| name | warp-deploy-send-test |
| description | Run the post-deploy send test that validates a freshly deployed or updated warp route end-to-end — real token transfers across the route's legs, delivery confirmation, and fee-accrual checks. Use when asked to send-test, round-trip, or validate transfers on a warp route. Defaults to a full collateral-mesh test for multi-collateral routes. |
Warp Route Send Test
Validate that a deployed warp route actually moves value: dispatch real transfers across its legs, confirm delivery on each destination, and — on fee-enabled routes — confirm the fee is charged. Run it before transferring ownership away from the deployer, so anything wrong is still fixable with the deployer key.
Delivery, balances, funding, and the run log are owned by other skills — this skill composes them:
/warp-balances — router collateral / synthetic supply, and per-address balances (fee-accrual + live-balance checks)./warp-deploy-fund-deployer — funds/top-ups the deployer via the fundkey script; the single owner of the funding contract./start-http-registry + /stop-http-registry — private-RPC registry for reliable delivery (start without --writeMode; sends don't write the registry)./warp-run-log — durable per-run log.
Inputs
- Warp route ID — required.
- Deployer key(s) per protocol (
--key.<protocol>) — the sender. Auto-loaded from the key-context artifact like the rest of the deploy chain; see /warp-key-value-expansion.
- Collateral balances on each collateral leg's deployer address, enough to seed the mesh.
Command
hyperlane warp send (typescript/cli/src/commands/warp.ts). Relevant flags:
| Flag | Use |
|---|
-w, --warp-route-id | the route |
--origin / --destination | one directed leg (mutually exclusive with --chains) |
--chains | an explicit ordered path across several chains |
--round-trip | send to every chain in the config (2-leg routes) |
--amount | amount in the token's smallest unit |
--recipient | required for non-EVM destinations; defaults to the destination signer on EVM |
--timeout | seconds to wait for delivery |
--quick | dispatch without waiting for delivery |
--source-token / --destination-token | pick a specific leaf on CrossCollateralRouter routes |
Test shape
Enrollment coverage (why the mesh)
A warp send A→B exercises only A's outbound enrollment — it proves A's router has B enrolled, and says nothing about B's router. A leg that peers enrolled inbound but whose own enrollment tx failed still accepts *→X sends yet reverts on every X→* send — a silently one-way-dead leg. So every chain must appear as an origin at least once; a chain never used as --origin has its outbound enrollment unverified. The full mesh below satisfies this; the bare minimum is one originating send per chain. To check enrollment directly instead of by sending, read that chain's own router state (remoteRouters via hyperlane warp read) — never infer X's enrollment from a peer that lists X. The authoritative enrollment check is the hyperlane warp check in /warp-verify-onchain-config (it reads each chain's own state), not an ad-hoc send.
Pick the shape from the route's collateral topology:
Simple route (one collateral + one synthetic)
A round trip is enough:
hyperlane warp send -w <ID> --registry http://localhost:<port> \
--origin <collateral> --destination <synthetic> --amount <n> --key.<protocol> "$KEY"
Multi-collateral route — full mesh (default)
A single round trip leaves most legs untested. Exercise every collateral leg as both source and destination, in three phases. Sizes are illustrative — size to the deployer's real balances, keeping a reserve on each collateral chain so Phase 2 has a funded source.
Phase 1 — seed (collateral → synthetic/hub). From each collateral chain, send into the synthetic (or a chosen hub) leg. This locks collateral in each router and mints the synthetic, so destinations have collateral to release in Phase 2.
Phase 2 — collateral ↔ collateral. A small cycle where each chain is a source and a destination once (e.g. A→B, B→C, C→D, D→A). This is the first exercise of cross-VM destinations.
Phase 3 — unwind. Drain every router back toward zero, opposite direction (synthetic → each collateral, and reverse any Phase-2 residue). Compute each drain amount from the live on-chain balance at send time (/warp-balances), not a nominal running total — on a fee-enabled route the fee is minted in-kind to the beneficiary, so the deployer's spendable balance is less than the nominal (see Fees below).
Validate before fanning out
Fire leg 1 end-to-end first and confirm delivery before launching the rest. Then confirm the first cross-VM origin and the first cross-VM destination before committing the remaining legs. If a leg won't deliver, pause and report rather than locking more collateral into legs that can't complete.
Delivery
Delivery is by the production relayer, which already indexes these mainnet mailboxes and delivers even an unregistered route (seconds to a couple of minutes; cross-VM legs slower). Poll delivery per leg (/warp-balances on the destination, or explorer/status) rather than assuming success.
Do not rely on CLI self-relay (--relay / /self-relay-hyperlane-message) for mainnet destinations whose default ISM is a merkle-root multisig aggregation — the CLI relayer returns Merkle proofs are not yet supported. Self-relay only helps against a destination whose ISM the CLI can build metadata for.
Interchain gas
Interchain-gas cost is paid by the sender in the origin's native token and varies sharply by destination — delivering to Tron/SVM destinations can be an order of magnitude more expensive than an EVM destination. Before each phase, check the deployer's native balance on each origin against the per-destination gas the send will quote. On a shortfall, top up via /warp-deploy-fund-deployer (fundkey script). Only prompt the user if that automated funding path can't cover it — don't block on a shortfall the funding skill can resolve.
Fees
On a fee-enabled route the fee is charged in the transferred token itself and minted to the fee beneficiary — delivery alone does not prove the fee worked. After the sends, confirm the fee accrued: read the beneficiary's balance with /warp-balances --address <beneficiary> and check the delta equals the expected fee (fee bps × transferred amount) across the legs. Report the accrual, not just "delivered".
Return-leg sizing. A leg receives forward_amount, but sending it back charges amount + fee from the sender — so the return must be smaller than what was received: floor(forward_amount / (1 + fee_bps/10000)) (e.g. forward 10000 at 10 bps → return ≤ 9000). With no fee, use the same amount both ways. In the unwind, read the live balance rather than the nominal, since the in-kind fee has already reduced it.
For a route with an OffchainQuotedLinearFee where no offchain quote is set on-chain, the immutable on-chain LinearFee fallback applies, so a plain warp send charges the configured rate and exercises the fee direction with no quoting service — pass --fee-quoting-url only when a live quoting service is actually in use.
Flow
- Confirm the route is deployed and the deployer holds collateral on each collateral leg. Determine the test shape from the topology.
- If the deploy already left a private-RPC registry running, reuse it; otherwise start one per
/start-http-registry (no --writeMode). Note the port + task ID. Right after a deploy the registry may not have refreshed its in-memory cache — the first warp send can 404 route not found; wait ~5s before the first send, and if it still 404s verify the config is served (curl http://localhost:<port>/deployments/warp_routes/<TOKEN>/<chains>-config.yaml), sleep 5s, and retry once.
- Budget interchain gas per origin/destination; top up via
/warp-deploy-fund-deployer where short.
- Run Phase 1; validate leg 1 (and the first cross-VM origin) before the rest.
- Run Phase 2; validate the first cross-VM destination before the rest.
- Run Phase 3, draining from live balances until every router is ~0.
- Verify fee accrual to the beneficiary (fee routes).
- Stop the registry per
/stop-http-registry, even on failure.
Log each leg (message ID, amount, delivery time), each gas top-up, and the final drained state to the run log per /warp-run-log.
Caveats
- Run pre-ownership-transfer so failures are fixable with the deployer key.
- Delivery ≠ correctness. Confirm destination balance moved and (fee routes) the beneficiary accrued the fee.
- Drain from live balances, never nominal totals — the in-kind fee makes them diverge.
- Cross-VM legs are slower and pricier; budget gas per destination and expect longer delivery.
