diagnose-entity-graph

name

diagnose-entity-graph

description

Diagnose Entity Graph problems: missing entities, missing edges, disconnected clusters, or filtering issues. Use when the user reports that Entity Graph doesn't look right, services are missing, edges aren't appearing, or environments can't be filtered. Triggers for: "entity graph is empty", "services missing from entity graph", "no edges in entity graph", "disconnected services", "can't filter entity graph", "entity graph not working", "diagnose entity graph", "debug knowledge graph".

Diagnose Entity Graph

Systematic diagnosis of Entity Graph problems using gcx commands. Follow the steps in order — each step narrows the cause. Be direct and report findings concisely.

Start here: read the Orientation block

gcx kg diagnose prints an Orientation block above its check table. Read it first. It tells you which (if any) of the five common Entity Graph scenarios the run matches:

• "I see no entities at all"
• "Some expected entities are missing"
• "I see entities with no edges"
• "I see disconnected clusters of entities"
• "I can't filter to the entities I want"

When the Orientation block names a matched scenario, follow its Next: commands. The per-step playbook below is the fallback for runs where no scenario matched or the matched scenario's hints didn't resolve the issue.

Reading Diagnose Output

Treat gcx kg diagnose's verdicts as authoritative for the queries it ran. Two non-obvious classifications:

• WARN — metric exists … but no series match the requested env/namespace scope means the metric is flowing on the stack but doesn't carry the scoped label value. This is a label-mapping issue (asserts_env vs. deployment_environment, etc.), not a missing-data issue. Investigate the label pipeline (Step 6) before suggesting the user enable new telemetry.
• FAIL — no data (without the WARN above) means the metric was not found, even unscoped — the integration / recording rule is genuinely absent.

For ad-hoc PromQL outside kg diagnose, apply the same discipline: re-run the query without the env / namespace filter before concluding the data is missing.

If a user reports an entity by name, see Step 7's entity-existence workflow before assuming it exists on this stack.

Prerequisites

gcx must be installed and configured with a valid context. gcx kg diagnose bundles most of the per-step checks below; the individual commands produce equivalent results when you need to drill into one check.

gcx config view
gcx kg status

If kg status returns an error, use the setup-gcx skill first.

Step 1: Stack Health

gcx kg status

Check: status must be "complete" and enabled must be true. If not, the Knowledge Graph hasn't been onboarded — stop here and direct the user to the Asserts app onboarding flow.

Shortcut: gcx kg diagnose runs this plus all subsequent checks in parallel.

Step 2: Entity Counts and Scopes

gcx kg summary --since 1h
gcx kg meta scopes

Check: entity counts should be > 0. The meta scopes output shows available env, site, and namespace values.

If scoping to a specific environment, note the exact env value — you'll use it in all subsequent queries.

Step 3: Source Metrics in Mimir

Check whether the raw telemetry that feeds Entity Graph exists. Raw Tempo metrics use deployment_environment, not asserts_env.

Note the label shape difference between the two metrics: traces_target_info describes a single service so it has one deployment_environment label; traces_service_graph_request_total describes an edge between two services and exposes the env on both sides as client_deployment_environment and server_deployment_environment — there is no unified deployment_environment label.

# Service identity (OTel traces)
gcx metrics query 'count(traces_target_info)' --since 1h
gcx metrics query 'count(traces_target_info{deployment_environment="ENV"})' --since 1h

# Call data (inter-service HTTP/gRPC)
gcx metrics query 'count(traces_service_graph_request_total)' --since 1h
# Filter on server side (use client_deployment_environment for outbound view):
gcx metrics query 'count(traces_service_graph_request_total{server_deployment_environment="ENV"})' --since 1h

Interpret:

• Both have data → traces are flowing. Continue to Step 4.
• Both empty → no OTel traces for this environment. Entities may still exist via Prometheus scraping. Continue to Step 4.

For more specific verdicts on this metric pair (Tempo metrics generation disabled, broken trace context propagation, service-name collision via self-loop edges), run gcx kg diagnose --env ENV and read the check results — the command encodes the detection logic and emits a targeted recommendation per case.

Step 4: Recording Rules

Recording rules convert raw metrics into the asserts:* metrics that Entity Graph consumes. These use asserts_env, not deployment_environment.

# Entity discovery (central to how services appear)
gcx metrics query 'count(asserts:mixin_workload_job{asserts_env="ENV"})' --since 1h

# CALLS edges
gcx metrics query 'count(asserts:relation:calls{asserts_env="ENV"})' --since 1h

# Request rate KPI
gcx metrics query 'count(asserts:request:rate5m{asserts_env="ENV"})' --since 1h

Interpret:

• asserts:mixin_workload_job has data but asserts:relation:calls doesn't → entities are discovered but no edges exist. Continue to Step 5.
• All empty → recording rules aren't producing output. Check Step 6 (labels).
• All have data → pipeline is healthy. For a specific missing service, go to Step 7.

Step 5: Edge Source Analysis

CALLS edges can come from many sources, not just OTel traces:

Source	Input Metric	Requires Traces?
app_o11y_servicegraph	traces_service_graph_request_total	Yes
springboot	http_server_requests_seconds_count	No
nginx_ingress	nginx_ingress_controller_requests	No
istio	istio_requests_total	No
aws_rds	CloudWatch RDS metrics	No
aws_dynamodb	CloudWatch DynamoDB metrics	No
aws_s3	CloudWatch S3 metrics	No
aws_applicationelb	CloudWatch ALB metrics	No
azure_flexible_server	Azure DB metrics	No
kafka_exporter	Kafka exporter metrics	No
dbo11y_*	Database observability metrics	No

# What edge sources are active on this stack?
gcx metrics labels --label asserts_source

# Check common Prometheus-based sources for a namespace:
gcx metrics query 'count(http_server_requests_seconds_count{namespace="NS"})' --since 1h
gcx metrics query 'count(nginx_ingress_controller_requests{namespace="NS"})' --since 1h
gcx metrics query 'count(istio_requests_total{namespace="NS"})' --since 1h

Critical: Check for the asserts_env gap. If a source metric exists but has no asserts_env label, the recording rules silently drop it. This is the most common reason for "metrics present but no edges":

# For each source that returned data above, check if it has asserts_env:
gcx metrics query 'count(istio_requests_total{asserts_env!=""})' --since 1h
gcx metrics query 'count(http_server_requests_seconds_count{asserts_env!=""})' --since 1h
gcx metrics query 'count(nginx_ingress_controller_requests{asserts_env!=""})' --since 1h

If the metric exists but the asserts_env!="" query returns "No data", the Mimir relabeling rules don't cover this source. The fix is to add a relabeling rule that maps namespace or another label to asserts_env for this metric.

Interpret:

• No edge sources for this environment → edges are expected to be missing. Services need tracing or one of the Prometheus-based sources above.
• Edge source exists but missing asserts_env → relabeling gap. Recording rules require asserts_env!="" and will silently ignore this data.
• If services are discovered via JMX (job contains jmx) → JMX alone cannot produce edges. Spring Boot Actuator or OTel tracing is needed.

Shortcut: gcx kg diagnose detects this gap automatically and warns when edge source metrics exist but lack asserts_env.

Most common fix: If metrics have deployment_environment but not asserts_env, the Asserts environment mapping is misconfigured. Go to Asserts app → Configuration → Connect Environment → Prometheus and set the environment label to deployment_environment. This tells the Mimir relabeling pipeline to derive asserts_env from deployment_environment on all incoming metrics — not just target_info.

If metrics lack both deployment_environment AND asserts_env: The scrape pipeline needs to add deployment_environment first. In Alloy, use prometheus.relabel to copy namespace (or another label) to deployment_environment before remote_write. Then configure the Connect Environment page as above.

Alternative path: Enable OTel tracing to get edges via traces_service_graph_request_total instead. Tempo generates this metric server-side with asserts_env already populated, bypassing the Mimir relabeling pipeline entirely.

Step 6: Label Pipeline

The most common issue: deployment_environment isn't mapped to asserts_env.

gcx metrics labels --label deployment_environment
gcx metrics labels --label asserts_env

Check: Every deployment_environment value should have a corresponding asserts_env value. If one is missing, the Mimir relabeling rules aren't configured for that environment.

Extra asserts_env values (like AWS account IDs) that don't match any deployment_environment are normal — they come from non-OTel sources.

Shortcut: gcx kg diagnose labels automates this cross-reference.

Step 7: Per-Service Investigation

For a specific missing or edge-less service:

# Find in graph
gcx kg entities query "MATCH (s:Service {name: \"SERVICE\"}) RETURN s" --since 1h

# Check relationships
gcx kg entities query "MATCH (s:Service {name: \"SERVICE\"})-[r]-(other) RETURN s, r, other" --since 1h

# Source metrics
gcx metrics query 'count(traces_service_graph_request_total{client="SERVICE"})' --since 1h
gcx metrics query 'count(traces_service_graph_request_total{server="SERVICE"})' --since 1h

# Recording rule output
gcx metrics query 'count(asserts:relation:calls{service="SERVICE"})' --since 1h
gcx metrics query 'count(asserts:mixin_workload_job{service="SERVICE"})' --since 1h

Interpret:

• Found via Cypher but no relationships → check source metrics above.
• server series exist but asserts:relation:calls doesn't → recording rule label mismatch (check asserts_env and namespace).
• Not found via Cypher → check traces_target_info{service_name="SERVICE"}.
• Leaf services (queue consumers, processors) correctly have no outgoing edges.

Shortcut: gcx kg diagnose service SERVICE --env ENV runs all checks and produces an interpreted diagnosis with suggested next steps. It also detects two common patterns that present as "missing entities":

• Service-name collision (multiple workloads share one service.name, collapsing into one entity).
• Env-scope split (workloads in the same namespace disagree on deployment.environment, so cross-env calls don't render as edges).

Read the diagnose check's Recommendation for the specific fix.

Producing a Report

Summarize findings as:

1. Stack health — KG enabled and complete?
2. Entity count — how many for the scoped environment?
3. Discovery path — OTel traces, Prometheus scrape, or cloud integration?
4. Trace data — do traces_target_info and traces_service_graph_request_total exist?
5. Edge data — does asserts:relation:calls exist? Which asserts_source values?
6. Alternative edge sources — Spring Boot, nginx, Istio, cloud integrations available?
7. Label mapping — deployment_environment correctly mapped to asserts_env?
8. Conclusion — expected state or configuration issue?
9. Recommendations — what would fix it?

When recommending a fix, set expectations on convergence time. The metrics the Knowledge Graph reads from (asserts:* recording rules, and the traces_* series Tempo generates) are time-series with a query lookback window — old data with the broken state will keep appearing in queries for at least 5–15 minutes after the fix is applied. The Entity Graph UI should fully stabilize on the corrected state within that window.