routeros-container

name

routeros-container

description

RouterOS /container subsystem for running OCI containers on MikroTik devices. Use when: enabling containers on RouterOS, setting up VETH/bridge networking for containers, managing container lifecycle via CLI or REST API, building OCI images for RouterOS, configuring container environment variables, troubleshooting container issues, or when the user mentions RouterOS container, /container, VETH, device-mode container, or MikroTik Docker.

RouterOS Container Subsystem

Overview

RouterOS 7.x includes a container subsystem (/container) that runs OCI-compatible container images directly on MikroTik hardware. It is NOT Docker — it's MikroTik's own implementation with significant differences.

Requirements:

• RouterOS 7.x with container extra package installed
• Device-mode must be enabled (requires physical access for initial setup)
• Sufficient storage (external USB disk recommended, 100+ MB/s, 10K+ random IOPS)
• ARM, ARM64, or x86 architecture (MIPS not supported for containers)

Device-Mode — Physical Access Required

Container support is gated behind device-mode, which requires physical confirmation (reset button press or power cycle) to enable:

# Enable container mode
/system/device-mode/update mode=advanced container=yes

# After executing: physically confirm within activation-timeout
# - Press reset button, OR
# - Power cycle the device

Device-mode is a general RouterOS security feature — not container-specific. It gates many features (scheduler, fetch, sniffer, etc.) across four modes (home, basic, advanced, rose) with device-dependent factory defaults.

For the full feature matrix, modes, update properties, and physical confirmation details: see the Device-mode reference in the routeros-fundamentals skill.

Mode script bypass (7.22+): During netinstall, a mode script (-sm) can set device-mode on first boot, automatically triggering a reboot. See the routeros-netinstall skill.

Installing the Container Package

# Check if container package is already installed
/system/package/print where name=container

Method 1: Upload .npk file + reboot (offline)

# Upload via SCP (or Winbox drag-and-drop, or WebFig file upload)
scp container-7.22-arm64.npk admin@router:/

# Then reboot to activate
/system/reboot

Method 2: Online package update (requires internet)

/system/package/update check-for-updates
/system/package/update install

This downloads and installs all available updates including extra packages. To enable a specific package already uploaded but not active, use /system/package/enable container then /system/reboot.

Networking Setup

VETH (Virtual Ethernet)

Containers connect to RouterOS networking via VETH interfaces:

# Create VETH pair
/interface/veth/add name=veth-myapp address=172.17.0.2/24 gateway=172.17.0.1

# The VETH name IS the container's interface name (RouterOS 7.21+)

Bridge Setup

# Create a bridge for containers
/interface/bridge/add name=containers

# Add VETH to the bridge
/interface/bridge/port/add bridge=containers interface=veth-myapp

# Assign IP to bridge (acts as gateway for containers)
/ip/address/add address=172.17.0.1/24 interface=containers

NAT / Firewall

# Masquerade container traffic for internet access
/ip/firewall/nat/add chain=srcnat action=masquerade src-address=172.17.0.0/24

# Port forwarding from host to container
/ip/firewall/nat/add chain=dstnat action=dst-nat \
  dst-port=8080 protocol=tcp to-addresses=172.17.0.2 to-ports=80

# Allow container bridge in interface list (if firewall restricts)
/interface/list/member/add list=LAN interface=containers

Layer 2 Networking (Bridge Mode)

For containers that need to be on the same L2 network as physical interfaces (e.g., netinstall):

# Add both physical port and VETH to the same bridge
/interface/bridge/port/add bridge=mybridge interface=ether5
/interface/bridge/port/add bridge=mybridge interface=veth-netinstall

This gives the container direct L2 access to devices on ether5.

Environment Variables and Mounts

There are two ways to attach env vars and mounts to a container (from 7.21+):

Inline (preferred for 7.21+)

Set env= and mount= directly on /container/add — keeps the container self-contained:

# Inline env vars and mount (7.21+)
/container/add remote-image=pihole/pihole:latest interface=veth1 \
  env="TZ=Europe/Riga,WEBPASSWORD=secret" \
  mount="src=disk1/pihole,dst=/etc/pihole" \
  root-dir=disk1/images/pihole logging=yes

This is also how /app YAML works under the hood — inline is the modern pattern and easier for automation (no separate linked objects to manage).

Named Lists (works across all versions)

Create env vars and mounts as separate objects, then reference by name:

# Create named env list (7.20+ uses 'list=', pre-7.20 used 'name=')
/container/envs/add list=MYAPP key=TZ value="Europe/Riga"
/container/envs/add list=MYAPP key=WEBPASSWORD value="secret"

# Create named mount
/container/mounts/add name=appdata src=disk1/appdata dst=/data

# Reference from container (7.20+ uses 'envlists=', pre-7.20 used 'envlist=')
/container/add file=myimage.tar interface=veth1 \
  envlists=MYAPP mountlists=appdata root-dir=disk1/myapp

Best practice: Always place container volumes on external disk (disk1/), never on internal flash storage.

Property Name History

The naming of env/mount reference properties changed at version boundaries:

Version	Env list grouping (/container/envs/add)	Container env reference (/container/add)	Container mount reference
Pre-7.20	key=, value= only (no grouping property)	(no env reference property)	(not available)
7.20	list= added	envlists= (plural) added	(not available)
7.21+	list=	envlists= + inline env=	mountlists= + inline mount=

Version note: Property names for 7.20+ are confirmed against /console/inspect command tree data. Pre-7.20, /container/envs/add had only key and value with no grouping mechanism; /container/add had no env reference property. Inline env= and mount= were added at 7.21.

Container Image Formats

RouterOS accepts container images in these formats:

Option A: Pull from Registry

/container/config/set registry-url=https://registry-1.docker.io tmpdir=disk1/pull
/container/add remote-image=library/alpine:latest interface=veth-myapp

Option B: Import Local Tar File

Upload a Docker v1 tar to the router, then:

/container/add file=myimage.tar interface=veth-myapp

OCI Image Requirements for Local Import

RouterOS's container loader has specific requirements for local tar files:

1. Single layer only — multi-layer images are not supported
2. No gzip compression — layers must be uncompressed tar
3. Docker v1 manifest format — manifest.json + config.json + layer.tar

myimage.tar
├── manifest.json    # [{"Config":"config.json","RepoTags":["name:tag"],"Layers":["layer.tar"]}]
├── config.json      # {"architecture":"arm64","os":"linux","config":{...},"rootfs":{...}}
└── layer.tar        # Uncompressed tar of the full filesystem

See the tikoci-oci-image-building skill for building compliant images without Docker.

Container Lifecycle

CLI

# Create container (7.21+ inline syntax)
/container/add file=myimage.tar interface=veth-myapp \
  env="MY_VAR=hello" mount="src=disk1/appdata,dst=/data" \
  root-dir=disk1/myapp logging=yes

# Start
/container/start [find tag~"myapp"]

# Stop
/container/stop [find tag~"myapp"]

# View status
/container/print

# View logs (if logging=yes)
/log/print where topics~"container"

# Remove (must be fully stopped first)
/container/remove [find tag~"myapp"]

REST API

const base = "http://192.168.1.1/rest";
const auth = { headers: { Authorization: `Basic ${btoa("admin:")}` } };

// List containers
const containers = await fetch(`${base}/container`, auth).then(r => r.json());

// Start container by ID
await fetch(`${base}/container/start`, {
  method: "POST", ...auth,
  headers: { ...auth.headers, "Content-Type": "application/json" },
  body: JSON.stringify({ ".id": "*1" }),
});

// Check status — .running field is "true"/"false" (strings!)
const status = await fetch(`${base}/container/*1`, auth).then(r => r.json());
if (status.running === "true") { /* container is running */ }

// Stop container
await fetch(`${base}/container/stop`, {
  method: "POST", ...auth,
  body: JSON.stringify({ ".id": "*1" }),
});

// Delete — must be fully stopped. Poll .running and retry.
async function deleteContainer(id) {
  for (let i = 0; i < 5; i++) {
    const c = await fetch(`${base}/container/${id}`, auth).then(r => r.json());
    if (c.running === "false") {
      await fetch(`${base}/container/${id}`, { method: "DELETE", ...auth });
      return;
    }
    await new Promise(r => setTimeout(r, 3000));
  }
  throw new Error("Container did not stop in time");
}

REST API Gotchas for Containers

• .running field is the status indicator — values are strings "true" / "false", not booleans
• No .stopped field exists — only check .running
• Delete while stopping = HTTP 400 — must poll .running until "false" before DELETE
• file= for local tar, remote-image= for registry pull
• Container envlists= (plural, 7.20+) references the env list name — note the plural. Pre-7.20 used envlist= (singular). See env/mount version history above.

Container Properties (from 7.22)

Selected properties from /container/add. This is not exhaustive — use rosetta MCP tools (routeros_command_tree at /container/add) for the full list on a specific version.

Property	Description
interface	VETH interface
env	Inline environment variables (7.21+). Comma-separated KEY=value pairs
envlists	Named env list reference (7.20+). See env/mount section above
mount	Inline volume mount (7.21+). src=host/path,dst=/container/path
mountlists	Named mount list reference (7.21+). See env/mount section above
root-dir	Storage location for container filesystem
file	Container tar file (local import)
remote-image	Container image name (registry pull)
cmd	Override container CMD
entrypoint	Override container ENTRYPOINT
hostname	Container hostname
dns	DNS server for container
logging	Enable container stdout/stderr to RouterOS log (yes/no)
start-on-boot	Auto-start container on device boot (yes/no)
workdir	Override working directory
name	Container name (for [find where name=...])
devices	Pass through physical devices (7.20+)
cpu-list	CPU core affinity
memory-high	RAM usage limit in bytes

Architecture Mapping

When pulling from registries or building images, map RouterOS architecture to Docker platform:

RouterOS architecture-name	Docker Platform
arm	linux/arm/v7
arm64	linux/arm64
x86	linux/amd64

Query the router's architecture:

const resource = await fetch(`${base}/system/resource`, auth).then(r => r.json());
const arch = resource["architecture-name"]; // "arm64", "arm", "x86"

/app System (7.21+/7.22+)

RouterOS 7.21 introduced the /app path (built-in app listing). Full YAML app creation (/app/add) was added in 7.22. See the routeros-app-yaml skill for the full YAML specification.

# List available apps
/app/print

# Add app from URL
/app/add yaml-url=https://example.com/myapp.tikapp.yaml

/app vs Manual Container Setup

Concern	Manual (this page)	/app YAML
Networking	Full control — any bridge/VETH/L2 topology	Docker-style: internal subnet with port forwarding (NAT)
L2 bridge access	Yes — add VETH + physical port to same bridge	Not directly — but can assign a bridge post-creation via /app/set network=<bridge>
Multi-container	Manual per-container setup	Declarative YAML, multiple services
Use case	Raw L2 access (netinstall, DHCP relay, etc.)	Standard app deployment with port forwarding

Netinstall specifically requires L2 bridge access for BOOTP/TFTP, which is why the manual VETH+bridge approach is used rather than /app. For typical containers that only need port-forwarded TCP/UDP services, /app is simpler.

Additional Resources

Related skills:

• For netinstall and device-mode automation: see the routeros-netinstall skill
• For building OCI images compatible with RouterOS: see the tikoci-oci-image-building skill
• For the /app YAML format: see the routeros-app-yaml skill
• For general RouterOS fundamentals (CLI, REST, scripting): see the routeros-fundamentals skill

MCP tools:

• For RouterOS documentation and property lookups: use the rosetta MCP server tools (routeros_search, routeros_get_page, routeros_search_properties)

External docs:

• MikroTik official docs: https://help.mikrotik.com/docs/spaces/ROS/pages/84901929/Container