| name | simulink-streaming-dsp |
| description | Building or editing Simulink (.slx) models that stream signals in frames using DSP System Toolbox — audio, vibration, radar, comms. Use when the prompt names a Simulink block (Discrete FIR Filter, Buffer, Unbuffer, Rate Transition, Downsample, Upsample, Sample-Rate Converter, FIR Decimation, Time Scope, Spectrum Analyzer, From Multimedia File) or an action (frame-based processing, InputProcessing, buffering, overlap, windowing, STFT, short-time Fourier, decimate, downsample, upsample, resample, multirate, anti-aliasing, tunable filter). Prevents silent numerical errors from sample-vs-frame mismatch, wrong block choice, or missing anti-aliasing.
|
| license | https://www.mathworks.com/content/dam/mathworks/license/pmrl/license.md |
| metadata | {"author":"MathWorks","version":"2.0"} |
Simulink Streaming DSP
Build streaming (frame-based) signal processing models in Simulink using
DSP System Toolbox. This skill prevents silent errors from wrong block
selection, missed parameter settings, and outdated filter architectures.
The most damaging failures here are silent: the model compiles, simulates,
and produces output — but the numbers are wrong, with no error or warning.
Apply the Block Selection and Frame-Based Configuration rules on every build,
even for tasks a strong model would usually get right — they are the cheap
insurance against silent corruption and they hold across models and effort levels.
When to Use
- Building a Simulink model that processes signals in frames (not sample-at-a-time)
- Choosing source, sink, or visualization blocks for a DSP pipeline
- Adding filters to a streaming model (FIR, IIR, tunable)
- Buffering signals (scalar→frame, frame resizing, overlapping windows, unbuffering)
- Converting sample/frame rates (decimate, interpolate, fractional resample)
- Building multirate models (dual-path, different frame sizes, mixed rates)
- Working with variable-size signals (packet-based, adaptive frame sizes)
- Building a tunable/adjustable filter with runtime parameter control
- Visualizing signals or filter responses (Time Scope, Spectrum Analyzer, Filter Visualizer)
- Computing buffering latency or frame timing
When NOT to Use
- MATLAB-only scripting (no Simulink model) — use standard MATLAB functions
- Continuous-time Simulink modeling (no discrete/DSP blocks)
Model Construction — Use the MCP Model Tools Only (mandatory)
Build and edit every model through the MATLAB MCP model tools — model_edit
(add/connect/configure/delete), model_read, model_check, model_test.
Never construct or modify a model with raw MATLAB commands
(add_block, add_line, set_param, delete_line, new_system, …) run through
evaluate_matlab_code. The MCP tools handle autolayout, undo tracking, and error
recovery; the raw-command fallback is slow (block-by-block round-trips), skips
layout, and is prohibited. Use evaluate_matlab_code only to run/verify a model
(sim, reading logged signals, rebuffer_delay, filter design math) — never to
build one.
Get the schema right the first time — guessing field names wastes turns. The
add-block field is type (a full library path), and connections use target:
add_block: {"op":"add_block", "type":"dspsrcs4/Sine Wave", "ref":"src", "name":"SineWave", "params":{"SamplesPerFrame":"256"}}
connect: {"op":"connect", "target":"#src.y1 -> #buf.u1"} // #ref within the same call
configure: {"op":"configure", "target":"blk_3", "params":{"InputProcessing":"Columns as channels (frame based)"}}
type (NOT source, path, or block) names the block; ref is your handle for chaining, and the response returns ref → blk_id.connect uses target: "src.y1 -> dst.u1" (NOT from/to); y1 = output port 1, u1 = input port 1. Within one call reference just-added blocks as #ref; across calls use the returned blk_N id.- Model-level settings (solver, display overlays) go through a
configure op targeting config:<ModelName>, not set_param:
{"op":"configure", "target":"config:MyModel", "params":{"ShowLineDimensions":"on","SampleTimeColors":"on"}}
Wrong field names fail with a misleading Unrecognized field name "type" — that
error means the operation was missing type, not that the tool is broken.
Build Workflow
Build a streaming DSP model in this order. Each step has a verification.
-
Source — pick the DSP source block (see Block Selection). Set SamplesPerFrame.
-
Frame configuration — confirm the signal is [FrameSize × NumChannels] (column-oriented). See the Frame-Based Configuration Checklist.
-
Processing — add filters / rate conversion / buffering. For each filter, set/inherit frame-based InputProcessing.
-
Sink — pick a DSP display/output block (Time Scope, Spectrum Analyzer — never Scope).
-
Solver — Fixed-step, Discrete (no continuous states).
-
Verify — turn on the model's information overlays so dimensions and rates are visible on the diagram, then confirm signal dimensions read [N×1]/[N×C], not [1×N]. Confirm output against a reference where possible.
- Non-scalar signals → enable signal dimensions via a
configure op: {"op":"configure","target":"config:<model>","params":{"ShowLineDimensions":"on"}}. Wires then annotate their size — a [1×N] label flags a wrong orientation at a glance.
- Multirate models (any two blocks running at different sample times) → enable sample time colors via a
configure op: {"op":"configure","target":"config:<model>","params":{"SampleTimeColors":"on"}}. Each rate draws in a distinct color, so an unintended rate transition or a block stuck at the wrong rate is immediately obvious.
For the task at hand, load the matching reference (see Task References below) once the block-level details are needed.
Block Selection
Select blocks using this table. Never use the generic Simulink equivalent — it
lacks frame-based processing support and silently corrupts framed signals.
Source Blocks
| User intent | Correct block | Library | Key parameter |
|---|
| Read audio/video file | From Multimedia File | dspsrcs4 | AudioFrameSize (dialog: "Samples per audio channel") |
| Load workspace signal (framed) | Signal From Workspace | dspsrcs4 | SamplesPerFrame, SignalName |
| Generate sine/cosine test signal | Sine Wave (DSP) | dspsrcs4 | SamplesPerFrame, Frequency |
| Generate chirp test signal | Chirp (DSP) | dspsrcs4 | SamplesPerFrame |
| Generate noise | Random Source | dspsrcs4 | SamplesPerFrame, SourceType |
Never use From Workspace (Simulink built-in) — outputs [1×N] row vectors, not [N×1] column frames.
Sink Blocks
| User intent | Correct block | Library |
|---|
| View time-domain waveform | Time Scope | dspsnks4 |
| View frequency spectrum | Spectrum Analyzer | dspsnks4 |
| View filter frequency response | Filter Visualizer | dspsnks4 |
| View vector/array snapshot | Array Plot | dspsnks4 |
| Write audio/video to file | To Multimedia File | dspsnks4 |
Discouraged use Scope (Simulink built-in) — no frame-based support, staircase
display, no DSP measurements. This applies even when display is a secondary part
of the task ("…and show the output").
Filter Blocks
| Need | Use | Avoid |
|---|
| FIR filtering | dsparch4/Discrete FIR Filter (frame-based default) | simulink/Discrete/Discrete FIR Filter (sample-based default) |
| IIR via cascaded biquads | Second-Order Section Filter (R2023b+) | Biquad Filter (legacy) |
| Tunable filter | two-block Design→Implementation pattern | monolithic / MATLAB Function |
The Discrete FIR Filter exists in two libraries with the same name — see Checklist Rule 1.
For exact library paths and parameter names of any block, see
references/block-inventory.md — the master lookup; load it when you need a path
for model_edit or need to confirm a parameter name.
Frame-Based Configuration Checklist
These settings produce silent wrong output if left at defaults. The agent
typically knows these facts when asked directly but fails to apply them while
building — run this checklist on every model.
Rule 1: Use the DSP Discrete FIR Filter, not Simulink's
| Library | InputProcessing default | Use for streaming? |
|---|
dsparch4/Discrete FIR Filter (DSP System Toolbox) | "Columns as channels (frame based)" | YES |
simulink/Discrete/Discrete FIR Filter (Simulink built-in) | "Elements as channels (sample based)" | NO |
If you must use any block whose InputProcessing defaults to sample-based, set:
InputProcessing = "Columns as channels (frame based)"
Affected blocks with sample-based defaults: simulink/Discrete/Discrete FIR Filter, Discrete Filter, Biquad Filter.
Why it matters: "Elements as channels (sample based)" treats each element in
the frame as a separate channel. A 256-sample frame becomes 256 single-sample
channels filtered independently — output is garbage, no error thrown.
Exceptions: Second-Order Section Filter, FIR Decimation, FIR Interpolation
default to frame-based — no action needed. And when input is genuinely
multichannel sample-based (e.g. [1×8] from 8 sensors at one instant),
"Elements as channels" is the correct choice — do not reflexively force
frame-based.
Rule 2: FrameBasedProcessingString on Time Scope
After connecting a frame-based signal to Time Scope, set:
FrameBasedProcessingString = "Columns as channels (frame based)"
Same mechanism as Rule 1 — the default shows a staircase display instead of a smooth waveform.
Rule 3: Signal Dimension Convention
DSP signals are column vectors: [FrameSize × NumChannels].
[256×1] = 256-sample frame, 1 channel — CORRECT[1×256] = 1 sample, 256 channels — WRONG for streaming DSP[512×2] = 512-sample frame, 2 channels (stereo) — CORRECT
A [1×N] line means something upstream is wrong (a From Workspace block or a transposing MATLAB Function).
For any model with non-scalar signals, turn on ShowLineDimensions via a configure op ({"op":"configure","target":"config:<model>","params":{"ShowLineDimensions":"on"}}) so every wire is annotated with its size — this makes a stray [1×N] visible on the diagram instead of only discoverable by clicking each signal.
Rule 4: Solver Configuration
Apply via a configure op targeting config:<model> (not set_param):
{"op":"configure","target":"config:<model>","params":{"SolverType":"Fixed-step","Solver":"FixedStepDiscrete","FixedStep":"auto"}}
- Solver type: Fixed-step
- Solver: Discrete (no continuous states) — unless mixing with continuous blocks
- Fixed-step size:
auto (Simulink derives the base rate from block sample times)
Task References
When the build reaches one of these task domains, load the matching reference for
block-level detail, parameters, and timing math. SKILL.md covers the cross-cutting
rules above; these cover the specifics.
| Task | Reference | Load when |
|---|
| Block / library lookup | references/block-inventory.md | Need the exact library path or parameter name for any DSP block referenced in the tables above |
| Buffering / multirate | references/buffering-multirate.md | Changing frame size, overlap windows, unbuffering, dual-path, multirate timing, buffering latency |
| Rate conversion | references/rate-conversion.md | Decimate / interpolate / resample; choosing FIR Decimation vs Downsample; setting RateOptions (single-rate vs multirate) |
| Tunable filtering | references/tunable-filtering.md | Building any runtime-tunable filter; the 8 Design blocks, two-block pattern, SOS vs Biquad, Parameter Smoother |
| Variable-size signals | references/variable-size-signals.md | Frame size changes during simulation; variable→fixed conversion; the Buffer/variable-rate traps |
| Visualization | references/visualization.md | Configuring Spectrum Analyzer (NumInputPorts, spectrogram), Filter Visualizer wiring, Array Plot, Time Scope frame config |
Each reference is self-contained and loaded on demand — read only the one relevant to the current step.
Common Mistakes
| What the agent does wrong | Why it fails | Correct approach |
|---|
Uses From Workspace for audio/signal input | Outputs [1×N] row vector, not [N×1] column frame | Use From Multimedia File or Signal From Workspace |
Uses Scope for signal display | No frame-based processing, staircase display | Use Time Scope (dspsnks4) |
Uses simulink/Discrete/Discrete FIR Filter | Sample-based default — silent wrong output | Use dsparch4/Discrete FIR Filter |
| Leaves InputProcessing at default on a sample-based filter block | Silent wrong output — runs but garbage | Set "Columns as channels (frame based)" or use the DSP block |
| Adds a Buffer before Spectrum Analyzer for scalar input | SA buffers internally — extra Buffer is unnecessary | Connect scalar directly to SA |
| Uses Downsample/Upsample for a rate change | No anti-aliasing/anti-imaging — aliases or images | Use FIR Decimation / FIR Interpolation (or Sample-Rate Converter) |
Reverses RateOptions single-rate vs multirate semantics | Wrong output frame size or frame rate, silently | Single-rate → frame size changes; multirate → frame rate changes (see rate-conversion.md) |
| Builds TFE+ArrayPlot or FFT workaround for filter response | Over-engineered, noisy, needs excitation | Use Filter Visualizer (1 block, exact response) |
| Uses Biquad Filter for IIR | Legacy block, not tunable, no Design-block integration | Use Second-Order Section Filter (R2023b+) |
| Calls the two-block pattern "old" and monolithic "new" | Inverted — two-block IS the modern R2023b+ pattern | Design block → Implementation block is correct |
| Treats the plain Buffer as a variable-size→fixed converter | Buffer requires a fixed compile-time input size | Use dsp.AsyncBuffer (in a MATLAB Function) |
| Models a variable frame size as a variable rate | Frame-size change does not alter the sample period |
Copyright 2026 The MathWorks, Inc.
