electron-devtools-testing

name	electron-devtools-testing
description	Test the Electron app interactively using Chrome DevTools Protocol. Use when the user asks to test, verify, or interact with the running app via browser automation.

Test the Exo Electron app interactively using Chrome DevTools Protocol (CDP) via the chrome-devtools MCP.

Prerequisites

1. chrome-devtools MCP must be configured — add it to your MCP config:

   claude mcp add chrome-devtools -- npx -y chrome-devtools-mcp@latest --browser-url=http://127.0.0.1:9223
   

   Port 9223 (not the chrome-devtools-mcp default of 9222) avoids conflicting with the user's main Chrome browser, which on this machine already runs with --remote-debugging-port=9222 for the browser-harness setup. The MCP is hard-wired to this port — it reads --browser-url once at subprocess startup and never re-reads it. If you have to launch Electron on a different port (see step 2), the MCP cannot reach it; use direct CDP instead (see Fallback below).

2. Pick a free debug port, then launch the app headless on it:

   PORT=9223
   while lsof -ti:$PORT >/dev/null 2>&1; do PORT=$((PORT+1)); done
   echo "Using CDP port $PORT"
   EXO_DEMO_MODE=true EXO_HEADLESS=true npm run dev -- --remote-debugging-port=$PORT
   

   • EXO_HEADLESS=true makes createWindow skip mainWindow.show() (see src/main/window.ts) and hides the macOS dock icon, so the app does not pop visibly or steal focus — the renderer is still fully alive and CDP-attachable. Always pass it; there is no reason to run this skill non-headlessly.
   • The port probe matters because parallel sibling worktrees (Conductor often has 2–10 agents running at once) can already hold 9223. Without the probe, your npm run dev either fails to bind or, worse, your MCP attaches to the sibling's Electron — you'd be inspecting and "fixing" their renderer, not yours.
   • npm run dev is preferred over npx electron-vite dev directly because the dev script also runs npm run build:worker first — without that, the agent sidebar fails to start with "Agent worker failed to start" since the bundled utility-process worker file is missing.

How It Works

• Electron exposes a CDP endpoint at http://127.0.0.1:<PORT> when launched with --remote-debugging-port=<PORT>
• If <PORT> is 9223, the chrome-devtools MCP connects and you can use its tools
• If <PORT> is anything else, the MCP can't reach it — use direct CDP from a small node script (see Fallback)
• Either way you can navigate, click, type, take screenshots, and inspect the DOM

Workflow

1. Start the app headless on a free port (run in background so the terminal is free):

   PORT=9223
   while lsof -ti:$PORT >/dev/null 2>&1; do PORT=$((PORT+1)); done
   EXO_DEMO_MODE=true EXO_HEADLESS=true npm run dev -- --remote-debugging-port=$PORT
   

   Wait for CDP to come up before doing anything else (the dev-server log is unreliable — wait on the CDP endpoint itself):

   until curl -sf http://127.0.0.1:$PORT/json/version >/dev/null 2>&1; do sleep 1; done
   

   The renderer process runs normally and is reachable over CDP; only the visible window and dock icon are suppressed.

2. List available pages: Use mcp__chrome-devtools__list_pages to see Electron's renderer windows.

3. Select the main window: Use mcp__chrome-devtools__select_page with the page ID of the main app window (not DevTools or blank pages).

4. Take a snapshot to see the current UI state: Use mcp__chrome-devtools__take_snapshot to get an accessibility tree of the page.

5. Interact with the app:

   • mcp__chrome-devtools__click — click buttons, links, tabs
   • mcp__chrome-devtools__fill — type into inputs and textareas
   • mcp__chrome-devtools__take_screenshot — capture visual state
   • mcp__chrome-devtools__evaluate_script — run JS in the renderer context

6. Stop the app when done by killing the background process.

Key UI Navigation

Action	How
Open Settings	Click the gear icon in the top bar
Switch to Prompts tab	Click "Prompts" tab inside Settings
Edit a prompt	Click into the textarea and modify text
Save prompts	Click the "Save" button
Close Settings	Click "X" or press Escape
Switch accounts	Click account selector in the sidebar

Fallback: direct CDP when port ≠ 9223

The MCP only attaches to whatever port it was configured with at startup (9223 here). If the port probe picked something else (9224, 9225, …) because a sibling worktree already had 9223, the MCP tools won't work for this run. Drive CDP directly from a small node script — no install needed, Node 22+ ships a global WebSocket:

// /tmp/cdp.mjs — run with `CDP_PORT=<port> node /tmp/cdp.mjs`
import { writeFileSync } from "fs";
const PORT = process.env.CDP_PORT;
const list = await (await fetch(`http://127.0.0.1:${PORT}/json/list`)).json();
const page = list.find(p => p.type === "page");
if (!page) throw new Error(`No page target on port ${PORT} yet — /json/version can succeed before the renderer registers; retry in a moment`);
const ws = new WebSocket(page.webSocketDebuggerUrl);
let id = 0; const pending = new Map();
ws.addEventListener("message", e => { const m = JSON.parse(e.data); if (m.id && pending.has(m.id)) { pending.get(m.id)(m); pending.delete(m.); } });
  = () =>  ( {  i = ++id; pending.(i, r); ws.(.({ : i, method, params })); });
  ( ws.(, r, { :  }));
 ();



 deadline = .() + ;
 (.() < deadline) {
   r =  (, {
    : ,
    : ,
  });
   (r.?.?. === ) ;
    ( (x, ));
}


 (, {
  : ,
});
  ( (r, ));
 shot =  (, { :  });
(, .(shot.., ));
ws.();

Runtime.evaluate, Page.captureScreenshot, Input.dispatchKeyEvent, and Input.dispatchMouseEvent cover everything the MCP would have given you. Do NOT import { WebSocket } from "ws" — the ws package isn't a project dependency, and only resolves accidentally from random parent node_modules.

Notes

• Demo mode: When launched with EXO_DEMO_MODE=true, the app uses mock data and makes no real Gmail API calls. Useful for testing UI without credentials.
• Sanity-check which Electron you attached to: before trusting any screenshot or click result, confirm the CDP endpoint actually belongs to this worktree. lsof -ti:$PORT gives the PID; ps -p <pid> -o command= should show a path under this worktree (e.g. .../casablanca/node_modules/electron/...). If it points at a sibling worktree, something raced past the port probe — pick the next port and relaunch.
• Stale Electron processes: pkill -f "electron-vite dev" doesn't always kill all child Electron processes from prior dev sessions. If you attach to a stale Electron whose source code is out of date with the disk, code changes will appear to silently no-op. Scope the kill to this worktree's path and your chosen port so you don't nuke sibling agents:

  WORKTREE=$(basename "$PWD")
  pkill -9 -f "$WORKTREE.*Electron.app" 2>/dev/null
  pkill -9 -f "$WORKTREE.*electron-vite dev.*--remote-debugging-port=$PORT" 2>/dev/null
  

  Then verify with lsof -ti:$PORT returning empty.
• Multiple windows: Electron may open multiple pages (main window, DevTools, etc). Always select the correct renderer page (type === "page", not "background_page" or "other") before interacting.
• Hot reload: electron-vite dev supports HMR for the renderer. After main-process code changes, you must restart the app — main-process code does NOT hot-reload.
• Worker bundle is separate: src/main/agents/agent-worker.ts and code it imports get bundled into out/worker/agent-worker.cjs by npm run build:worker. After changes to the agent worker, the bundle must rebuild — npm run dev does this automatically; npx electron-vite dev does NOT.

Driving the agent directly via IPC

To trigger an agent task without simulating Cmd+J + typing in the palette:

mcp__chrome-devtools__evaluate_script({
  function: `async () => {
    const taskId = "test-" + Date.now();
    return await window.api.agent.run(
      taskId,
      ["claude"],          // provider id is "claude" (not "claude-agent")
      "Reply with OK",
      { accountId: "default", userEmail: "[e-mail]" }
    );
  }`,
})

Then poll the trace:

mcp__chrome-devtools__evaluate_script({
  function: `async () => await window.api.agent.getTrace("<taskId>")`,
})

The trace returns { events: [...] } with state, tool_call_start, tool_call_end, text_delta, and done events.