dotnet-threads-analysis

name	dotnet-threads-analysis
description	Analyze .NET application threading issues using CLI diagnostic tools. Use when investigating thread contention, deadlocks, thread pool starvation, sync-over-async patterns, or frozen/unresponsive applications — on a live process or from a memory dump. Works with dotnet-counters, dotnet-trace, dotnet-dump, and dotnet-pstacks.

.NET Thread Analysis

Diagnose thread contention, deadlocks, thread pool starvation, and sync-over-async issues in .NET applications using the standard Microsoft diagnostic CLI tools and custom ClrMD-based tools — no code changes to the target application required.

Prerequisites

The following tools must be installed as global .NET CLI tools:

dotnet tool install -g dotnet-dump
dotnet tool install -g dotnet-counters
dotnet tool install -g dotnet-trace
dotnet tool install -g dotnet-pstacks

Verify with dotnet tool list -g. A .NET runtime (6.0+) is required on the machine; an SDK is not needed to run the tools.

Key Technique: Non-Interactive SOS Commands

dotnet-dump analyze is interactive by default, which does not work well with agents. Always use the -c flag to run SOS commands non-interactively:

dotnet-dump analyze <dump-path> -c "<command1>" -c "<command2>" -c "exit"

Multiple -c flags are executed in sequence. Always end with -c "exit".

---

Note Always start with threads and dotnet-pstacks for a quick overview of thread state distribution before diving into individual call stacks. On Windows, if WinDbg is installed, use !locks and !runaway for additional native lock and CPU-time-per-thread details.

Live Process Investigation

Use this workflow when the application is still running and you want to observe threading behavior or detect contention/starvation without taking a full dump.

Identify the Target

dotnet-dump ps

Lists running .NET processes with PID and name. Confirm the target PID.

Monitor Thread Counters

dotnet-counters monitor -p <PID> --counters System.Runtime

Key counters to watch:

• threadpool-thread-count — climbing steadily = possible starvation or sync-over-async pattern
• threadpool-queue-length — high values = work items waiting for threads
• monitor-lock-contention-count — spikes = lock contention
• threadpool-completed-items-count — compare with queue length to gauge throughput

Watch counters for at least 30 seconds to distinguish a genuine trend from a transient spike. If threadpool-thread-count is steadily climbing (not just spiking under load), this is a strong signal of sync-over-async or thread pool starvation. Compare threadpool-queue-length against threadpool-completed-items-count over time: a growing queue with flat completions confirms the pool cannot keep up.

Press q to stop.

Collect an EventPipe Trace

dotnet-trace collect -p <PID> --providers Microsoft-Windows-DotNETRuntime

Produces a .nettrace file for offline analysis. Add Microsoft-DotNETCore-SampleProfiler for CPU profiling to identify hot threads.

Escalate to Full Dump

If counters reveal contention or starvation but you need to see exact call stacks and lock ownership, capture a full dump:

dotnet-dump collect -p <PID>

Warning: This briefly freezes the process. Confirm with the user before running on a production system. Then continue with the Dump-Based Investigation workflow below.

---

Dump-Based Investigation

Use this workflow when analyzing a .dmp file — either provided by the user or captured via dotnet-dump collect.

Parallel Stacks Overview

dotnet-pstacks <dump>

Merges threads with identical call stacks. Quickly reveals:

• Many threads blocked at the same lock frame -> contention
• Two groups stuck in opposite lock acquisition -> potential deadlock

List All Managed Threads

dotnet-dump analyze <dump> -c "threads" -c "exit"

Shows thread ID, OS ID, state, lock count, and exception info.

Full Stack Trace for All Threads

dotnet-dump analyze <dump> -c "clrstack -all" -c "exit"

Look for Monitor.Enter, Monitor.Wait, SemaphoreSlim.Wait, or ManualResetEventSlim.Wait frames to identify where threads are blocked.

Sync Block Table (Lock Ownership)

dotnet-dump analyze <dump> -c "syncblk" -c "exit"

Shows which thread owns each monitor lock. Columns:

• MonitorHeld: lock held count
• Owning Thread: the thread ID that holds the lock
• SyncBlock Owner: the object being locked on

Deadlock Detection

When the application is frozen and not responding:

1. Run syncblk to find which threads own locks
2. Run clrstack -all to see where each thread is blocked
3. Cross-reference: if Thread A owns Lock 1 and is blocked waiting for Lock 2, while Thread B owns Lock 2 and is blocked waiting for Lock 1 -> deadlock
4. Run dotnet-pstacks for visual confirmation of the circular wait pattern

Quick deadlock check sequence:

dotnet-dump analyze <dump> -c "syncblk" -c "threads" -c "clrstack -all" -c "exit"

Then run separately:

dotnet-pstacks <dump>

Report the deadlock cycle clearly: "Thread X holds Lock A (object 0x...) and waits for Lock B (object 0x...); Thread Y holds Lock B and waits for Lock A."

Inspect Contended Code

When a culprit is found (contended lock, deadlock participant, or sync-over-async blocker), inspect the lock object and surrounding code to understand the root cause:

dotnet-dump analyze <dump> -c "dumpobj <lock-object-address>" -c "exit"

Use dumpmt, dumpclass, and dumpil to examine the type that owns or acquires the lock. Another strategy is to dump the assembly from the dump with .writemem on the corresponding module and decompile the class methods with ilspycmd (to install with dotnet tool install ilspycmd -g if needed) to review the actual lock acquisition order, async call chains, or missing ConfigureAwait(false) calls.

---

Diagnosis Patterns

Symptom	Likely Cause	Key Command
Many threads at same lock frame	Lock contention	dotnet-pstacks + syncblk
App frozen, threads waiting on locks	Deadlock (circular dependency)	syncblk + clrstack -all + dotnet-pstacks
Thread pool count climbing (live)	Sync-over-async / starvation	dotnet-counters
High queue length, low completion rate	Thread pool exhaustion	dotnet-counters
Threads blocked on SemaphoreSlim.Wait	Async throttle saturation	clrstack -all + dotnet-pstacks
Many threads blocked at Task.Result / .GetAwaiter().GetResult()	Sync-over-async	clrstack -all + dotnet-pstacks

Investigation Summary — summary markdown file

Throughout the investigation, maintain a summary file with the following format <date>-<time>_thread_analysis_SUMMARY.md file in the current working directory. Create it before the first command and update it after every step. Use the following structure:

# Thread Investigation Summary

**Date:** YYYY-MM-DD
**Target:** <process name / dump file path>
**Symptom:** <initial problem description>

## Investigation Steps

### Step N — <brief description>

**Command:**
\```
<exact command line>
\```

**Result:**
<relevant output excerpt — thread counts, parallel stacks groups, sync block
owners, deadlock cycles, counter snapshots, etc.>

**Interpretation:**
<what the result means for the investigation>

**Next action:**
<what will be done next and >

<!-- repeat for each step -->



| # | Command | Purpose |
|---|---------|---------|
| 1 |  | Identify target process |
| 2 |  | Parallel stacks overview |
| ... | ... | ... |



 
 
 

The file serves as a full audit trail the user can review, share, or archive.

Safety Guardrails

• Don't forget to generate the summary file
• Never kill a process without explicit user consent
• Warn before dotnet-dump collect on production — it freezes the process
• Prefer live counters over full dump for initial investigation
• Do not attach to system-critical processes (PID 0, PID 4, services)
• If unsure about a process identity, run dotnet-dump ps and confirm with the user before proceeding