microsoft-foundry

# Microsoft Foundry Skill This skill helps developers work with Microsoft Foundry resources, covering model discovery and deployment, complete dev lifecycle of AI agent, evaluation workflows, and troubleshooting. ## Pre-Execution Requirements Follow each applicable subsection below before starting its corresponding action or workflow. ### Dependency Check and Setup **MANDATORY:** As the first step after this skill loads, run the dependency check and setup script below from this skill's root and wait for it to finish before continuing. The script checks first and installs only missing dependencies; it does not reinstall dependencies that are already available. **You MUST complete this check before reading or entering any sub-skill, workflow, or workflow-specific reference.** ```bash ./scripts/check-and-setup-dependencies.sh # macOS / Linux ./scripts/check-and-setup-dependencies.ps1 # Windows (pwsh) ``` Strictly follow the script output for subsequent actions. ### Workflow Guidance **MANDATORY:** Before executing ANY workflow-specific steps, you MUST read the corresponding sub-skill document. Do not call workflow-specific MCP tools for a workflow without reading its skill document. This applies even if you already know the MCP tool parameters — the skill document contains required workflow steps, pre-checks, and validation logic that must be followed. This rule applies on every new user message that triggers a different workflow, even if the skill is already loaded. ### Foundry MCP **MANDATORY:** Before using Foundry MCP operations, call the Azure MCP `foundry` tool and inspect the available Foundry MCP tools and related parameters. Treat this as the discovery/help step for MCP-based workflows. ### azd **MANDATORY:** Before executing ANY azd command, you MUST read [azd-guidance](foundry-agent/azd-guidance/azd-guidance.md) and strictly follow the shared rules defined in it, especially the `AZURE_DEV_USER_AGENT` setting rules. ## Sub-Skills This skill includes specialized sub-skills for specific workflows. **When a sub-skill matches the task, strictly follow its workflow:** | Sub-Skill | When to Use | Reference | |-----------|-------------|-----------| | **deploy** | Deploy hosted agents to Foundry, smoke-test a deployment, create or update prompt agents, and manage agent versions and multi-environment deploys. | [deploy](foundry-agent/deploy/deploy.md) | | **cicd** | Set up a CI/CD deployment pipeline for a Foundry agent. | [cicd](foundry-agent/cicd/cicd.md) | | **invoke** | Send messages to an agent, single or multi-turn conversations | [invoke](foundry-agent/invoke/invoke.md) | | **routine** | Schedule or event-trigger Foundry agents with routines; use `azd` for CRUD, enable/disable, manual dispatch, and viewing past runs, or define routines in `azure.yaml`. | [routine](foundry-agent/routine/routine.md) | | **invocations-ws** | Build, deploy, and connect to hosted agents that speak the `invocations_ws` duplex WebSocket protocol — voice agents, real-time streams, and signaling for out-of-band media transports. | [invocations-ws](foundry-agent/invocations-ws/invocations-ws.md) | | **observe** | Evaluate agent quality, run batch evals, analyze failures, optimize prompts, improve agent instructions, compare versions, set up CI/CD monitoring, and enable continuous production evaluation | [observe](foundry-agent/observe/observe.md) | | **insights** | Pull generated agent insights, evidence, and recommendations from an existing monitor; read-only retrieval, not a new analysis run | [insights](foundry-agent/insights/insights.md) | | **trace** | Query traces, analyze latency/failures, correlate eval results to specific responses via App Insights `customEvents` | [trace](foundry-agent/trace/trace.md) | | **troubleshoot** | View hosted agent logs, query telemetry, diagnose failures | [troubleshoot](foundry-agent/troubleshoot/troubleshoot.md) | | **validate** | Use only when the user explicitly asks to use this validation sub-skill or to validate Microsoft Foundry hosted-agent code against best practices. Never invoke it proactively or add it to another workflow. | [validate](foundry-agent/validate/validate.md) | | **create (quick start)** | Create a new hosted Foundry agent from scratch end-to-end — scaffold, provision or use an existing Foundry project, deploy, and smoke-test. Do not use for any work on existing code. For anything not covered by the quickstart, use **create**. | [create/quick-start-hosted.md](foundry-agent/create/quick-start-hosted.md) | | **create** | Use when the standard end-to-end happy path (quick start) doesn't fit. Create a new Foundry agent, update code of an existing agent, continue development of an existing agent, wire connections at scaffold time, use advanced setup or A2A (Agent2Agent), or recover from a failed quickstart run. | [create](foundry-agent/create/create-hosted.md) | | **agent-optimizer** | Make existing Python hosted-agent code optimization-ready, configure eval.yaml, run Agent Optimizer jobs, apply candidates locally, and deploy through azd after review. | [agent-optimizer](foundry-agent/agent-optimizer/agent-optimizer.md) | | **eval-datasets** | Harvest production traces into evaluation datasets, manage dataset versions and splits, track evaluation metrics over time, detect regressions, and maintain full lineage from trace to deployment. Use for: create dataset from traces, dataset versioning, evaluation trending, regression detection, dataset comparison, eval lineage. | [eval-datasets](foundry-agent/eval-datasets/eval-datasets.md) | | **project/create** | Creating a new Microsoft Foundry project for hosting agents and models. Use when onboarding to Foundry or setting up new infrastructure. | [project/create/create-foundry-project.md](project/create/create-foundry-project.md) | | **resource/create** | Creating Azure AI Services multi-service resource (Foundry resource) using Azure CLI. Use when manually provisioning AI Services resources with granular control. | [resource/create/create-foundry-resource.md](resource/create/create-foundry-resource.md) | | **private-network** | Answer questions about Foundry network isolation **and** deploy Foundry with VNet isolation (BYO VNet, Managed VNet, hybrid). Covers architecture concepts, template selection, deployment, and post-deployment validation. | [resource/private-network/private-network.md](resource/private-network/private-network.md) | | **models/deploy-model** | Unified model deployment with intelligent routing. Handles quick preset deployments, fully customized deployments (version/SKU/capacity/RAI), and capacity discovery across regions. Routes to sub-skills: `preset` (quick deploy), `customize` (full control), `capacity` (find availability). | [models/deploy-model/SKILL.md](models/deploy-model/SKILL.md) | | **quota** | Managing quotas and capacity for Microsoft Foundry resources. Use when checking quota usage, troubleshooting deployment failures due to insufficient quota, requesting quota increases, or planning capacity. | [quota/quota.md](quota/quota.md) | | **rbac** | Managing RBAC permissions, role assignments, managed identities, and service principals for Microsoft Foundry resources. Use for access control, auditing permissions, and CI/CD setup. | [rbac/rbac.md](rbac/rbac.md) | | **finetuning** | Fine-tune models on Microsoft Foundry — SFT distillation, DPO preference optimization, RFT with graders and tool calling. Dataset preparation, grader calibration, training, checkpoint selection, deployment, evaluation. Use for: fine-tune, SFT, DPO, RFT, training data, grader, distillation, fine-tuned model, large file upload. | [finetuning/SKILL.md](finetuning/SKILL.md) | | **azd-guidance** | Provide shared azd knowledge and guidance for managing Foundry agents. Read this first for any workflows related to azd. | [azd-guidance](foundry-agent/azd-guidance/azd-guidance.md) | > 💡 **Tip:** For a complete onboarding flow: `project/create` (public) or `private-network` (VNet isolation) → `models/deploy-model` → agent workflows (`create` → `deploy` → `invoke`). > 💡 **Fine-Tuning:** Use `finetuning` for all model customization — SFT distillation, DPO preference optimization, and RFT with graders. Includes quickstart, grader calibration, and training curve analysis. > 💡 **Model Deployment:** Use `models/deploy-model` for all deployment scenarios — it intelligently routes between quick preset deployment, customized deployment with full control, and capacity discovery across regions. > 💡 **Prompt Optimization:** For requests like "optimize my prompt" or "improve my agent instructions," load [observe](foundry-agent/observe/observe.md) and use the `prompt_optimize` MCP tool through that eval-driven workflow. ## Infrastructure Lifecycle Match user intent to the correct infrastructure workflow. | User Intent | Workflow | |-------------|---------| | "Create Foundry" / "Set up Foundry" (ambiguous) | Use `AskUserQuestion`: (a) just an AI Services resource, (b) a project with public access, or (c) a project with network isolation? Route: (a) → [resource/create](resource/create/create-foundry-resource.md), (b) → [project/create](project/create/create-foundry-project.md), (c) → [private-network](resource/private-network/private-network.md) | | Set up Foundry with VNet isolation | [private-network](resource/private-network/private-network.md) | | Create a Foundry project (public) | [project/create](project/create/create-foundry-project.md) | | Create a bare Foundry resource | [resource/create](resource/create/create-foundry-resource.md) | ## Agent Development Lifecycle Match user intent to the correct agent workflow. Read each sub-skill in order before executing. | User Intent | Workflow (read in order) | |-------------|------------------------| | Create a new hosted agent end-to-end (scaffold + deploy + test) | [dependency check and setup](#dependency-check-and-setup) → [azd-guidance](foundry-agent/azd-guidance/azd-guidance.md) → [quick-start-hosted](foundry-agent/create/quick-start-hosted.md) (self-contained end-to-end) | | Anything beyond the standard quickstart (existing code, migration, re-hosting, deployment customization, scaffold-time connections, A2A (Agent2Agent), recovery) | [dependency check and setup](#dependency-check-and-setup) → [azd-guidance](foundry-agent/azd-guidance/azd-guidance.md) → [create](foundry-agent/create/create-hosted.md) → [deploy](foundry-agent/deploy/deploy.md) → [invoke](foundry-agent/invoke/invoke.md) | | Optimize existing Python hosted agent | [dependency check and setup](#dependency-check-and-setup) → [azd-guidance](foundry-agent/azd-guidance/azd-guidance.md) → [agent-optimizer](foundry-agent/agent-optimizer/agent-optimizer.md) → scaffold/review → eval.yaml → optimize → apply candidate → deploy → invoke | | Deploy an agent (code already exists) | [dependency check and setup](#dependency-check-and-setup) → [azd-guidance](foundry-agent/azd-guidance/azd-guidance.md) → deploy (includes eval-suite setup) → invoke → observe (evaluate/optimize) | | Update/redeploy an agent after code changes | [dependency check and setup](#dependency-check-and-setup) → [azd-guidance](foundry-agent/azd-guidance/azd-guidance.md) → deploy (includes eval-suite setup) → invoke → observe (evaluate/optimize) | | Set up a CI/CD deployment pipeline for a hosted agent | [dependency check and setup](#dependency-check-and-setup) → [azd-guidance](foundry-agent/azd-guidance/azd-guidance.md) → cicd | | Invoke/test/chat with an agent | [dependency check and setup](#dependency-check-and-setup) → [azd-guidance](foundry-agent/azd-guidance/azd-guidance.md) → invoke | | Schedule/event-trigger an agent, or CRUD/enable/disable/dispatch a routine | [dependency check and setup](#dependency-check-and-setup) → [azd-guidance](foundry-agent/azd-guidance/azd-guidance.md) → routine | | Optimize / improve agent prompt or instructions | observe (Step 4: Optimize) | | Evaluate and optimize agent (full loop) | observe | | Enable continuous evaluation monitoring | observe (Step 6: CI/CD & Monitoring) | | Pull agent insights / list generated issues and recommendations | [dependency check and setup](#dependency-check-and-setup) → [insights](foundry-agent/insights/insights.md) (all pages with expanded evidence; read-only) | | Troubleshoot an agent issue | [dependency check and setup](#dependency-check-and-setup) → [azd-guidance](foundry-agent/azd-guidance/azd-guidance.md) → invoke → troubleshoot | | Fix a broken agent (troubleshoot + redeploy) | [dependency check and setup](#dependency-check-and-setup) → [azd-guidance](foundry-agent/azd-guidance/azd-guidance.md) → invoke → troubleshoot → apply fixes → deploy → invoke | ## Agent: .foundry Workspace Standard Every agent source folder can keep Foundry-specific cache and overlay state under `.foundry/`: ```text <agent-root>/ .foundry/ agent-metadata.yaml agent-metadata.prod.yaml suites/ datasets/ evaluators/ results/ ``` - In azd projects, derive deployment context (project endpoint, agent name/version, ACR, App Insights) from `azure.yaml` plus `azd env get-values`; do not duplicate those values in metadata when azd already provides them. - `agent-metadata.yaml` is the preferred local/dev overlay for non-azd values, remote Foundry suite references, local cache paths, result summaries, and explicit overrides. Optional sidecar files such as `agent-metadata.prod.yaml` can hold a single prod or CI-targeted overlay without mixing multiple environments in one file. - `suites/`, `datasets/`, and `evaluators/` are local cache folders. Reuse them when they are current, and ask before refreshing or overwriting them. - See [Agent Metadata Contract](references/agent-metadata-contract.md) for the canonical schema and workflow rules. ## Agent: Setup References - [Standard Agent Setup](references/standard-agent-setup.md) — advanced setup for production workloads that need data-residency control (bring-your-own Cosmos DB / Storage / AI Search via a Foundry capability host). The default `azd ai agent` flow uses **Basic Agent Setup** and does **not** provision `capabilityHosts/agents` — do not flag its absence as a bug. For default post-provision state, see the "Expected env-var fingerprint" section in [foundry-agent/create/create-hosted.md](foundry-agent/create/create-hosted.md). ## Agent: Common Project Context Resolution Agent skills should run this step **only when they need configuration values they don't already have**. If a value (for example, agent root, environment, project endpoint, or agent name) is already known from the user's message or a previous skill in the same session, skip resolution for that value. ### Step 1: Discover Agent Roots and azd Context First check whether the workspace has `azure.yaml` with services using `host: azure.ai.agent`. - **One azd agent service** -> use that service's `project` folder as the agent root. - **Multiple azd agent services** -> require the user to choose the target service/folder. - **No azd agent service** -> search the workspace for `.foundry/` folders that contain `agent-metadata.yaml` or `agent-metadata.<env>.yaml`. - **One match** -> use that agent root. - **Multiple matches** -> require the user to choose the target agent folder. - **No matches** -> for [insights](foundry-agent/insights/insights.md), ask only for missing remote inputs without initializing local files; for create/deploy workflows, seed a new `.foundry/` folder during setup; for other workflows, stop and ask the user which agent source folder to initialize. After selecting an agent root, keep all local `.foundry` cache inspection, source inspection, evaluator suggestions, dataset suggestions, and prompt-optimization context inside that folder only. Do **not** scan sibling agent folders unless the user explicitly switches roots. ### Step 2: Resolve Environment and Deployment Context If `azure.yaml` is present, resolve the azd environment first: 1. Environment explicitly named by the user 2. `AZURE_ENV_NAME` from `azd env get-values` 3. azd default environment from `.azure/config.json` 4. Environment already selected earlier in the session Run `azd env get-values` for the selected environment when project/deployment values are not already known. Prefer azd values for deployment context: | azd Variable | Resolves To | |-------------|-------------| | `AZURE_AI_PROJECT_ENDPOINT` or `AZURE_AIPROJECT_ENDPOINT` | Project endpoint | | `AGENT_<SERVICE>_NAME` | Agent name for the selected azd service | | `AGENT_<SERVICE>_VERSION` | Agent version for the selected azd service | | `AZURE_CONTAINER_REGISTRY_NAME` or `AZURE_CONTAINER_REGISTRY_ENDPOINT` | ACR registry name / image URL prefix | | `APPLICATIONINSIGHTS_CONNECTION_STRING` | App Insights connection string for trace workflows | | `AZURE_SUBSCRIPTION_ID`, `AZURE_RESOURCE_GROUP`, `AZURE_AI_ACCOUNT_NAME`, `AZURE_AI_PROJECT_NAME` | Azure resource lookup and Playground links | When azd supplies these values, use them as the source of truth and do not copy them into `.foundry/agent-metadata*.yaml` on metadata writes. ### Step 3: Select Metadata Overlay and Resolve Environment Inside the selected agent root, choose the metadata file in this order: 1. Metadata filename or path explicitly provided by the user or workflow