gh-push

Commit pending changes (optional) and push the current branch to the remote. Use when the user says "push", "push the code", "commit and push", or "send it up". Includes safety checks for main-branch pushes and force-push.

الانتقال إلى التثبيت

المستودع: yofine/Mexus
آخر نشاط في المصدر: ١٩ أبريل ٢٠٢٦ في ١٦:٥٣
لغة SKILL.md المكتشفة: الإنجليزية
النجوم: ٨٦
التفرعات: ٦

خيارات التثبيت

يُحدَّد Prompt الذي يراجع المصدر أولًا بشكل افتراضي. يمكنك التبديل إلى أمر مباشر أو تنزيل نسخة محلية.

التثبيت باستخدام Codex أو Claude انسخ هذا Prompt والصقه في Codex أو Claude أو مساعد آخر ليراجع صفحة Skill ويثبّتها لك.

يتجاوز الأمر المباشر Prompt المخصّص للمراجعة. افحص المصدر قبل تشغيله.

npx skills add https://github.com/yofine/Mexus --skill gh-push

يبقى الأمر في سطر واحد. مرّر أفقيًا لمراجعته كاملًا قبل النسخ.

تفضّل نسخة محلية؟ نزّل الملفات المتاحة حاليًا لدى SkillsMP.

مراجعة ملفات المصدر

اقرأ SKILL.md وأي ملفات مرافقة يعرضها SkillsMP قبل أن تقرر التثبيت.

SKILL.md

تعليمات المصدر · معاينة للقراءة فقط

العودة إلى البحث العودة إلى التثبيت

/gh-push — Commit & Push

Push the current branch to the remote, optionally committing staged/unstaged changes first. Arguments passed: $ARGUMENTS.

Parse arguments

force / -f → force-push (REQUIRES extra confirmation, see Safety below)

no-commit → skip the commit step, push existing commits only

message:"..." → use this commit message instead of drafting one

Any other text → treat as commit message body

Steps

Inspect state (run in parallel):

git status (no -uall)
git diff (unstaged)
git diff --staged
git branch --show-current
git log --oneline -5

Decide what to commit:

If there are no pending changes and no unpushed commits → nothing to do, tell the user.
If there are pending changes and no-commit was NOT set → draft a commit.
If the user listed specific files in arguments, only stage those. Otherwise stage only files relevant to the described change — never git add -A blindly, to avoid pulling in secrets or unrelated work.
Show the user the file list and draft message, then confirm unless arguments already specified a message.

Commit (if applicable) using HEREDOC:

git commit -m "$(cat <<'EOF'
<subject>

<body if needed>

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
EOF
)"

Match the repo's commit-message style (check recent git log).

Push:

Default: git push (or git push -u origin <branch> if upstream not set)
Force-push: only if force was passed AND the branch is not main/master AND the user re-confirms in this turn.
NEVER --no-verify.

After push:

Show git status to confirm clean.
If a PR exists for the branch (gh pr view --json url,state), print its URL.
If no PR and the branch isn't main, suggest creating one (but don't do it unprompted).

Safety

Pushing to main/master directly: warn and confirm once before pushing.

Force-push to main/master: refuse unless the user explicitly says "force push main, I mean it."

If the pre-push hook fails, do NOT retry with --no-verify. Investigate, report, stop.

If git status shows an uncommitted .env / credentials* / *.pem in the staging candidates, flag it and ask before staging.

/gh-push — Commit & Push

Push the current branch to the remote, optionally committing staged/unstaged changes first. Arguments passed: $ARGUMENTS.

Parse arguments

force / -f → force-push (REQUIRES extra confirmation, see Safety below)

no-commit → skip the commit step, push existing commits only

message:"..." → use this commit message instead of drafting one

Any other text → treat as commit message body

Steps

Inspect state (run in parallel):

git status (no -uall)
git diff (unstaged)
git diff --staged
git branch --show-current
git log --oneline -5

Decide what to commit:

If there are no pending changes and no unpushed commits → nothing to do, tell the user.
If there are pending changes and no-commit was NOT set → draft a commit.
If the user listed specific files in arguments, only stage those. Otherwise stage only files relevant to the described change — never git add -A blindly, to avoid pulling in secrets or unrelated work.
Show the user the file list and draft message, then confirm unless arguments already specified a message.

Commit (if applicable) using HEREDOC:

git commit -m "$(cat <<'EOF'
<subject>

<body if needed>

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
EOF
)"

Match the repo's commit-message style (check recent git log).

Push:

Default: git push (or git push -u origin <branch> if upstream not set)
Force-push: only if force was passed AND the branch is not main/master AND the user re-confirms in this turn.
NEVER --no-verify.

After push:

Show git status to confirm clean.
If a PR exists for the branch (gh pr view --json url,state), print its URL.
If no PR and the branch isn't main, suggest creating one (but don't do it unprompted).

Safety

Pushing to main/master directly: warn and confirm once before pushing.

Force-push to main/master: refuse unless the user explicitly says "force push main, I mean it."

If the pre-push hook fails, do NOT retry with --no-verify. Investigate, report, stop.

If git status shows an uncommitted .env / credentials* / *.pem in the staging candidates, flag it and ask before staging.

name	gh-push
description	Commit pending changes (optional) and push the current branch to the remote. Use when the user says "push", "push the code", "commit and push", or "send it up". Includes safety checks for main-branch pushes and force-push.
user-invocable	true
allowed-tools	["Bash(git status)","Bash(git diff)","Bash(git log)","Bash(git branch)","Bash(git add)","Bash(git commit)","Bash(git push)","Bash(gh pr view)"]

name	gh-push
description	Commit pending changes (optional) and push the current branch to the remote. Use when the user says "push", "push the code", "commit and push", or "send it up". Includes safety checks for main-branch pushes and force-push.
user-invocable	true
allowed-tools	["Bash(git status)","Bash(git diff)","Bash(git log)","Bash(git branch)","Bash(git add)","Bash(git commit)","Bash(git push)","Bash(gh pr view)"]

gh-push

معلومات المصدر

خيارات التثبيت

مراجعة ملفات المصدر

المزيد من هذا المستودع

المزيد من هذا المستودع

/gh-push — Commit & Push

Parse arguments

Steps

Safety

/gh-push — Commit & Push

Parse arguments

Steps

Safety