alfworld-object-cooler

# Skill: Cool Held Object ## Purpose Use this skill when you are holding an object (e.g., `pot 1`) that needs to be cooled and you are at the location of a valid cooling receptacle (e.g., `fridge 1`). The skill executes the `cool` action to change the object's state. ## Prerequisites 1. **Object in Hand:** You must already be holding the target object (e.g., `pot 1`). 2. **At Cooling Receptacle:** You must be at the location of the cooling appliance (e.g., `fridge 1`). Use `go to {recep}` to navigate first if needed. 3. **Valid Receptacle:** The receptacle must be a valid target for the `cool` action (e.g., fridge, freezer). The environment will validate this. ## Core Action Execute the `cool` action with the format: `cool {obj} with {recep}`. ## Execution Flow 1. **Verify State:** Confirm you are holding the object and are at the cooling receptacle's location. 2. **Execute:** Perform the `cool` action. 3. **Verify Outcome:** The expected observation is "You cool the {obj} using the {recep}." If the observation is "Nothing happened," the action was invalid—check the prerequisites or try a different receptacle. ## Example from Trajectory * **State:** Holding `pot 1`, at `fridge 1`. * **Action:** `cool pot 1 with fridge 1` * **Result:** Observation: "You cool the pot 1 using the fridge 1." ## Next Steps After successful cooling, the object is ready for the next task step (e.g., `put {obj} in/on {recep}`).