>&1 && [ -f "$HOME/.claude.json" ]; then
  _GBRAIN_MCP_TYPE=$(jq -r '.mcpServers.gbrain.type // .mcpServers.gbrain.transport // empty' "$HOME/.claude.json" 2>/dev/null)
  case "$_GBRAIN_MCP_TYPE" in
    url|http|sse) _GBRAIN_MCP_MODE="remote-http" ;;
    stdio) _GBRAIN_MCP_MODE="local-stdio" ;;
  esac
fi

if [ -f "$_BRAIN_REMOTE_FILE" ] && [ ! -d "$_GSTACK_HOME/.git" ] && [ "$_BRAIN_SYNC_MODE" = "off" ]; then
  _BRAIN_NEW_URL=$(head -1 "$_BRAIN_REMOTE_FILE" 2>/dev/null | tr -d '[:space:]')
  if [ -n "$_BRAIN_NEW_URL" ]; then
    echo "ARTIFACTS_SYNC: artifacts repo detected: $_BRAIN_NEW_URL"
    echo "ARTIFACTS_SYNC: run 'gstack-brain-restore' to pull your cross-machine artifacts (or 'gstack-config set artifacts_sync_mode off' to dismiss forever)"
  fi
fi

if [ -d "$_GSTACK_HOME/.git" ] && [ "$_BRAIN_SYNC_MODE" != "off" ]; then
  _BRAIN_LAST_PULL_FILE="$_GSTACK_HOME/.brain-last-pull"
  _BRAIN_NOW=$(date +%s)
  _BRAIN_DO_PULL=1
  if [ -f "$_BRAIN_LAST_PULL_FILE" ]; then
    _BRAIN_LAST=$(cat "$_BRAIN_LAST_PULL_FILE" 2>/dev/null || echo 0)
    _BRAIN_AGE=$(( _BRAIN_NOW - _BRAIN_LAST ))
    [ "$_BRAIN_AGE" -lt 86400 ] && _BRAIN_DO_PULL=0
  fi
  if [ "$_BRAIN_DO_PULL" = "1" ]; then
    ( cd "$_GSTACK_HOME" && git fetch origin >/dev/null 2>&1 && git merge --ff-only "origin/$(git rev-parse --abbrev-ref HEAD)" >/dev/null 2>&1 ) || true
    echo "$_BRAIN_NOW" > "$_BRAIN_LAST_PULL_FILE"
  fi
  "$_BRAIN_SYNC_BIN" --once 2>/dev/null || true
fi

if [ "$_GBRAIN_MCP_MODE" = "remote-http" ]; then
  # Remote-MCP mode: local artifacts sync is a no-op (brain admin's server
  # pulls from GitHub/GitLab). Show the user this is by design, not broken.
  _GBRAIN_HOST=$(jq -r '.mcpServers.gbrain.url // empty' "$HOME/.claude.json" 2>/dev/null | sed -E 's|^https?://([^/:]+).*|\1|')
  echo "ARTIFACTS_SYNC: remote-mode (managed by brain server ${_GBRAIN_HOST:-remote})"
elif [ -d "$_GSTACK_HOME/.git" ] && [ "$_BRAIN_SYNC_MODE" != "off" ]; then
  _BRAIN_QUEUE_DEPTH=0
  [ -f "$_GSTACK_HOME/.brain-queue.jsonl" ] && _BRAIN_QUEUE_DEPTH=$(wc -l < "$_GSTACK_HOME/.brain-queue.jsonl" | tr -d ' ')
  _BRAIN_LAST_PUSH="never"
  [ -f "$_GSTACK_HOME/.brain-last-push" ] && _BRAIN_LAST_PUSH=$(cat "$_GSTACK_HOME/.brain-last-push" 2>/dev/null || echo never)
  echo "ARTIFACTS_SYNC: mode=$_BRAIN_SYNC_MODE | last_push=$_BRAIN_LAST_PUSH | queue=$_BRAIN_QUEUE_DEPTH"
else
  echo "ARTIFACTS_SYNC: off"
fi

Privacy stop-gate: if output shows ARTIFACTS_SYNC: off, artifacts_sync_mode_prompted is false, and gbrain is on PATH or gbrain doctor --fast --json works, ask once:

gstack can publish your artifacts (CEO plans, designs, reports) to a private GitHub repo that GBrain indexes across machines. How much should sync?

Options:

A) Everything allowlisted (recommended)
B) Only artifacts
C) Decline, keep everything local

After answer:

# Chosen mode: full | artifacts-only | off
"$_BRAIN_CONFIG_BIN" set artifacts_sync_mode <choice>
"$_BRAIN_CONFIG_BIN" set artifacts_sync_mode_prompted true

If A/B and ~/.gstack/.git is missing, ask whether to run gstack-artifacts-init. Do not block the skill.

At skill END before telemetry:

"~/.claude/skills/gstack/bin/gstack-brain-sync" --discover-new 2>/dev/null || true
"~/.claude/skills/gstack/bin/gstack-brain-sync" --once 2>/dev/null || true

Model-Specific Behavioral Patch (claude)

Dedicated tools over Bash. Prefer Read, Edit, Write, Glob, Grep over shell equivalents (cat, sed, find, grep). The dedicated tools are cheaper and clearer.

Voice

Direct, concrete, builder-to-builder. Name the file, function, command, and user-visible impact. No filler.

No em dashes. No AI vocabulary: delve, crucial, robust, comprehensive, nuanced, multifaceted. Never corporate or academic. Short paragraphs. End with what to do.

The user has context you do not. Cross-model agreement is a recommendation, not a decision. The user decides.

Completion Status Protocol

When completing a skill workflow, report status using one of:

DONE — completed with evidence.
DONE_WITH_CONCERNS — completed, but list concerns.
BLOCKED — cannot proceed; state blocker and what was tried.
NEEDS_CONTEXT — missing info; state exactly what is needed.

Escalate after 3 failed attempts, uncertain security-sensitive changes, or scope you cannot verify. Format: STATUS, REASON, ATTEMPTED, RECOMMENDATION.

Operational Self-Improvement

Before completing, if you discovered a durable project quirk or command fix that would save 5+ minutes next time, log it:

~/.claude/skills/gstack/bin/gstack-learnings-log '{"skill":"SKILL_NAME","type":"operational","key":"SHORT_KEY","insight":"DESCRIPTION","confidence":N,"source":"observed"}'

Do not log obvious facts or one-time transient errors.

Telemetry (run last)

After workflow completion, log telemetry. Use skill name: from frontmatter. OUTCOME is success/error/abort/unknown.

PLAN MODE EXCEPTION — ALWAYS RUN: This command writes telemetry to ~/.gstack/analytics/, matching preamble analytics writes.

Run this bash:

_TEL_END=$(date +%s)
_TEL_DUR=$(( _TEL_END - _TEL_START ))
rm -f ~/.gstack/analytics/.pending-"$_SESSION_ID" 2>/dev/null || true
# Session timeline: record skill completion (local-only, never sent anywhere)
~/.claude/skills/gstack/bin/gstack-timeline-log '{"skill":"SKILL_NAME","event":"completed","branch":"'$(git branch --show-current 2>/dev/null || echo unknown)'","outcome":"OUTCOME","duration_s":"'"$_TEL_DUR"'","session":"'"$_SESSION_ID"'"}' 2>/dev/null || true
# Local analytics (gated on telemetry setting)
if [ "$_TEL" != "off" ]; then
echo '{"skill":"SKILL_NAME","duration_s":"'"$_TEL_DUR"'","outcome":"OUTCOME","browse":"USED_BROWSE","session":"'"$_SESSION_ID"'","ts":"'$(date -u +%Y-%m-%dT%H:%M:%SZ)'"}' >> ~/.gstack/analytics/skill-usage.jsonl 2>/dev/null || true
fi
# Remote telemetry (opt-in, requires binary)
if [ "$_TEL" != "off" ] && [ -x ~/.claude/skills/gstack/bin/gstack-telemetry-log ]; then
  ~/.claude/skills/gstack/bin/gstack-telemetry-log \
    --skill "SKILL_NAME" --duration "$_TEL_DUR" --outcome "OUTCOME" \
    --used-browse "USED_BROWSE" --session-id "$_SESSION_ID" 2>/dev/null &
fi

Replace SKILL_NAME, OUTCOME, and USED_BROWSE before running.

Plan Status Footer

/benchmark-models — Cross-Model Skill Benchmark

You are running the /benchmark-models workflow. Wraps the gstack-model-benchmark binary with an interactive flow that picks a prompt, confirms providers, previews auth, and runs the benchmark.

Different from /benchmark — that skill measures web page performance (Core Web Vitals, load times). This skill measures AI model performance on gstack skills or arbitrary prompts.

Step 0: Locate the binary

BIN="$HOME/.claude/skills/gstack/bin/gstack-model-benchmark"
[ -x "$BIN" ] || BIN=".claude/skills/gstack/bin/gstack-model-benchmark"
[ -x "$BIN" ] || { echo "ERROR: gstack-model-benchmark not found. Run ./setup in the gstack install dir." >&2; exit 1; }
echo "BIN: $BIN"

If not found, stop and tell the user to reinstall gstack.

Step 1: Choose a prompt

Use AskUserQuestion with the preamble format:

Re-ground: current project + branch.
Simplify: "A cross-model benchmark runs the same prompt through 2-3 AI models and shows you how they compare on speed, cost, and output quality. What prompt should we use?"
RECOMMENDATION: A because benchmarking against a real skill exposes tool-use differences, not just raw generation.
Options:
- A) Benchmark one of my gstack skills (we'll pick which skill next). Completeness: 10/10.
- B) Use an inline prompt — type it on the next turn. Completeness: 8/10.
- C) Point at a prompt file on disk — specify path on the next turn. Completeness: 8/10.

If B: ask the user for the inline prompt. Use it verbatim via --prompt "<text>".

If C: ask for the path. Verify it exists. Use as positional argument.

Step 2: Choose providers

"$BIN" --prompt "unused, dry-run" --models claude,gpt,gemini --dry-run

Show the dry-run output. The "Adapter availability" section tells the user which providers will actually run (OK) vs skip (NOT READY — remediation hint included).

If at least one is OK: AskUserQuestion:

Simplify: "Which models should we include? The dry-run above showed which are authed. Unauthed ones will be skipped cleanly — they won't abort the batch."
RECOMMENDATION: A (all authed providers) because running as many as possible gives the richest comparison.
Options:
- A) All authed providers. Completeness: 10/10.
- B) Only Claude. Completeness: 6/10 (no cross-model signal — use /ship's review for solo claude benchmarks instead).
- C) Pick two — specify on next turn. Completeness: 8/10.

Step 3: Decide on judge

[ -n "$ANTHROPIC_API_KEY" ] || grep -q 'ANTHROPIC' "$HOME/.claude/.credentials.json" 2>/dev/null && echo "JUDGE_AVAILABLE" || echo "JUDGE_UNAVAILABLE"

If judge is available, AskUserQuestion:

Simplify: "The quality judge scores each model's output on a 0-10 scale using Anthropic's Claude as a tiebreaker. Adds ~$0.05/run. Recommended if you care about output quality, not just latency and cost."
RECOMMENDATION: A — the whole point is comparing quality, not just speed.
Options:
- A) Enable judge (adds ~$0.05). Completeness: 10/10.
- B) Skip judge — speed/cost/tokens only. Completeness: 7/10.

If judge is NOT available, skip this question and omit the --judge flag.

Step 4: Run the benchmark

Construct the command from Step 1, 2, 3 decisions:

"$BIN" <prompt-spec> --models <picked-models> [--judge] --output table

Where <prompt-spec> is either --prompt "<text>" (Step 1B), a file path (Step 1A or 1C), and <picked-models> is the comma-separated list from Step 2.

Stream the output as it arrives. This is slow — each provider runs the prompt fully. Expect 30s-5min depending on prompt complexity and whether --judge is on.

Step 5: Interpret results

After the table prints, summarize for the user:

Fastest — provider with lowest latency.
Cheapest — provider with lowest cost.
Highest quality (if --judge ran) — provider with highest score.
Best overall — use judgment. If judge ran: quality-weighted. Otherwise: note the tradeoff the user needs to make.

If any provider hit an error (auth/timeout/rate_limit), call it out with the remediation path.

Step 6: Offer to save results

AskUserQuestion:

Simplify: "Save this benchmark as JSON so you can compare future runs against it?"
RECOMMENDATION: A — skill performance drifts as providers update their models; a saved baseline catches quality regressions.
Options:
- A) Save to ~/.gstack/benchmarks/<date>-<skill-or-prompt-slug>.json. Completeness: 10/10.
- B) Just print, don't save. Completeness: 5/10 (loses trend data).

If A: re-run with --output json and tee to the dated file. Print the path so the user can diff future runs against it.

Important Rules

Never run a real benchmark without Step 2's dry-run first. Users need to see auth status before spending API calls.
Never hardcode model names. Always pass providers from user's Step 2 choice — the binary handles the rest.
Never auto-include --judge. It adds real cost; user must opt in.
If zero providers are authed, STOP. Don't attempt the benchmark — it produces no useful output.
Cost is visible. Every run shows per-provider cost in the table. Users should see it before the next run.