player-controller

name	player-controller
description	Use when implementing player movement — CharacterBody2D/3D patterns, input handling, physics, common movement recipes

Player Controllers in Godot 4.3+

All examples target Godot 4.3+ with no deprecated APIs. GDScript is shown first, then C#.

Related skills: physics-system for RigidBody, Area, raycasting, and collision shapes, 2d-essentials for TileMaps, parallax, and 2D lighting, 3d-essentials for CharacterBody3D and 3D movement setup, state-machine for movement state management, camera-system for camera follow and shake, component-system for hitbox/hurtbox integration, animation-system for animation driven by movement state, input-handling for InputMap actions and controller support, ai-navigation for enemy movement and pathfinding.

---

1. Core Concepts

CharacterBody vs RigidBody

Body Type	Use For	Physics Control	Notes
CharacterBody2D/3D	Player, enemies, NPCs	Manual (full)	You control velocity; move_and_slide() handles collisions
RigidBody2D/3D	Projectiles, props, debris	Engine-driven	Physics engine applies forces; harder to control precisely
RigidBody2D/3D	Projectiles with bouncing	Engine-driven	Set linear_velocity once; let physics resolve bounces
CharacterBody2D	Platformers, top-down, FPS	Manual (full)	Reliable and predictable; best for responsive game feel

Rule of thumb: Use CharacterBody when you need tight, responsive control. Use RigidBody when you want realistic physics simulation.

The Movement Loop

Every physics frame follows this order:

1. Read input          → get axis/action values
2. Apply forces        → gravity, friction, acceleration
3. Modify velocity     → move_toward, lerp, clamp
4. move_and_slide()    → engine resolves collisions, updates position
5. Post-movement state → check is_on_floor(), is_on_wall(), landing events

Always put this loop in _physics_process(delta), never _process(delta).

---

2. 2D Top-Down Controller

GDScript

extends CharacterBody2D

@export var speed: float = 200.0
@export var acceleration: float = 1500.0
@export var friction: float = 1200.0

func _physics_process(delta: float) -> void:
    # 1. Read input (normalized 4-directional vector)
    var input_dir: Vector2 = Input.get_vector("ui_left", "ui_right", "ui_up", "ui_down")

    # 2 & 3. Apply acceleration or friction to velocity
    if input_dir != Vector2.ZERO:
        velocity = velocity.move_toward(input_dir * speed, acceleration * delta)
    else:
        velocity = velocity.move_toward(Vector2.ZERO, friction * delta)

    # 4. Move and resolve collisions
    move_and_slide()

C#

using Godot;

public partial class TopDownPlayer : CharacterBody2D
{
    [Export] public float Speed { get; set; } = 200.0f;
    [Export] public float Acceleration { get; set; } = 1500.0f;
    [Export] public float Friction { get; set; } = 1200.0f;

    public override void _PhysicsProcess(double delta)
    {
        // 1. Read input (normalized 4-directional vector)
        Vector2 inputDir = Input.GetVector("ui_left", "ui_right", "ui_up", "ui_down");

        // 2 & 3. Apply acceleration or friction
        if (inputDir != Vector2.Zero)
            Velocity = Velocity.MoveToward(inputDir * Speed, Acceleration * (float)delta);
        else
            Velocity = Velocity.MoveToward(Vector2.Zero, Friction * (float)delta);

        // 4. Move and resolve collisions
        MoveAndSlide();
    }
}

---

3. 2D Platformer Controller

GDScript

extends CharacterBody2D

@export var speed: float = 200.0
@export var jump_velocity: float = -400.0
@export var acceleration: float = 1200.0
@export var deceleration: float = 900.0

# Coyote time and jump buffer
@export var coyote_time: float = 0.12
@export var jump_buffer_time: float = 0.12

var _gravity: float = ProjectSettings.get_setting("physics/2d/default_gravity")
var _coyote_timer: float = 0.0
var _jump_buffer_timer: float = 0.0
var _was_on_floor: bool = false

func _physics_process(delta: float) -> void:
    # Coyote time: allow jump briefly after walking off a ledge
    if is_on_floor():
        _coyote_timer = coyote_time
        _was_on_floor = true
    else:
        _coyote_timer -= delta

    # Jump buffer: register jump input before landing
    if Input.is_action_just_pressed("ui_accept"):
        _jump_buffer_timer = jump_buffer_time
    else:
        _jump_buffer_timer -= delta

    # Apply gravity when airborne
    if not is_on_floor():
        velocity.y += _gravity * delta

    # Jump: consume coyote time and buffer together
    var can_jump: bool = _coyote_timer > 0.0
    if _jump_buffer_timer > 0.0 and can_jump:
        velocity.y = jump_velocity
        _coyote_timer = 0.0
        _jump_buffer_timer = 0.0

    # Variable jump height: cut velocity when button released early
    if Input.is_action_just_released("ui_accept") and velocity.y < 0.0:
        velocity.y *= 0.5

    # Horizontal movement with deceleration
    var input_x: float = Input.get_axis("ui_left", "ui_right")
    if input_x != 0.0:
        velocity.x = move_toward(velocity.x, input_x * speed, acceleration * delta)
    else:
        velocity.x = move_toward(velocity.x, 0.0, deceleration * delta)

    move_and_slide()

C#

using Godot;

public partial class PlatformerPlayer : CharacterBody2D
{
    [Export] public float Speed { get; set; } = 200.0f;
    [Export] public float JumpVelocity { get; set; } = -400.0f;
    [Export] public float Acceleration { get; set; } = 1200.0f;
    [Export] public float Deceleration { get; set; } = 900.0f;
    [Export] public float CoyoteTime { get; set; } = 0.12f;
    [Export] public float JumpBufferTime { get; set; } = 0.12f;

    private float _gravity = ProjectSettings.GetSetting("physics/2d/default_gravity").AsSingle();
    private float _coyoteTimer;
    private float _jumpBufferTimer;

    public override void _PhysicsProcess(double delta)
    {
         dt = ()delta;

        
         (IsOnFloor())
            _coyoteTimer = CoyoteTime;
        
            _coyoteTimer -= dt;

        
         (Input.IsActionJustPressed())
            _jumpBufferTimer = JumpBufferTime;
        
            _jumpBufferTimer -= dt;

        
         (!IsOnFloor())
        {
            Vector2 vel = Velocity;
            vel.Y += _gravity * dt;
            Velocity = vel;
        }

        
         (_jumpBufferTimer >  && _coyoteTimer > )
        {
            Vector2 vel = Velocity;
            vel.Y = JumpVelocity;
            Velocity = vel;
            _coyoteTimer = ;
            _jumpBufferTimer = ;
        }

        
         (Input.IsActionJustReleased() && Velocity.Y < )
        {
            Vector2 vel = Velocity;
            vel.Y *= ;
            Velocity = vel;
        }

        
         inputX = Input.GetAxis(, );
        Vector2 velocity = Velocity;
         (inputX != )
            velocity.X = Mathf.MoveToward(velocity.X, inputX * Speed, Acceleration * dt);
        
            velocity.X = Mathf.MoveToward(velocity.X, , Deceleration * dt);

        Velocity = velocity;
        MoveAndSlide();
    }
}

---

4. 3D First-Person Controller

GDScript

extends CharacterBody3D

@export var move_speed: float = 5.0
@export var jump_velocity: float = 5.0
@export var mouse_sensitivity: float = 0.002

@onready var head: Node3D = $Head  # Child Node3D that holds Camera3D

var _gravity: float = ProjectSettings.get_setting("physics/3d/default_gravity")

func _ready() -> void:
    Input.mouse_mode = Input.MOUSE_MODE_CAPTURED

func _unhandled_input(event: InputEvent) -> void:
    if event is InputEventMouseMotion and Input.mouse_mode == Input.MOUSE_MODE_CAPTURED:
        # Horizontal look: rotate the body (yaw)
        rotate_y(-event.relative.x * mouse_sensitivity)
        # Vertical look: rotate the head (pitch), clamped to ±90°
        head.rotate_x(-event.relative.y * mouse_sensitivity)
        head.rotation.x = clamp(head.rotation.x, -PI / 2.0, PI / 2.0)

    if event.is_action_pressed("ui_cancel"):
        Input.mouse_mode = Input.MOUSE_MODE_VISIBLE

func _physics_process(delta: float) -> void:
    # Gravity
    if not is_on_floor():
        velocity.y -= _gravity * delta

    # Jump
    if Input.is_action_just_pressed("ui_accept") and is_on_floor():
        velocity.y = jump_velocity

    # Movement relative to the direction the player is facing
    var input_dir: Vector2 = Input.get_vector("ui_left", "ui_right", "ui_up", "ui_down")
    var direction: Vector3 = (transform.basis * Vector3(input_dir.x, 0, input_dir.y)).normalized()

    if direction != Vector3.ZERO:
        velocity.x = direction.x * move_speed
        velocity.z = direction.z * move_speed
    else:
        velocity.x = move_toward(velocity.x, 0.0, move_speed)
        velocity.z = move_toward(velocity.z, 0.0, move_speed)

    move_and_slide()

C#

using Godot;

public partial class FPSController : CharacterBody3D
{
    [Export] public float MoveSpeed { get; set; } = 5.0f;
    [Export] public float JumpVelocity { get; set; } = 5.0f;
    [Export] public float MouseSensitivity { get; set; } = 0.002f;

    private float _gravity = ProjectSettings.GetSetting("physics/3d/default_gravity").AsSingle();
    private Node3D _head;

    public override void _Ready()
    {
        _head = GetNode<Node3D>("Head");
        Input.MouseMode = Input.MouseModeEnum.Captured;
    }

    public override void _UnhandledInput(InputEvent @event)
    {
        if (@event is InputEventMouseMotion motion
            && Input.MouseMode == Input.MouseModeEnum.Captured)
        {
            // Horizontal look (yaw on body)
            RotateY(-motion.Relative.X * MouseSensitivity);
            // Vertical look (pitch on head), clamped to ±90°
            _head.RotateX(-motion.Relative.Y * MouseSensitivity);
            Vector3 rot = _head.Rotation;
            rot.X = Mathf.Clamp(rot.X, -Mathf.Pi / 2f, Mathf.Pi / 2f);
            _head.Rotation = rot;
        }

        if (@event.IsActionPressed("ui_cancel"))
            Input.MouseMode = Input.MouseModeEnum.Visible;
    }

       _PhysicsProcess( delta)
    {
         dt = ()delta;
        Vector3 vel = Velocity;

        
         (!IsOnFloor())
            vel.Y -= _gravity * dt;

        
         (Input.IsActionJustPressed() && IsOnFloor())
            vel.Y = JumpVelocity;

        
        Vector2 inputDir = Input.GetVector(, , , );
        Vector3 direction = (Transform.Basis *  Vector3(inputDir.X, , inputDir.Y)).Normalized();

         (direction != Vector3.Zero)
        {
            vel.X = direction.X * MoveSpeed;
            vel.Z = direction.Z * MoveSpeed;
        }
        
        {
            vel.X = Mathf.MoveToward(vel.X, , MoveSpeed);
            vel.Z = Mathf.MoveToward(vel.Z, , MoveSpeed);
        }

        Velocity = vel;
        MoveAndSlide();
    }
}

---

5. Common Movement Recipes

Beyond the basic locomotion patterns above, two recipes come up so often that they deserve their own block: Dash (timer-based velocity override for a short burst) and Wall Jump (vertical wall slide + bounce off GetWallNormal() when jump is pressed). Both apply to a CharacterBody2D and slot into the standard _physics_process loop alongside gravity and horizontal movement.

See references/common-movement-recipes.md for full GDScript and C# implementations of both recipes.

---

6. Common Pitfalls

Symptom	Cause	Fix
Player sticks to walls	Default wall blocking behavior	Set floor_block_on_wall = false on the CharacterBody
Jittery or frame-rate-dependent movement	Movement in _process	Move all physics/velocity code to _physics_process(delta)
Inconsistent jump height	Fixed velocity ignores frame timing	Use variable jump (cut velocity.y on button release)
Player slides down slopes	No snap or angle limits	Set floor_snap_length > 0 and tune floor_max_angle
Mouse look inverted	Wrong sign on rotation delta	Negate event.relative.x for yaw and/or event.relative.y for pitch

---

7. Implementation Checklist

• All movement logic is inside _physics_process(delta), not _process
• Input action names match exactly what is defined in Project > Project Settings > Input Map
• Gravity value is read from ProjectSettings (physics/2d/default_gravity or physics/3d/default_gravity), not hard-coded
• move_and_slide() is called after all velocity modifications each frame
• Platformers implement coyote time and jump buffering for responsive feel
• FPS controllers capture mouse in _ready() and release on escape
• Variable jump height is handled via early-release velocity reduction