hydrothermal-synthesis-carbon-dots-180c-dual-022um-filtration

id	45d0ef27-dd75-4fc2-8185-143379827b64
name	hydrothermal-synthesis-carbon-dots-180c-dual-0.22um-filtration
description	A reusable, execution-grade protocol for hydrothermal synthesis of carbon dots (e.g., from citric acid and urea) that enforces a strict 180 °C reaction temperature to prevent PTFE liner deformation and mandates two non-optional 0.22 μm aqueous syringe filtrations — one post-reaction and one post-dialysis — as lab-mandated quality control steps.
version	0.1.1
tags	["carbon-dots","hydrothermal-synthesis","lab-protocol","filtration","temperature-safety"]
triggers	["水热法合成碳点","碳点制备步骤","180度反应釜限制","必须两次0.22微米过滤","柠檬酸尿素体系执行细则"]

hydrothermal-synthesis-carbon-dots-180c-dual-0.22um-filtration

A reusable, execution-grade protocol for hydrothermal synthesis of carbon dots (e.g., from citric acid and urea) that enforces a strict 180 °C reaction temperature to prevent PTFE liner deformation and mandates two non-optional 0.22 μm aqueous syringe filtrations — one post-reaction and one post-dialysis — as lab-mandated quality control steps.

Prompt

Goal

Generate a fully executable, step-by-step laboratory procedure for hydrothermal synthesis of carbon dots using user-specified precursors (e.g., citric acid + urea), strictly adhering to thermal hardware limits and dual-filtration quality gates.

Constraints & Style

• Reaction temperature MUST be exactly 180 °C — no higher, no rounding, no approximation; state "180 °C" unambiguously in all references.
• Hold time at 180 °C MUST default to 4 h unless explicitly overridden by user; do not suggest >4 h without confirmation.
• Two mandatory 0.22 μm aqueous-phase syringe filtrations are required: first immediately after cooling and opening the reactor (to remove particulates and PTFE debris), second after dialysis and before final storage (as final sterility/purity gate).
• Specify consumables precisely: "0.22 μm hydrophilic PVDF syringe filter", "MWCO 500 Da cellulose ester dialysis tubing", "15 mL polypropylene centrifuge tube", "brown glass HPLC vial for storage".
• Include operator actions verbatim where critical: "vacuum-filter using a 10 mL glass syringe", "discard first 0.5 mL filtrate", "rinse filter housing with 0.5 mL DI water and collect rinse in same vial", "label vial with: 'CDs--BATCH#-F2'".
• Never omit unit symbols (e.g., always write "180 °C", "4 h", "0.22 μm", "15 mL") or use ambiguous terms like "room temperature" — instead write "22–25 °C (ambient lab condition)".
• Do NOT recommend alternatives to either mandated filtration (e.g., no centrifugation-only substitution, no single-filter shortcuts).
• Use imperative mood, second-person present tense (e.g., "Weigh", "Transfer", "Filter", "Label").
• Assume deionized water (≥18.2 MΩ·cm) and standard lab equipment unless otherwise specified.
• Output plain Markdown with clear section headers (## Step 1, ## Step 2…); no bullet-point nesting beyond one level; no emojis or decorative symbols.

Workflow

1. Weigh and dissolve precursors in exact masses and volume.
2. Load into PTFE liner; seal reactor; heat to exactly 180 °C; hold for exactly 4 h; cool passively ≥6 h.
3. Open reactor; transfer crude solution to a 15 mL PP tube; vacuum-filter through 0.22 μm PVDF syringe filter into a new tube; discard first 0.5 mL; collect remaining filtrate as "pre-dialysis filtrate".
4. Load pre-dialysis filtrate into MWCO 500 Da dialysis bag; dialyze against 2 L DI water with 6 scheduled water changes (at 6/12/18/24/30/36 h); total dialysis duration = 36 h.
5. Retrieve dialysate; filter again through an identical 0.22 μm PVDF syringe filter into a pre-labeled brown glass vial; rinse filter housing; pool rinse with main filtrate.
6. Store vial at 4 °C in dark; annotate label with date, batch ID, and "F2" (denoting two filtrations).

Triggers

• 水热法合成碳点
• 碳点制备步骤
• 180度反应釜限制
• 必须两次0.22微米过滤
• 柠檬酸尿素体系执行细则