| name | venus-ble-vibrator |
| description | Control a Venus (Cachito) BLE vibrator from natural language. Calls a local HTTP server that broadcasts BLE commands to the toy via macOS CoreBluetooth. Requires hardware setup โ see the ToyBridge repo before installing. |
Venus BLE Vibrator Control
Control a Venus / Cachito (ๅฐ็ซ็ช) BLE vibrator using natural language through OpenClaw.
This is a device-specific skill for Cachito-protocol toys. If your device is supported by Buttplug.io, use the intiface-control skill instead โ no reverse-engineering needed.
macOS only. The server uses CoreBluetooth.
Setup
Follow the ToyBridge setup guide โ complete Steps 1โ3 (discover device ID, configure, verify locally), then start the server:
uv run 4-bridge/server.py
Leave this terminal open. The server runs on port 8888.
Commands the agent will use
Vibrate at intensity
curl -s -X POST http://host.docker.internal:8888/vibrate \
-H "Content-Type: application/json" \
-d '{"intensity": 60}'
intensity: 0โ100 (0 = stop)
Stop immediately
curl -s -X POST http://host.docker.internal:8888/stop
Check status
curl -s http://host.docker.internal:8888/status
If OpenClaw runs natively (not in Docker), replace host.docker.internal with localhost.
Intensity guide
| Range | Feel |
|---|
| 1โ20 | Gentle |
| 30โ50 | Medium |
| 60โ80 | Strong |
| 90โ100 | Maximum |
Preset patterns
| Pattern | What it does |
|---|
pulse | Bursts of 80%, 5 times |
wave | Ramp up 20โ100%, then back down, x2 |
tease | 30% โ 70% โ 100%, escalating, then stop |
Example: "Run the wave pattern" or "Give me a 30-second tease session"
Agent rules
- Always stop (intensity 0) after a timed session unless user says to keep going
- Do not use the
notify tool โ use bash with curl
- Replace
host.docker.internal with localhost if OpenClaw is not in Docker
Troubleshooting
| Problem | Fix |
|---|
BT not ready error | Check Bluetooth is on, grant permission in System Settings โ Privacy |
connection refused | Make sure uv run 4-bridge/server.py is running |
| Device doesn't respond | Double-check DEVICE_ID in 4-bridge/ble_worker.py matches your Cachito controller |
| Wrong intensity | Values are clamped to 0โ100 |
