debug

name	debug
description	Structured debugging protocol for failed gate checks, failing tests, or unexpected behavior. Use when /gate-check or /tdd fails and the cause is unclear. Phases: Root Cause → Pattern Analysis → Hypothesis Testing → Implementation.

Debug

Investigate and fix: $ARGUMENTS

Phase 1: Root Cause Investigation

Before writing any fixes:

1. Read the full error — Don't skim. Copy the exact error message, stack trace, and file:line references.
2. Reproduce it — Run the failing command fresh and confirm the error is consistent.
3. Read the failing code — Read the test file and the implementation it calls. Don't assume you know what the code does.
4. Check recent changes — Run git diff HEAD or git log --oneline -5 to see what changed before this started failing.

Output a one-sentence hypothesis: "This fails because X in Y."

Phase 2: Pattern Analysis

Before attempting any fix, ask:

1. Isolated failure or symptom?

   • Does changing one thing fix it, or does the error move to a different location?
   • Are multiple tests failing in the same pattern?

2. Is the test itself correct?

   • Could the test be testing the wrong thing?
   • Does the test have setup/teardown issues?

3. Is there environment pollution?

   • Tests that pass in isolation but fail in a suite: suspect shared state, singletons, global mocks, or file system side effects.
   • Find the polluter: run half the test suite, check if the failure occurs, narrow down by bisecting.

4. Is there a timing dependency?

   • Tests that fail intermittently often depend on sleep() or wall-clock time.
   • Replace sleep(N) with condition-based waiting: poll for the condition with a timeout.
   • Fixed sleeps are false gates — they pass on fast machines and fail on slow ones.

Phase 3: Hypothesis Testing

1. State the hypothesis explicitly — Write it down before touching code.
2. Make one change at a time — Don't batch fixes. Each change tests one hypothesis.
3. Run the gate after each change — Don't chain multiple fixes and hope.
4. If the fix doesn't work, revert it — Don't accumulate partial fixes. A failed fix left in the code obscures the next hypothesis.

Phase 4: Implementation

Once the root cause is confirmed:

1. Fix the root cause, not the symptom — If a test is timing-sensitive, don't increase the sleep duration. Fix the timing dependency.
2. Run the gate check after the fix — Read the full output. Report the actual result (e.g., "47 tests, 0 failures, 0 errors").
3. Check for related issues — Did this fix reveal another failure? Address it before declaring done.

The 3-Fix Rule

If you have attempted 3 different fixes and the test still fails:

Stop. Question the architecture.

Don't try fix #4. Instead:

1. Re-read the spec or requirement for this feature
2. Ask: is the implementation approach itself wrong?
3. Ask: does this test reflect what the spec actually requires?
4. Escalate to the user with your findings — describe what you tried and why each failed

Continuing past 3 failed fixes without changing your mental model burns time and obscures the root cause.

Rules

• Do NOT skip Phase 1 — "I know what's wrong" is how debugging sessions fail
• Do NOT batch multiple hypotheses into one fix
• Do NOT increase sleep() durations to fix flaky tests — find the condition and wait for it
• Do NOT claim the issue is fixed without running the gate and reading the actual output
• After 3 failed fixes, escalate — do not attempt fix #4