streaming-output

name

streaming-output

description

Stream long-form content to markdown files with resume capability. Writes content incrementally with section markers, enabling recovery if context limits are hit. Use when generating long documents (over 1000 lines), B-SPEC or specification writing, multi-section reports, any task where context compaction may occur mid-generation, or when user explicitly requests streaming output. Commands: init, write, status, resume, finalize, repair.

Streaming Output

Write long-form content incrementally to markdown files with automatic resume capability. If context limits are hit mid-generation, work persists and can be continued.

⚠️ MANDATORY USE CASES

ALWAYS use this skill when:

• Generating B-SPEC documents (typically 1,500-4,000 lines)
• Writing any document expected to exceed 1,000 lines
• Creating multi-section specifications or reports
• Context compaction has already occurred in the conversation
• The continuation prompt mentions streaming-output

DO NOT use manual heredoc appends (cat >> file << 'EOF') for long documents. This pattern fails silently when context compaction occurs mid-write, causing content corruption that is difficult to detect and repair.

---

Commands

Command	Purpose
/stream.init	Initialize output file with section plan
/stream.write	Write next section to file
/stream.status	Show progress, detect resume point, check integrity
/stream.resume	Continue from last completed section
/stream.repair	Fix corrupted/partial sections
/stream.finalize	Strip markers, validate completeness

---

Quick Start

# 1. Initialize with a plan
/stream.init report.md --sections "intro,methodology,findings,conclusion"

# 2. Write sections (repeat for each)
/stream.write intro
/stream.write methodology
# ... if interrupted, resume later with:
/stream.resume

# 3. Finalize when complete
/stream.finalize

---

/stream.init

Initialize an output file with a section plan.

Usage: /stream.init <filepath> --sections "<comma-separated-list>" [--template <template-name>]

Workflow:

1. Create output file (or detect existing)
2. Write header with section plan as YAML frontmatter
3. Generate content hash placeholder for integrity checking
4. Present checklist for tracking

Templates (optional):

• bspec - 15-section B-SPEC structure
• report - Standard report structure
• spec - Generic specification structure

Example:

# Standard initialization
python scripts/stream_write.py init report.md \
  --sections "introduction,background,analysis,recommendations,conclusion"

# B-SPEC template (pre-defined 15 sections)
python scripts/stream_write.py init b-spec-010.md --template bspec

Output file structure:

---
stream_plan:
  version: "2.0"
  sections:
    - id: introduction
      status: pending
      hash: null
    - id: background
      status: pending
      hash: null
    - id: analysis
      status: pending
      hash: null
  created: 2024-01-15T10:30:00
  last_modified: null
  integrity_check: true
---

# Report

<!-- Content will be streamed below -->

---

/stream.write

Write a single section to the file with markers and integrity verification.

Usage: /stream.write <section-id>

Workflow:

1. Check section exists in plan and is pending
2. Generate content for section
3. Compute content hash
4. Write to temporary location first
5. Validate write completed (check for SECTION_END marker)
6. Append to main file with SECTION_START and SECTION_END markers
7. Update section status to completed with hash

Script:

python scripts/stream_write.py write report.md introduction "Your content here..."

Markers in file:

<!-- SECTION_START: introduction | hash:a1b2c3d4 -->
## Introduction

Your introduction content here...

<!-- SECTION_END: introduction | hash:a1b2c3d4 -->

Important:

• Write ONE section at a time
• Verify success before proceeding
• Hash in START and END markers must match (integrity check)

Write Verification

After each write, the skill automatically verifies:

1. SECTION_START marker exists
2. SECTION_END marker exists
3. Hashes in both markers match
4. Content between markers is non-empty

If verification fails, the write is flagged and /stream.repair is recommended.

---

/stream.status

Show current progress, identify resume point, and check integrity.

Usage: /stream.status <filepath> [--verify]

Script:

python scripts/stream_status.py report.md
python scripts/stream_status.py report.md --verify  # Full integrity check

Standard Output:

Stream Status: report.md

Sections:
  [x] introduction (completed) ✓
  [x] background (completed) ✓
  [ ] analysis (pending) <- RESUME HERE
  [ ] recommendations (pending)
  [ ] conclusion (pending)

Progress: 2/5 sections (40%)
Next section: analysis

With --verify flag (integrity check):

Stream Status: report.md

Integrity Check:
  [x] introduction - hash:a1b2c3d4 ✓ valid
  [x] background - hash:e5f6g7h8 ✓ valid
  [!] analysis - CORRUPTED (START without END)
  [ ] recommendations - pending
  [ ] conclusion - pending

⚠️  CORRUPTION DETECTED in section: analysis
    Run `/stream.repair analysis` to fix

Progress: 2/5 sections (40%)
Next section: analysis (requires repair)

Corruption Detection

The status command detects:

• Orphaned START: SECTION_START exists without matching SECTION_END
• Hash mismatch: START and END marker hashes don't match
• Empty section: Markers exist but no content between them
• Duplicate sections: Same section ID appears multiple times

---

/stream.resume

Continue writing from the last incomplete section.

Usage: /stream.resume <filepath>

Workflow:

1. Run status with verification to find resume point
2. Check for corrupted sections (repair if needed)
3. Read existing content for context
4. Continue with /stream.write for next pending section

Script:

python scripts/stream_status.py report.md --resume

Output:

Resume Point: report.md

Last completed: background
Next pending: analysis

Context from previous sections loaded (2,450 tokens)
Ready to write: analysis

Command: /stream.write analysis

If corruption is detected:

Resume Point: report.md

⚠️  CORRUPTION DETECTED
Section 'analysis' has incomplete markers.

Recommended action:
1. Run `/stream.repair analysis` to remove partial content
2. Then run `/stream.write analysis` to regenerate

Command: /stream.repair analysis

---

/stream.repair

Fix corrupted or partial sections.

Usage: /stream.repair <filepath> <section-id> [--strategy <strategy>]

Strategies:

• remove (default): Remove partial content, reset section to pending
• complete: Attempt to add missing END marker (use with caution)
• backup: Create backup before repair

Workflow:

1. Create backup of current file (if --strategy backup)
2. Locate corrupted section
3. Remove content from SECTION_START to end of partial content
4. Update section status to pending
5. Report repair results

Script:

python scripts/stream_repair.py report.md analysis --strategy remove

Output:

Repair Report: report.md

Section: analysis
Issue: Orphaned SECTION_START (no SECTION_END found)
Strategy: remove
Action: Removed 847 characters of partial content

Before: 
  <!-- SECTION_START: analysis | hash:null -->
  ## Analysis
  
  Partial content here...
  [truncated]

After:
  Section 'analysis' reset to pending status

Backup created: report.md.backup.20240115-103045

Ready to regenerate: /stream.write analysis

---

/stream.finalize

Strip markers and validate completeness.

Usage: /stream.finalize <filepath> [--output <output-filepath>]

Workflow:

1. Run full integrity check
2. Verify all sections completed
3. Verify all hashes valid
4. Remove SECTION_START and SECTION_END markers
5. Remove YAML frontmatter stream metadata
6. Validate no incomplete markers remain
7. Write to output file (or overwrite in place)

Script:

python scripts/stream_cleanup.py report.md --output final_report.md

Pre-finalize validation:

Finalize Check: report.md

Sections:
  [x] introduction ✓
  [x] background ✓
  [x] analysis ✓
  [x] recommendations ✓
  [x] conclusion ✓

All sections complete: YES
All hashes valid: YES
Ready to finalize: YES

Finalizing...
Output written to: final_report.md
Markers removed: 10
Lines in final document: 1,247

If validation fails:

Finalize Check: report.md

⚠️  CANNOT FINALIZE - Issues detected:

  [ ] recommendations - PENDING (not written)
  [!] conclusion - CORRUPTED (hash mismatch)

Fix required before finalization:
1. /stream.write recommendations
2. /stream.repair conclusion

---

Recovery Scenarios

Scenario 1: Context limit hit mid-section

The section has SECTION_START but no SECTION_END:

<!-- SECTION_START: analysis | hash:null -->
## Analysis

Partial content here...
[truncated - no SECTION_END]

Recovery:

1. /stream.status --verify detects incomplete section
2. /stream.repair analysis removes partial content and preserves it as context
3. /stream.status shows the preserved context file with preview
4. /stream.write analysis continues from where interrupted (don't restart!)

Context Preservation: When repair runs, incomplete content is saved to a .context file:

report.analysis.context  # Contains the incomplete content

This allows Claude to:

• Review what was being written
• Continue coherently from where interrupted
• Not waste tokens regenerating already-written content

Scenario 2: Session ended between sections

All written sections have both markers:

<!-- SECTION_END: background | hash:e5f6g7h8 -->

Recovery:

1. /stream.resume finds next pending section
2. Continue with /stream.write

Scenario 3: Hash mismatch detected

START and END hashes don't match (content corrupted during write):

<!-- SECTION_START: analysis | hash:a1b2c3d4 -->
...
<!-- SECTION_END: analysis | hash:x9y8z7w6 -->

Recovery:

1. /stream.status --verify flags hash mismatch
2. /stream.repair analysis --strategy remove
3. /stream.write analysis regenerates

Scenario 4: Context compaction during heredoc append (what to avoid)

Problem: Using cat >> file << 'EOF' without streaming-output markers:

# DON'T DO THIS for long documents
cat >> spec.md << 'EOF'
## Section 12
Content...
EOF

If context compaction occurs, the heredoc may be split, causing:

• Partial content written
• No markers to detect corruption
• No way to identify resume point

Prevention: Always use streaming-output for documents >1000 lines.

---

B-SPEC Template

For B-SPEC documents, use the built-in template:

/stream.init b-spec-010-llm-integration.md --template bspec

This creates the standard 15-section structure:

stream_plan:
  version: "2.0"
  template: bspec
  sections:
    - id: overview
      status: pending
      hash: null
    - id: architecture
      status: pending
      hash: null
    - id: section-03  # Domain-specific
      status: pending
      hash: null
    - id: section-04
      status: pending
      hash: null
    - id: section-05
      status: pending
      hash: null
    - id: section-06
      status: pending
      hash: null
    - id: section-07
      status: pending
      hash: null
    -  
       
       
      
       
       
      
       
       
      
       
       
      
       
       
      
       
       
      
       
       
      
       
       

---

Workflow Checklist

Copy and track progress:

Stream Progress: [document-name]
- [ ] Initialize file with section plan
- [ ] Write each section (one at a time):
  - [ ] Section 1: ___________
  - [ ] Section 2: ___________
  - [ ] Section 3: ___________
  - [ ] ...
- [ ] Run status --verify to check integrity
- [ ] Repair any corrupted sections
- [ ] Finalize to strip markers

---

Context-Aware Resume

When context compaction interrupts a section write, the system preserves your work:

Automatic Context Preservation

1. During repair: Incomplete content is saved to <file>.<section>.context
2. On status check: Context files are detected and previewed
3. When resuming: Review the context file to continue coherently

Resume Workflow

# 1. Check status and see context
python scripts/stream_status.py report.md

# Output includes:
# 📝 Context files (from previous incomplete writes):
#    analysis: report.analysis.context (2847 bytes)
#    Preview (last 500 chars):
#    | The normalization formula uses...
#    | This ensures that all criteria...

# 2. Read the full context if needed
cat report.analysis.context

# 3. Continue writing (DON'T restart from scratch)
# Your content should pick up where the context file ended

Important: Continue, Don't Restart

When a context file exists:

• DO: Read it, understand where you left off, continue from that point
• DON'T: Ignore it and regenerate the entire section from scratch

This saves significant tokens and maintains coherence.

---

Best Practices

1. Plan sections upfront: Define all sections before starting
2. One section at a time: Write, verify, then proceed
3. Check status often: Especially after interruptions or compaction
4. Keep sections reasonable: 500-2000 words per section works well
5. Save context: Don't hold generated content in memory; write immediately
6. Use --verify flag: Run /stream.status --verify after resuming
7. Never skip repair: If corruption is detected, repair before continuing
8. Use templates: For known document types like B-SPECs, use built-in templates
9. Review context files: When resuming, always check for and use .context files

---

Anti-Patterns to Avoid

Anti-Pattern	Problem	Solution
Manual heredoc appends	No corruption detection	Use streaming-output
Skipping status checks	Miss corruption	Run status after each write
Ignoring hash mismatches	Propagate bad content	Repair immediately
Writing multiple sections at once	Can't identify failure point	One section at a time
Not using templates	Inconsistent structure	Use bspec template
Finalizing without verify	May include corrupted content	Always --verify first

---

Integration with Continuation Prompts

When creating continuation prompts for long document generation:

1. Explicitly state: "Use streaming-output skill for all document generation"
2. Include status command: "Run /stream.status <file> --verify to check progress"
3. Document section plan: List all sections and their status
4. Specify resume point: "Resume from section: X"

Example continuation prompt snippet:

## Document Generation Status

Using streaming-output skill for B-SPEC-010.

Current status:
- Sections 1-5: Complete ✓
- Section 6: Pending (resume here)
- Sections 7-15: Pending

Resume command: `/stream.resume b-spec-010.md`

---

Scripts Reference

Script	Purpose	Usage
stream_write.py	Init and write operations	python scripts/stream_write.py <command> <args>
stream_status.py	Progress, verification, and resume detection	python scripts/stream_status.py <filepath> [--verify] [--resume]
stream_repair.py	Fix corrupted sections	python scripts/stream_repair.py <filepath> <section> [--strategy]
stream_cleanup.py	Finalize and strip markers	python scripts/stream_cleanup.py <filepath> [--output]

Run any script with --help for detailed options.

---

Changelog

v2.1 (2026-01-03)

• Context preservation on repair: Incomplete content now saved to .context files
• Context-aware status: Status command shows context files with previews
• Resume guidance: Clear instructions to continue from context, not restart
• Added "Context-Aware Resume" section with workflow guidance
• Updated recovery scenarios to emphasize context preservation

v2.0 (2026-01-03)

• Added /stream.repair command for fixing corrupted sections
• Added hash-based integrity checking for section markers
• Added --verify flag to status command
• Added B-SPEC template (--template bspec)
• Added corruption detection (orphaned START, hash mismatch, empty sections)
• Added "Mandatory Use Cases" section
• Added "Anti-Patterns to Avoid" section
• Added "Integration with Continuation Prompts" guidance
• Improved recovery scenarios with specific commands
• Enhanced status output with integrity indicators

v1.0 (Original)

• Initial streaming output implementation
• Basic section markers
• Status and finalize commands