drilling

name	drilling
description	Use when working with well drilling operations, real-time drilling monitoring, kick detection, stuck pipe analysis, or drilling parameter optimization

Skill: Drilling Pipeline

Guide AI agents through well drilling operations and monitoring.

Purpose

Support drilling engineers in well planning, real-time monitoring, and post-well analysis.

Roles

• Drilling Engineer - Well design, casing program, drilling parameters
• Mud Engineer - Drilling fluids, hydraulics, wellbore stability
• Well Planner - Trajectory design, anti-collision, target intercept
• Rig Supervisor - Real-time operations, safety, equipment

Data Types

Data	Source	Frequency
WOB, RPM, Torque	MWD/Surface	Real-time (1 Hz)
Mud weight, viscosity	Mud logging	Periodic
Flow rate, pit volume	Surface sensors	Real-time (1 Hz)
Gamma ray, resistivity	LWD	Real-time
Pressure	PWD (Pressure While Drilling)	Real-time
Trajectory	MWD	Every stand (~30 m)

Workflow

Phase 1: Well Planning

1. Define targets (from exploration)
2. Design trajectory (3D wellpath)
3. Design casing program (depths, sizes, grades)
4. Select drilling fluids
5. Identify hazards (pore pressure, fracture gradient, H2S)
6. Optimize drilling parameters (ROP, hydraulics)

Phase 2: Real-Time Drilling

1. Monitor drilling parameters
   • Weight on Bit (WOB)
   • RPM (Rotations Per Minute)
   • Torque
   • Rate of Penetration (ROP)
2. Monitor mud returns
   • Flow rate
   • Mud weight
   • Cuttings analysis
3. Monitor LWD data
   • Gamma ray
   • Resistivity
   • Pressure
4. Detect anomalies
   • Kicks (influx of formation fluid)
   • Losses (mud lost to formation)
   • Stuck pipe indicators

Phase 3: Post-Well Analysis

1. Compare actual vs. planned
2. Document lessons learned
3. Update drilling database
4. Optimize future wells

Key Parameters

Parameter	Typical Range	Alert Threshold
WOB	10-80 klbs	>120% of planned
Torque	5-50 kft-lbs	>110% of planned
RPM	60-180 rpm	Varies
ROP	50-500 ft/hr	Depends on formation
Mud weight	8-20 ppg	>0.5 ppg change
Flow in/out	200-1000 gpm	Not equal = alert

Safety Focus

Kick Detection

Signs of kick (well control situation):

• Mud volume increase (pit gain)
• Flow rate differential (flow in ≠ flow out)
• Mud weight decrease
• Drilling break (sudden ROP increase)

Response: STOP, shut-in, record pressures, kill well

Stuck Pipe Indicators

• Excessive torque/drag
• No circulation
• Can't move pipe

Lost Circulation

• Sudden mud loss
• No returns at surface
• Loss > 50 bbl/hr

Domain Tasks

These tasks are handled by this skill:

• Optimize drilling parameters
• Interpret LWD data
• Calculate hydraulics
• Analyze drilling performance

Software Tasks

These tasks invoke petropowers:oil-gas-delegation:

• Real-time drilling monitoring dashboard
• Rig telemetry database
• Automated drilling reports
• Well planning software integration

Real-Time Monitoring Example

import pandas as pd
import numpy as np

# Simulated real-time data
data = pd.DataFrame({
    'timestamp': pd.date_range('2024-01-01', periods=100, freq='1s'),
    'wob_klbs': np.random.normal(40, 5, 100),
    'torque_kftlbs': np.random.normal(25, 3, 100),
    'rpm': np.random.normal(120, 10, 100),
    'rop_fthr': np.random.normal(150, 30, 100),
    'flow_in_gpm': np.random.normal(800, 20, 100),
    'flow_out_gpm': np.random.normal(800, 20,  100),
})

# Kick detection
def check_for_kick(df):
    alerts = []
    
    # Pit gain (flow out > flow in)
    flow_diff = df['flow_out_gpm'] - df['flow_in_gpm']
    if (flow_diff > 50).any():
        alerts.append('POTENTIAL KICK: Flow out >> Flow in')
    
    # Drilling break
    if df['rop_fthr'].max() > 2 * df['rop_fthr'].median():
        alerts.append()
    
     alerts

alerts = check_for_kick(data)
 alert  alerts:
    ()

Hydraulics Calculation

import math

def calculate_annular_velocity(flow_rate_gpm, hole_diameter_in, pipe_diameter_in):
    """Calculate annular velocity in ft/min"""
    # Annular area (in²)
    annular_area = math.pi/4 * (hole_diameter_in**2 - pipe_diameter_in**2)
    
    # Convert to ft/min
    av = (flow_rate_gpm * 144) / annular_area  # ft/min
    
    return av

# Example: 12.25" hole, 5" drill pipe
av = calculate_annular_velocity(800, 12.25, 5)
print(f"Annular velocity: {av:.1f} ft/min")

Quality Checklist

Drilling operations checklist:

• Well control equipment tested
• Blowout preventer (BOP) function tested
• Pit volume monitored
• Flow sensors calibrated
• LWD tools functional
• Emergency procedures reviewed

References

• SPE Drilling & Completion
• API SPEC 5CT (Casing and Tubing)
• IADC Drilling Manual
• Well Control: MIT (Managed Pressure Drilling)