usbtest

name

usbtest

description

Use when running, debugging, or porting the Linux usbtest/testusb battery (examples/device/usbtest, cafe:4010) — device "did not bind", SET_CONFIGURATION fails, a case fails with errno 110/32/5/71, toggle-clear/halt/unlink/iso failures, iso packets dropped, or a new MCU/DCD needs the full 30/30 sign-off. Needs a Linux PC as the link's host driving TinyUSB in device role — it exercises the DCD, not the TinyUSB host stack.

usbtest — porting & debugging the Linux kernel USB battery

Overview

examples/device/usbtest is the device-side peer of the Linux kernel's usbtest.ko/testusb (gadget-zero source/sink protocol): 30 cases over bulk, EP0, interrupt, and isochronous, including halt, data-toggle, and unlink storms. It is the most adversarial exerciser a DCD gets — every port so far surfaced at least one real driver bug. Host runner: test/hil/usbtest.py; HIL integration runs it per board and reports ✅ 30/30 cells.

Core principle: the battery is a DCD test, not a firmware test. When a case fails, suspect the DCD path it exercises (table below), reproduce that one case, and root-cause on hardware before changing anything (superpowers:systematic-debugging). One variable at a time; a fix is proven by the failing case passing and the full battery still at 30/30 across reflash cycles.

Run

# build (cmake); descriptor sizes auto-adapt per MCU via src/usb_descriptors.h + src/tusb_config.h
cd examples/device/usbtest && cmake -B build -DBOARD=<board> -G Ninja -DCMAKE_BUILD_TYPE=MinSizeRel && cmake --build build
# flash, wait ~3-5 s for enumeration to settle, then:
python3 test/hil/usbtest.py --serial <uid> --keep-binding            # full battery for the advertised tier
python3 test/hil/usbtest.py --serial <uid> --keep-binding --tests 29 # one case

• Always --keep-binding: the cleanup unbind path has wedged host xHCIs (usb_hcd_alloc_bandwidth).
• CI (hil_test.py) additionally passes --budget, --outer-timeout and --recover-board/--recover-fw: on a HUNG case the battery aborts, RESETS the DUT through its roster probe (non-destructive, ~130 ms) and reflashes only if that does not clear the wedge (see usb-kernel-recover). Manual runs without those flags leave a HUNG device wedged and skip cleanup — expected; reset or reflash it yourself.
• Always settle a few seconds after flashing — enumeration can bounce once; testusb into the gap sees the device drop mid-case.
• On a CI rig: stop the actions runner before touching hardware; restart after. Never run two batteries concurrently (hil_test.py serializes them; concurrent batteries have hard-frozen a rig via a fatal PCIe error on a VFIO-passed xHCI).

Porting ladder — new MCU/DCD to 30/30

1. Tier 1 (bulk): set USBTEST_TIER 1, get enumeration + cases 0,9,10 (EP0) + 1–8,17–20,27,28 solid. EP0 correctness first — everything else reports through it.
2. Tier 2 (ctrl_out 14/21), tier 3 (interrupt 25/26), tier 4 (iso 15/16/22/23) — raise the tier only when the layer below is clean; run the full battery after each layer.
3. Fit the endpoints: tier 4 needs 6 endpoints + EP0. Small parts need per-MCU mps/epbuf overrides in src/usb_descriptors.h (USBTEST_INT/ISO_EP_MPS_FS) and src/tusb_config.h (CFG_TUD_VENDOR_TX_EPSIZE) — follow the existing CH32/LPC11 patterns. Parts that can't fit go in skip.txt.
4. Sign-off = reliability, not one pass: 3–10 full flash→battery cycles. One 30/30 proves nothing on a flaky bring-up; deterministic partial counts (e.g. exactly 1-in-8 lost) are a signature, not noise — chase them.
5. Register the board in test/hil/tinyusb.json so the HIL suite runs it.

Case → DCD subsystem map

Failing case(s)	Exercises	First suspect
9, 10	EP0 control storms	EP0 state machine, ZLP/status stage, control starvation under load
1–8, 17–20, 27, 28	bulk source/sink, sg, perf	FIFO handling, multi-packet, ZLP tolerance
11, 12, 24	URB unlink mid-transfer	abort/close paths leaving state half-armed
13	set/clear halt	stall must kill the transfer; halt on armed IN must flush the TX FIFO
29	clear-halt on an armed, un-halted ep	the classic: dcd_edpt_clear_stall resets toggle but disarms the queued receive → NAKs forever, errno 110. Fix: reset toggle to DATA0 and re-arm/preserve the pending transfer. Found independently on rp2040, fsdev, ch32_usbhs, rusb2
14, 21	vendor EP0 write/readback	multi-packet control-OUT chunking, DCP flow control
25, 26	interrupt src/sink	usually free once bulk works
15, 16, 22, 23	isochronous	see iso rules below

Iso rules (most-violated contract)

• DATA0-only in BOTH directions at FS — never run bulk-style toggle logic on an iso endpoint (manual-toggle parts: skip the ISR toggle flip for iso IN and the toggle-mismatch drop for iso OUT). Symptom of violating it: exactly every-other packet lost.
• No handshake — iso never NAKs/STALLs; parts with response fields use their "no response" encoding (e.g. NYET on WCH).
• dcd_edpt_iso_alloc/iso_activate must not be stubs returning false — usbd fails the interface open and the kernel logs "did not bind"/SET_CONFIG times out. If a DCD refuses iso "because the hardware can't", verify against the datasheet — the manual outranks the code comment (two "no iso support" claims in this tree were false, incl. a per-endpoint exception the RM documents for one endpoint number only).
• A multi-packet iso IN submit is legal: the DCD streams it one packet per frame, refilling in the ISR. Slow cores may need double-buffered iso to make the frame deadline.

Debug ladder (escalate in order)

errno	Meaning
110	timeout — endpoint NAKing forever / device wedged
32	EPIPE — unexpected STALL
5	EIO — iso packet errors (check dmesg: "N errors out of M")
71	EPROTO — device answered wrong / too slow (after HC retries)

Step 0 — read what the case actually does. The kernel module is ground truth; the table above is a summary. Do this before theorising, and always before deciding whether a hung case is recoverable. Fetch the rig's exact version (uname -r):

curl -sO "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/plain/drivers/usb/misc/usbtest.c?h=v6.12.96"
# case N lives under `case N:` in usbtest_do_ioctl(); tools/usb/testusb.c maps the flags:
# -c = param.iterations, -s = param.length, -g = param.sglen  (NOT what they read like)

• Real traffic and pass criteria. Case 24 at -c 256 -s 1024 -g 8 is 256 rounds of 8 bulk-OUT URBs, unlinking urbs[num-4]/urbs[num-2] and requiring -ECONNRESET on those two plus normal completion on the other 6 — not the "256 URBs" the flags suggest.
• Whether the wait is bounded — decisive for recovery. simple_io uses wait_for_completion_timeout (:481); the unlink paths use a bare wait_for_completion (:1502, :1615). A device stalling there wedges the ioctl in D state permanently — it holds the device lock, so nothing recovers it (usb-kernel-recover, "The terminal case"). Knowing this first stops you burning the rig on attempts that cannot work.
• Which DCD path is implicated, precisely rather than by category.

1. usbtest.py per-case output + its captured dmesg (TEST n markers bracket each case).
2. usbmon (usbmon skill): URB-level ground truth. It cannot show data toggles or NAKs — a toggle desync and a dead endpoint look identical (Submits without Completes); distinguish device-side with GDB.
3. On-device gdb/openocd: read the EP control registers and DCD structs at the hang.
4. Heisenbugs (vanish under logging): RAM ring-buffer trace dumped over openocd; for silent lockups JLink PC-sampling (halt+regs repeatedly — a pinned PC names the spin).
5. Cross-check the reference manual (read-doc skill) before changing any register-level code — per CLAUDE.md, and because comments/assumptions in DCDs have been wrong about hardware caps.
6. Check the vendor's silicon errata early for timing/DMA hangs (an unimplemented erratum workaround caused a case-10 hang on one port).

Traps that pass gcc/desk review but fail elsewhere

• TUD_OPT_HIGH_SPEED is a compile-time capability, not the live speed: the FS config descriptor (and OTHER_SPEED) must use FS-legal sizes (int ≤ 64, iso IN+OUT ≤ 1023 B/frame) even on HS builds — use separate _FS/_HS descriptor macros.
• Unused static inline helpers: clang -Wunused-function and IAR Pe177 error where gcc stays quiet → TU_ATTR_UNUSED.
• A symbol referenced only inside naked asm is invisible to LTO and gets dropped in -flto make builds → keep a TU_ATTR_USED C reference to it.
• Nested USB IRQs on cores with hardware context stacks (QingKe HWSTK): plain __attribute__((interrupt)) corrupts the return — use naked handlers relying on the HW stack.
• Dedicated USB RAM budgets (PMA/USB-RAM) differ per part and per build system section placement: check the link map, not just that it builds.

Red flags — stop and re-examine

• "One pass = done" → run reflash cycles.
• "The DCD comment says the hardware can't" → open the datasheet.
• "usbmon shows no toggle problem" → usbmon can't see toggles.
• "It works on gcc" → clang/IAR/LTO/make still pending.
• "Fixed iso IN" → apply the same exemption to iso OUT (toggle logic is symmetric).
• A clean single-board run does not validate concurrent/fleet behavior — batteries serialize.
• Reasoning about a case from its name or table row → open usbtest.c (step 0). The flags don't mean what they look like, and recoverability is a property of that case's wait, not of the rig.