Run any Skill in Manus with one click

workload-flashx

Stars2

Forks3

UpdatedJuly 10, 2026 at 01:06

Flash-X-specific knowledge for the dftracer pipeline — build system (Python setup + GNU Make), Sedov 3D test problem, dangling symlinks in shallow clones, HDF5/flash.par pitfalls. Load this skill whenever working with Flash-X.

Installation

Install with Codex or Claude Copy this prompt, paste it into Codex, Claude, or another assistant, and let it review the skill page and install it for you.

Run Skill in Manus

Source

llnl

llnl/dftracer-agents

View GitHub Repository View Creator Repositories

Download

Run Skill in Manus

Related occupationsSOC

Based on SOC occupation classification

Software DevelopersComputer and Mathematical Occupations·SOC 15-1252

SKILL.md

readonly

Flash-X workload notes

Flash-X (git@github.com:Flash-X/Flash-X.git) is a Fortran/C++/C multiphysics AMR code built with its own Python setup script + GNU Make (NOT cmake/autotools).

Build system

Top-level ./setup <Problem> -auto -<dim> (e.g. ./setup Sedov -auto -3d) generates an object/ build dir; then make in that dir.
Machine config lives under sites/; Makefile.h picks compilers/HDF5.
Point HDF5 at a source-built install in the session workspace, never the Cray/system HDF5 module. See [[software-hdf5]] and [[feedback_always_source_hdf5]].

Sedov 3D test problem

source/Simulation/SimulationMain/Sedov/ — flash.par + tests/*.par variants.
Prior config: FUNCTION + DATA_DIR=all tracing, ~768 ranks, wall ≥ 30 min.

Instrumentation strategy (Fortran-heavy code)

Flash-X is ~2600 Fortran (.F90) files vs 126 C / 6 C++ / 70 Python — dftracer's clang auto-annotator only covers C/C++/Python. Decided approach (2026-07-08): FUNCTION mode always; auto-annotate the C/C++ IO layer first; ASSESS I/O-path coverage; if low, MANUALLY annotate key Fortran IO routines (source/IO/IOMain/**) with dftracer's Fortran API. Always run with PRELOAD + DATA_DIR=all so HDF5/POSIX/MPI I/O is captured at the library level regardless of source annotation. See [[dftracer-preload-run]].

Pitfalls (dated lessons: symptom → root cause → fix)

2026-07-07: session_create crashed with FileNotFoundError on source/physics/sourceTerms/Stir/StirMain/TurbGen.h → Flash-X ships dangling symlinks (targets not present in a --depth 1 clone) and shutil.copytree dereferenced them → fix: copy with symlinks=True, ignore_dangling_symlinks=True (done in mcp_tools/tools/session/session_tools.py + siblings). Restart the MCP server after the fix.
flash.par 80-column pitfall: long absolute output paths get silently truncated → keep a short ds symlink to the Lustre output dir and reference that in flash.par instead of the full path.
Traces must land in <WS>/traces/ (workspace), NOT the Lustre output dir — set DFTRACER_LOG_FILE to the workspace explicitly. See [[feedback_optimization_pipeline_traces]].
2026-07-08 (build): Cray PE ftn/craycc FAILED to build Flash-X (Fortran flag incompatibilities) → use the GNU 11.2 MPI wrappers at /opt/cray/pe/mpich/9.0.1/ofi/gnu/11.2/bin/{mpif90,mpicc,mpicxx} instead. Set MPI_PATH=/opt/cray/pe/mpich/9.0.1/ofi/gnu/11.2 and HDF5_PATH=<WS>/hdf5_1.14 in sites/Prototypes/Linux/Makefile.h.
2026-07-08 (build): gfortran strict checking vs MPI Fortran module interfaces → add -fallow-argument-mismatch to FFLAGS or the build fails on MPI type mismatches. Working Sedov 3D build: ./setup Sedov -auto -3d then make -j in object/; exe is object/flashx. LD_LIBRARY_PATH must include CCE libs + /usr/lib64 at link time.
2026-07-08 (annotation): Flash-X is Fortran-heavy (~2600 .F90 files) with C/C++ IO layer. Fortran entry point program Flashx in source/Simulation/main.F90 has no C main() for DFTRACER_C_INIT/FINI → create a C wrapper file object/dftracer_init_fini.c with __attribute__((constructor)) and __attribute__((destructor)) to auto-call DFTRACER_C_INIT/DFTRACER_C_FINI. Add the .o to ALL_OBJ_FILES in object/Makefile and ensure it links. See [[dftracer-annotate-general]] for the exact wrapper pattern.
2026-07-08 (annotation): CCE Fortran linker (crayftn) may not fire constructor/destructor attributes reliably → if FUNCTION mode produces no traces despite wrapper being linked, pivot to PRELOAD mode immediately. PRELOAD mode captures HDF5/POSIX I/O at the library level without requiring source annotations to work. Set DFTRACER_INIT=PRELOAD, DFTRACER_DATA_DIR=all, and use LD_PRELOAD=<path>/libdftracer_core.so.4.1.0.
2026-07-08 (runtime): CCE runtime libraries must be in LD_LIBRARY_PATH: /opt/cray/pe/cce/20.0.0/cce/x86_64/lib — without this, the binary fails to find libcraymp.so and other CCE runtime deps at runtime even though it links.
2026-07-08 (runtime): module load inside a bash script submitted via flux proxy HUNG indefinitely — Lmod re-loading already-loaded modules in a Flux allocation causes a deadlock in the Lua module interpreter. The script showed 768 bash processes all stuck on /usr/bin/lua /usr/share/lmod/lmod/libexec/lmod shell load cray-mpich/9.0.1. Fix: Do NOT load modules inside the bash script when running under flux proxy — the allocation already has the correct modules loaded. Verify with module list inside the script if needed, but never reload.
2026-07-08 (trace analysis): Flash-X Sedov 3D I/O pattern — primary bottleneck is io_h5write_unknowns_ (32% of I/O time), secondary is the xfer pipeline (io_xfer_cont_slab → io_h5_xfer_wrapper → io_h5_xfer → io_h5_type_matched_xfer) at 26.6%. Attribute creation (io_h5_attribute_create, 156 calls) is 9.6%. Optimization: increase checkpointFileIntervalTime (default 0.01 → 0.05), reduce plot_var_N count, enable HDF5 collective I/O.

Build Session 2026-07-08: Flash-X Sedov 3D Baseline

Successfully built Flash-X Sedov 3D baseline executable on Tuolumne.

Steps:

Built HDF5 1.14.3 from source (curl from HDF5 FTP mirror) into workspace
Patched HDF5 header (H5Apublic.h line 932: chid_t → hid_t)
Initialized PARAMESH submodule before setup
Ran setup with HDF5_PATH env var: HDF5_PATH=<WS>/hdf5_1.14 ./setup Sedov -auto -3d
Updated object/Makefile.h HDF5_PATH to workspace
Built with make -j4 in object dir

Result:

Executable: <WS>/baseline/source/object/flashx (6.6M, dynamically linked)
Exit code: 0 (success)
Requires LD_LIBRARY_PATH to include <WS>/hdf5_1.14/lib at runtime

Critical lessons:

PARAMESH submodule MUST be initialized before setup or it fails
HDF5_PATH env var is honored by setup script to override Makefile.h defaults
GNU 11.2 MPI wrappers are used (auto-detected, working correctly)
No code errors, build completed successfully on first attempt after setup

Large-Scale Production Run Configuration

MANDATORY: Every baseline and optimization iteration must run on the user's active allocation with ALL nodes, using Lustre for I/O.

Problem Size Requirements

To produce meaningful optimization results, the problem must be large enough to:

Use ~50% of node memory (~250 GB per node on Tuolumne)
Run for at least 30 minutes (to amortize startup overhead)
Generate substantial I/O (checkpoint files should be multi-GB)

Flash-X Grid Sizing Formula

Flash-X memory per cell ≈ 200 bytes (conservative estimate for Sedov 3D with AMR). For 8 nodes × 250 GB target = 2 TB total:

Total cells needed: 2 TB / 200 B ≈ 10 billion cells
Uniform grid: cube_root(10B) ≈ 2150³
With AMR (lrefine_max=6, typical 2-4× refinement): base grid ~ 512³ to 1024³

Recommended large-scale config for 8 nodes:

# Grid parameters (uniform base grid, AMR refines up to lrefine_max)
iProcs = 8          # 8 MPI ranks in X (1 per node)
jProcs = 1
kProcs = 1
# OR for better decomposition:
iProcs = 2
jProcs = 2
kProcs = 2

# With AMR, effective resolution can be much higher
lrefine_max = 6

# I/O parameters — frequent checkpoints to generate I/O load
checkpointFileIntervalTime = 0.05   # checkpoint every 0.05 time units
checkpointFileIntervalStep = 0
nend = 100000
tmax = 0.5                          # longer runtime

# Output to Lustre
basenm = "$LUSTRE_ROOT/flashx/sedov_"

Allocation-Aware Run Rules

ALWAYS ask the user for their active allocation ID before any large run.
Use ALL nodes in the allocation (flux run -N <nnodes> -n <ntasks> --exclusive).
Route I/O to Lustre — set basenm in flash.par to a path under /p/lustre5/$USER/.
Create the Lustre output directory before running (mkdir -p /p/lustre5/$USER/flashx).
Verify the allocation is still active with flux jobs before submitting.
Wall time: request at least 60 minutes for a 30-minute app run (dftracer overhead + safety margin).

Flux Proxy Run Pattern (MANDATORY)

Never pass environment variables inline with flux proxy <id> flux run -x VAR. flux proxy opens an SSH tunnel to the allocation broker; environment variables set in the local shell are not automatically forwarded through the proxy. Instead, wrap the entire run in a bash script and invoke that script via flux proxy:

# 1. Create a run script that exports ALL env vars internally
# NOTE: Do NOT load modules inside the script — the Flux allocation already has
# the correct modules loaded. Re-loading modules via Lmod inside a flux proxy
# job causes a deadlock in the Lua interpreter.
cat > production_run.sh << 'EOF'
#!/bin/bash
set -e

# Environment
export PATH="$PROJECT_ROOT/.venv/bin:$PATH"
export LD_LIBRARY_PATH="${WS}/hdf5_1.14/lib:${WS}/install/lib/python3.13/site-packages/dftracer/lib64:/opt/cray/pe/cce/20.0.0/cce/x86_64/lib:$LD_LIBRARY_PATH"

# DFTracer setup
export DFTRACER_ENABLE=1
export DFTRACER_INIT=PRELOAD
export DFTRACER_DATA_DIR=all
export DFTRACER_INC_METADATA=1
export DFTRACER_LOG_FILE="${WS}/traces/raw/baseline"
export LD_PRELOAD="${WS}/install/lib/python3.13/site-packages/dftracer/lib64/libdftracer_preload.so"

# MPI / HDF5 settings
export MPICH_GPU_SUPPORT_ENABLED=0
export HDF5_USE_FILE_LOCKING=FALSE

# Run the application
cd "${FLASHX_DIR}"
./flashx
EOF
chmod +x production_run.sh

# 2. Submit the script via flux proxy — NO -x flags needed
# Use 48 processes per node (not 96) to avoid oversubscription issues
flux proxy <alloc_id> flux run -N <nnodes> -n $((<nnodes> * 48)) --exclusive ./production_run.sh

Why this works: The bash script runs inside the allocation where it sets its own environment. flux proxy only needs to forward the script execution; all DFTracer variables are established locally within the script.

Anti-pattern (DO NOT USE):

# WRONG — env vars are lost across the proxy boundary
export DFTRACER_ENABLE=1
flux proxy <id> flux run -N 8 -n 768 --exclusive -x DFTRACER_ENABLE ./flashx

When -x IS appropriate: For single-node runs or direct flux run (without flux proxy), -x is required to forward env vars to MPI ranks:

# OK — direct flux run on a single node, no proxy boundary
flux run -N 1 -n 4 -x DFTRACER_ENABLE -x DFTRACER_INIT -x LD_PRELOAD ./flashx

Lustre I/O Best Practices for Flash-X

Use a dedicated subdirectory per run: /p/lustre5/$USER/flashx/<run_name>/
Set HDF5_USE_FILE_LOCKING=FALSE to avoid Lustre file locking contention
For collective I/O at scale, set ROMIO_CB_WRITE=enable and CB_BUFFER_SIZE=16777216
Lustre stripe count should match or exceed the number of OSTs (typically 4-8 on Tuolumne)

Paper Search for Production Configuration (MANDATORY)

Before configuring any production-scale Flash-X run, search academic papers for the specific problem setup to find validated configurations. The Flash-X source tree contains parameter files, but they are often small test cases. Papers provide:

Validated problem sizes that produce meaningful I/O and runtime
AMR refinement parameters (lrefine_max, refine_cutoff, etc.)
Scaling studies that inform rank count and decomposition decisions
I/O patterns (checkpoint frequency, file sizes, collective vs independent)

How to search (Tool-First Rule):

Call the MCP tool first: mcp_dftracer2_session_search_papers_for_config with:
- app_name="Flash-X"
- problem_name="Sedov" (or whatever problem you are running)
- This searches arXiv + Semantic Scholar, extracts known parameter patterns, and persists results to session.json
Fallback: If the tool is unavailable, use mcp_dftracer2_search_papers_combined manually with queries like:
- "Flash-X Sedov AMR simulation configuration production HPC"
- "Flash-X checkpoint I/O performance optimization parallel HDF5"
- "FLASH AMR Sedov scaling study"
Also search the local paper library with mcp_dftracer2_session_search_local_papers
Read the full paper (arXiv PDF) to extract specific parameter values

Key paper found for Flash-X checkpoint/restart:

"Checkpoint/Restart for Lagrangian particle mesh with AMR in community code FLASH-X" — Jain et al., 2021, arXiv:2103.04267v1
Covers cross-mesh checkpoint-restart, AMReX and Paramesh formats, HDF5 I/O strong/weak scaling
Relevant for understanding checkpoint I/O patterns and expected file sizes

Correct Flash-X Grid Configuration (Paramesh AMR)

Critical discovery (2026-07-08): The nblockx, nblocky, nblockz parameters in flash.par control the initial number of blocks per direction in Paramesh AMR mode. These are NOT the same as iProcs/jProcs/kProcs (which control MPI decomposition).

For a large-scale production run with AMR:

# Initial block distribution (controls base problem size)
nblockx = 9
nblocky = 9
nblockz = 9
# Total initial blocks: 9³ = 729 blocks
# With NXB=8 (compile-time), each block is 8³ cells
# Total initial cells: 729 × 512 = 373,248 cells
# AMR will refine this up to lrefine_max levels

Reference configurations from Flash-X source:

flash.bgp.2048.par: nblockx/y/z=9, lrefine_max=7, nend=4, tmax=0.05
flash.bgp.4096.par: lrefine_max=7, lrefine_min=6, checkpointFileIntervalTime=0.03, wall_clock_time_limit=2700
flash.bgp_bench.4096.par: nblockx/y/z=9, lrefine_max=7, useCollectiveHDF5=.true.

Key insight: The 2048-rank and 4096-rank benchmark configs use nblockx/y/z=9 with relatively short runtimes (nend=4, tmax=0.05). For a 30+ minute production run, increase nend and tmax proportionally while keeping the same block structure.

Smoke Test vs Production Run

Aspect	Smoke Test	Production Run
Grid size	16³ (tiny)	nblockx/y/z=9 with AMR
MPI ranks	1	All nodes (8–768)
Runtime	< 5 seconds	≥ 30 minutes
I/O volume	< 1 MB	Multi-GB checkpoints
Purpose	Verify annotation/build	Measure optimization impact
Allocation	Any single node	User's active allocation

Never compare a smoke test against a production run. Always compare baseline vs optimization within the same run class (both smoke or both production).

Configuration Validation Checklist (MANDATORY before every production run)

The following checklist MUST be completed before submitting any production-scale Flash-X run. Missing any item will produce meaningless results (tiny checkpoints, short runtime, or outright failure).

Pre-Run Verification Steps

Verify binary was compiled with the expected NXB value
- Check the build log for compile flags: grep -E 'NXB|NYB|NZB' <build_log>
- Expected: -DNXB=8 -DNYB=8 -DNZB=8 (or -DNXB=32 if rebuilt)
- Pitfall: The Makefile may show NXB=32 but the actual binary was built with NXB=8. Always verify the build log, not just the Makefile.
Verify flash.par uses Paramesh AMR mode (NOT uniform grid)
- Paramesh AMR: iProcs=1, jProcs=1, kProcs=1 with explicit nblockx/y/z
- Uniform grid: iProcs×jProcs×kProcs = total_ranks, no explicit nblockx/y/z
- Why it matters: Uniform grid with default nblockx/y/z=1 produces ~140KB checkpoints. Paramesh AMR with nblockx/y/z=9 produces multi-GB checkpoints.
- Pitfall: The flash_production.par file was accidentally modified to use uniform grid mode after the run, which would fail or produce tiny checkpoints.
Verify checkpoint size expectations
- After the first checkpoint, check file size: ls -lh <lustre_out>/*chk_*
- Expected: ≥ 500MB per checkpoint for meaningful I/O tracing
- If checkpoints are < 10MB, the problem is too small — increase nblockx/y/z or lrefine_max
Verify runtime expectations
- After 5 minutes of wall time, check the log for step count: grep 'n=' sedov_production.log | tail -5
- Expected: ≥ 50 steps in first 5 minutes (AMR timesteps are small)
- If < 10 steps, the problem may be too small or CFL too restrictive
Verify DFTracer trace files are being generated
- Check trace directory: ls -lh <ws>/production_baseline/traces/raw/
- Expected: .pfw or .pfw.gz files growing in size during the run
- If no trace files, check LD_PRELOAD path and DFTRACER_ENABLE=1

Configuration Parameters Reference (Validated)

Based on Flash-X benchmark files (flash.bgp.2048.par, flash.bgp_bench.4096.par) and weak scaling I/O tests (sedov_io_*_32b_3d_weak.par):

Parameter	Benchmark Value	Production Value (384 ranks)	Notes
`nblockx`	9	9	Initial blocks in X (from benchmark)
`nblocky`	9	9	Initial blocks in Y (from benchmark)
`nblockz`	9	9	Initial blocks in Z (from benchmark)
`iProcs`	1	1	Paramesh AMR mode (always 1)
`jProcs`	1	1	Paramesh AMR mode (always 1)
`kProcs`	1	1	Paramesh AMR mode (always 1)
`lrefine_max`	7	6	Reduced from 7 to avoid memory pressure at 384 ranks
`lrefine_min`	—	4	Added to ensure minimum refinement
`sim_rInit`	—	0.013671875	Calibrated for NXB=8 (1 cell radius)
`checkpointFileIntervalTime`	0.03	0.03	From benchmark; ~16 checkpoints for tmax=0.5
`tmax`	0.05	0.5	Extended for 30+ min runtime
`nend`	4–10000	1000000	High enough that tmax or wall time stops first
`wall_clock_time_limit`	2700	3600	60 minutes for 30-minute app run
`useCollectiveHDF5`	.true.	.true.	Required for scale

Common Configuration Mistakes and Fixes

Mistake	Symptom	Fix
Uniform grid mode (iProcs>1) with default nblockx/y/z=1	Tiny checkpoints (~140KB), short runtime	Switch to Paramesh AMR: iProcs=jProcs=kProcs=1, nblockx/y/z=9
NXB mismatch (binary built with NXB=8, par file assumes NXB=32)	Incorrect cell sizes, possible crash	Verify build log, update sim_rInit to match actual NXB
lrefine_max too high for rank count	Out-of-memory crash	Reduce lrefine_max (e.g., 7→6 for 384 ranks)
checkpointFileIntervalTime too large	Few checkpoints, insufficient I/O data	Reduce to 0.03 (from benchmark)
tmax too small	Run finishes in < 5 minutes	Increase tmax to 0.5
Missing lrefine_min	Coarse regions may cause numerical issues	Add lrefine_min=4

Paper-Backed Configuration Discovery (Tool-First Rule)

Before configuring ANY production-scale Flash-X run, search for validated configurations in academic papers. The MCP tool mcp_dftracer2_session_search_papers_for_config should be called first. If unavailable, use these manual search queries:

arXiv / Semantic Scholar queries:

"Flash-X Sedov AMR simulation configuration production HPC"
"Flash-X checkpoint I/O performance optimization parallel HDF5"
"FLASH AMR Sedov scaling study"
"Flash-X weak scaling I/O benchmark"

GitHub repository search (Flash-X/Flash-X):

Search source/Simulation/SimulationMain/Sedov/extraParfiles/ for benchmark parameter files
Key files: flash.bgp.2048.par, flash.bgp_bench.4096.par, sedov_io_*_32b_3d_weak.par
These contain validated parameters from the Flash-X development team

Key paper:

"Checkpoint/Restart for Lagrangian particle mesh with AMR in community code FLASH-X" — Jain et al., 2021, arXiv:2103.04267v1
Covers checkpoint I/O patterns, AMReX and Paramesh formats, HDF5 scaling
Use this to understand expected checkpoint sizes and I/O patterns

Self-Learning Update Rule

After every production run, update this skill with:

Actual checkpoint sizes observed (verify expectations)
Actual runtime and step count (verify expectations)
Any configuration changes that were needed and why
New benchmark parameter files discovered in the Flash-X repo
Paper references that provided useful configuration guidance

Additional Lessons (2026-07-08)

session_configure incompatibility: The standard MCP session_configure tool fails on Flash-X because it's NOT a standard Python package. The tool attempts pip install -e but Flash-X's repository root lacks both setup.py and pyproject.toml.

Why it fails: Flash-X uses a custom Python-based setup script (./setup <Problem>) that generates a GNU Make build system, not a pip-installable package.

Correct procedure for Flash-X setup:
1. Initialize all git submodules: git submodule update --init --recursive
2. Run the Flash-X setup script: bash setup Sedov -auto -3d (generates object/ dir)
3. Customize object/Makefile.h with paths and compiler flags
4. Build with make -j <ncores> in the object/ directory
The documentation in SESSION_CONFIGURATION.md (generated 2026-07-08) has the full build procedure.
2026-07-08 (HDF5 setup fallback): Flash-X setup script accepts HDF5_PATH pointing to source-only directory (with no lib/ subdirectory built) and silently falls back to system HDF5 instead of failing or warning → bash setup Sedov -auto -3d with HDF5_PATH=/path/to/source generated Makefile.h that still tried to link against the source dir, but linker couldn't find libhdf5 and fell back to /lib64/libhdf5.so.103 (system HDF5 1.10.5) → binary runs but uses old HDF5 API → Fix for next build: Build + install HDF5 1.14.5 to hdf5_install/lib/ BEFORE running setup, or verify with test -d $HDF5_PATH/lib && test -f $HDF5_PATH/lib/libhdf5.so* before proceeding. If fallback is unavoidable, check actual library linked at runtime with ldd flashx | grep hdf5 and update documentation if system HDF5 is acceptable for the baseline (it is, for tracing purposes). → Common trigger (confirmed 2026-07-08): HDF5_PATH set to a SOURCE-ONLY directory (e.g. the hyphenated hdf5-1.14.5 unpack dir with no built lib//include/) — point HDF5_PATH at the BUILT/installed prefix (e.g. hdf5_1.14) instead. After a clean rebuild (make distclean && make -j), a correct link shows <WS>/hdf5_1.14/lib/libhdf5.so.310, never /lib64/libhdf5.so.103.
2026-07-08 (dftracer install on Tuolumne): Successfully installed dftracer develop with session-built HDF5 1.14.5 and Cray MPICH 9.0.1 (GNU 11.2 wrappers). HIP disabled (CPU-only workload). All libraries (libdftracer_preload.so, libdftracer_core.so) verified clean with ldd. Session HDF5 1.14.5 and Cray MPI correctly linked. Installation paths resolved: $DFTRACER_LIB_DIR=$PROJECT_ROOT/workspaces/flash_x/20260708_201403/install/lib/python3.13/site-packages/dftracer/lib64 (see artifacts/01_dftracer_install_verification.log for full details). NOTE: MPI is compatible on tuolumne — MPI-IO tracing should be enabled by passing the MPI version + headers; do not accept "auto-disabled/unsupported" (user-confirmed misdiagnosis).
2026-07-08 (setup wipes object/): bash setup Sedov -auto -3d REGENERATES the object/ build dir from scratch every time, wiping any hand-added files. → Fix: apply Makefile.h edits AND recreate any shim files (e.g. the dftracer dftracer_init_fini.c constructor/destructor shim, MACHOBJ += dftracer_init_fini.o) AFTER running setup, never before. If you re-run setup, re-apply them.
2026-07-08 (output paths are cwd-relative): Flash-X resolves basenm/output paths (checkpoints, plotfiles, sedov.dat) relative to the PROCESS cwd, not the workspace root. Under a job launcher the run cwd is object/. → Fix: the ds -> /p/lustre<N>/$USER/flashx output symlink must exist in the RUN cwd (object/), not only at the WS root. Create ds in object/ before running, or you get Fortran runtime error: Cannot open file 'ds/.../sedov.dat'. (Keep the flash.par 80-column limit in mind — use the short ds symlink for the output path.)
2026-07-08 (CRITICAL — -auto builds SERIAL HDF5; useCollectiveHDF5 is inert): bash setup Sedov -auto -3d selects INCLUDE IO/IOMain/hdf5/serial/PM (verify: grep IO/IOMain object/Units, and readlink -f object/io_h5file_interface.c → .../hdf5/serial/...). With the serial IO unit, ALL ranks gather to rank 0, which writes every checkpoint alone — setting useCollectiveHDF5 = .true. in flash.par does NOTHING, and ROMIO hints / Lustre striping cannot help because there is only one writer. → Diagnosis method: compute per-rank POSIX write BYTES (not write calls — every rank writes a few bytes to the log, so "384 ranks issue writes" is misleading). Measured baseline: top-1 rank = 91% of 11.84 GB; only 1 rank wrote >10 MB. → Fix: rebuild with the +parallelIO setup shortcut: bash setup Sedov -auto -3d +parallelIO (gives INCLUDE IO/IOMain/hdf5/parallel/PM). Remember setup wipes object/ — re-apply Makefile.h + the dftracer shim after. → Measured impact (Sedov 3D, nblockx=9, lrefine_max=2, 384 ranks / 8 nodes, 18 checkpoints, 6.7 GB, identical workload before/after): aggregate POSIX write time 399.0 s → 53.4 s (7.5×); critical-path (slowest-rank) write time 11.09 s → 6.80 s (1.63×); write syscalls 22,389,835 → 967,613 (23× fewer); avg write size 0.5 KB → 7.4 KB; bytes written 11.84 GB → 7.33 GB (serial path had write amplification); top-1 rank write share 91% → 52%. → Residual headroom after +parallelIO: avg write (7.4 KB) is still far below the 1 MB Lustre stripe and only ~2 ranks act as MPI-IO aggregators, so ROMIO collective-buffering hints (romio_cb_write=enable, cb_nodes=<nnodes>, cb_buffer_size) + HDF5 alignment are the correct NEXT lever — not the first one.
2026-07-08 (mechanism: serial IO unit hardcodes independent mode): IO/IOMain/hdf5/serial/io_h5file_interface.c contains int HDF5_MODE = 0; /* For serial HDF5 this should never become COLLECTIVE */. The parallel unit's io_h5file_interface.c instead sets HDF5_MODE = collectiveHDF5; at runtime from the useCollectiveHDF5 runtime parameter. So on an -auto (serial) build, useCollectiveHDF5=.true. is not merely ineffective — it is explicitly overridden to INDEPENDENT in C. Check with grep -rn "HDF5_MODE *=" source/IO/.

2026-07-08 (full I/O optimization ladder — measured, Sedov 3D, 384 ranks / 8 nodes, 18 checkpoints, ~6.7 GB, Lustre):

Run	Config	Critical-path write	Aggregators	Top-1 rank share	Bytes	Write calls
baseline	serial HDF5 (`-auto`)	11.09 s	0 (no >=1 MB writes)	91.0%	11.84 GB	22,389,835
opt1	`+parallelIO`	6.80 s	2	52.0%	7.33 GB	967,613
opt2	+ ROMIO `cb_nodes=8`	5.53 s	2	52.0%	7.33 GB	964,957
opt3	+ `cb_nodes=16`, `CRAY_CB_NODES_MULTIPLIER=2`, 16x4 MB stripes	1.45 s	16	6.8%	7.33 GB	990,894

End-to-end 7.6x on critical-path write time. Key ordering insight: L1 (+parallelIO) is a precondition — ROMIO hints (L2) and Lustre striping (L3) are near-no-ops while a single rank does all writing. cb_nodes alone was accepted-but-ignored by Cray MPICH (see [[software-mpi]]); only CRAY_CB_NODES_MULTIPLIER raised the real aggregator count, and the 4 MB stripe let each aggregated write grow 1.05 MB -> 3.76 MB (see [[software-hdf5]]). Beware averages: mean write size stayed ~7.4 KB across opt1-opt3 because ~957k tiny per-timestep log writes dominate the COUNT while contributing only 0.6% of BYTES. Bucket writes by size before drawing conclusions.

2026-07-08 (non-ASCII in flash.par silently drops the line): a line containing a non-ASCII character (e.g. an em-dash in run_comment = "... — ...") makes the Flash-X parser emit read : skipping the following line due to a syntax error: and IGNORE that parameter. Keep flash.par pure ASCII, and grep the run log for syntax error to make sure no parameter you care about was skipped.
2026-07-08 (flashx ignores a par-file argument): the binary ALWAYS reads flash.par from the process cwd. Passing a filename (./flashx flash_production.par) is silently ignored and the old flash.par is used — a 384-rank "production" launch silently re-ran the smoke config (symptom: output landed in the old basenm dir, Grid_init showed the old lrefine levels, 1 initial block instead of 729). → Fix: overwrite/symlink object/flash.par with the desired config; never pass it as argv. Verify after launch by grepping the run log for the expected basenm path and nblockx-consistent block count.
2026-07-08 (annotated smoke SUCCESS): FUNCTION-mode instrumentation works end-to-end. Annotated flashx (66 C IO files + init/fini shim) ran Sedov 3D single-rank and emitted a 6566-event trace: HDF5 5236, POSIX 696, C_APP 552, dftracer 43, STDIO 36, MPI 3. No PRELOAD pivot needed. ldd shows session HDF5 1.14.5 (libhdf5.so.310) + libdftracer_core.so.4.1.0 (RPATH) + cray-mpich gnu/11.2.

name	workload-flashx
description	Flash-X-specific knowledge for the dftracer pipeline — build system (Python setup + GNU Make), Sedov 3D test problem, dangling symlinks in shallow clones, HDF5/flash.par pitfalls. Load this skill whenever working with Flash-X.

Flash-X workload notes

Flash-X (git@github.com:Flash-X/Flash-X.git) is a Fortran/C++/C multiphysics AMR code built with its own Python setup script + GNU Make (NOT cmake/autotools).

Build system

Top-level ./setup <Problem> -auto -<dim> (e.g. ./setup Sedov -auto -3d) generates an object/ build dir; then make in that dir.
Machine config lives under sites/; Makefile.h picks compilers/HDF5.
Point HDF5 at a source-built install in the session workspace, never the Cray/system HDF5 module. See [[software-hdf5]] and [[feedback_always_source_hdf5]].

Sedov 3D test problem

source/Simulation/SimulationMain/Sedov/ — flash.par + tests/*.par variants.
Prior config: FUNCTION + DATA_DIR=all tracing, ~768 ranks, wall ≥ 30 min.

Instrumentation strategy (Fortran-heavy code)

Pitfalls (dated lessons: symptom → root cause → fix)

2026-07-07: session_create crashed with FileNotFoundError on source/physics/sourceTerms/Stir/StirMain/TurbGen.h → Flash-X ships dangling symlinks (targets not present in a --depth 1 clone) and shutil.copytree dereferenced them → fix: copy with symlinks=True, ignore_dangling_symlinks=True (done in mcp_tools/tools/session/session_tools.py + siblings). Restart the MCP server after the fix.
flash.par 80-column pitfall: long absolute output paths get silently truncated → keep a short ds symlink to the Lustre output dir and reference that in flash.par instead of the full path.
Traces must land in <WS>/traces/ (workspace), NOT the Lustre output dir — set DFTRACER_LOG_FILE to the workspace explicitly. See [[feedback_optimization_pipeline_traces]].
2026-07-08 (build): Cray PE ftn/craycc FAILED to build Flash-X (Fortran flag incompatibilities) → use the GNU 11.2 MPI wrappers at /opt/cray/pe/mpich/9.0.1/ofi/gnu/11.2/bin/{mpif90,mpicc,mpicxx} instead. Set MPI_PATH=/opt/cray/pe/mpich/9.0.1/ofi/gnu/11.2 and HDF5_PATH=<WS>/hdf5_1.14 in sites/Prototypes/Linux/Makefile.h.
2026-07-08 (build): gfortran strict checking vs MPI Fortran module interfaces → add -fallow-argument-mismatch to FFLAGS or the build fails on MPI type mismatches. Working Sedov 3D build: ./setup Sedov -auto -3d then make -j in object/; exe is object/flashx. LD_LIBRARY_PATH must include CCE libs + /usr/lib64 at link time.
2026-07-08 (annotation): Flash-X is Fortran-heavy (~2600 .F90 files) with C/C++ IO layer. Fortran entry point program Flashx in source/Simulation/main.F90 has no C main() for DFTRACER_C_INIT/FINI → create a C wrapper file object/dftracer_init_fini.c with __attribute__((constructor)) and __attribute__((destructor)) to auto-call DFTRACER_C_INIT/DFTRACER_C_FINI. Add the .o to ALL_OBJ_FILES in object/Makefile and ensure it links. See [[dftracer-annotate-general]] for the exact wrapper pattern.
2026-07-08 (annotation): CCE Fortran linker (crayftn) may not fire constructor/destructor attributes reliably → if FUNCTION mode produces no traces despite wrapper being linked, pivot to PRELOAD mode immediately. PRELOAD mode captures HDF5/POSIX I/O at the library level without requiring source annotations to work. Set DFTRACER_INIT=PRELOAD, DFTRACER_DATA_DIR=all, and use LD_PRELOAD=<path>/libdftracer_core.so.4.1.0.
2026-07-08 (runtime): CCE runtime libraries must be in LD_LIBRARY_PATH: /opt/cray/pe/cce/20.0.0/cce/x86_64/lib — without this, the binary fails to find libcraymp.so and other CCE runtime deps at runtime even though it links.
2026-07-08 (runtime): module load inside a bash script submitted via flux proxy HUNG indefinitely — Lmod re-loading already-loaded modules in a Flux allocation causes a deadlock in the Lua module interpreter. The script showed 768 bash processes all stuck on /usr/bin/lua /usr/share/lmod/lmod/libexec/lmod shell load cray-mpich/9.0.1. Fix: Do NOT load modules inside the bash script when running under flux proxy — the allocation already has the correct modules loaded. Verify with module list inside the script if needed, but never reload.
2026-07-08 (trace analysis): Flash-X Sedov 3D I/O pattern — primary bottleneck is io_h5write_unknowns_ (32% of I/O time), secondary is the xfer pipeline (io_xfer_cont_slab → io_h5_xfer_wrapper → io_h5_xfer → io_h5_type_matched_xfer) at 26.6%. Attribute creation (io_h5_attribute_create, 156 calls) is 9.6%. Optimization: increase checkpointFileIntervalTime (default 0.01 → 0.05), reduce plot_var_N count, enable HDF5 collective I/O.

Build Session 2026-07-08: Flash-X Sedov 3D Baseline

Successfully built Flash-X Sedov 3D baseline executable on Tuolumne.

Steps:

Built HDF5 1.14.3 from source (curl from HDF5 FTP mirror) into workspace
Patched HDF5 header (H5Apublic.h line 932: chid_t → hid_t)
Initialized PARAMESH submodule before setup
Ran setup with HDF5_PATH env var: HDF5_PATH=<WS>/hdf5_1.14 ./setup Sedov -auto -3d
Updated object/Makefile.h HDF5_PATH to workspace
Built with make -j4 in object dir

Result:

Executable: <WS>/baseline/source/object/flashx (6.6M, dynamically linked)
Exit code: 0 (success)
Requires LD_LIBRARY_PATH to include <WS>/hdf5_1.14/lib at runtime

Critical lessons:

PARAMESH submodule MUST be initialized before setup or it fails
HDF5_PATH env var is honored by setup script to override Makefile.h defaults
GNU 11.2 MPI wrappers are used (auto-detected, working correctly)
No code errors, build completed successfully on first attempt after setup

Large-Scale Production Run Configuration

MANDATORY: Every baseline and optimization iteration must run on the user's active allocation with ALL nodes, using Lustre for I/O.

Problem Size Requirements

To produce meaningful optimization results, the problem must be large enough to:

Use ~50% of node memory (~250 GB per node on Tuolumne)
Run for at least 30 minutes (to amortize startup overhead)
Generate substantial I/O (checkpoint files should be multi-GB)

Flash-X Grid Sizing Formula

Flash-X memory per cell ≈ 200 bytes (conservative estimate for Sedov 3D with AMR). For 8 nodes × 250 GB target = 2 TB total:

Total cells needed: 2 TB / 200 B ≈ 10 billion cells
Uniform grid: cube_root(10B) ≈ 2150³
With AMR (lrefine_max=6, typical 2-4× refinement): base grid ~ 512³ to 1024³

Recommended large-scale config for 8 nodes:

# Grid parameters (uniform base grid, AMR refines up to lrefine_max)
iProcs = 8          # 8 MPI ranks in X (1 per node)
jProcs = 1
kProcs = 1
# OR for better decomposition:
iProcs = 2
jProcs = 2
kProcs = 2

# With AMR, effective resolution can be much higher
lrefine_max = 6

# I/O parameters — frequent checkpoints to generate I/O load
checkpointFileIntervalTime = 0.05   # checkpoint every 0.05 time units
checkpointFileIntervalStep = 0
nend = 100000
tmax = 0.5                          # longer runtime

# Output to Lustre
basenm = "$LUSTRE_ROOT/flashx/sedov_"

Allocation-Aware Run Rules

ALWAYS ask the user for their active allocation ID before any large run.
Use ALL nodes in the allocation (flux run -N <nnodes> -n <ntasks> --exclusive).
Route I/O to Lustre — set basenm in flash.par to a path under /p/lustre5/$USER/.
Create the Lustre output directory before running (mkdir -p /p/lustre5/$USER/flashx).
Verify the allocation is still active with flux jobs before submitting.
Wall time: request at least 60 minutes for a 30-minute app run (dftracer overhead + safety margin).

Flux Proxy Run Pattern (MANDATORY)

# 1. Create a run script that exports ALL env vars internally
# NOTE: Do NOT load modules inside the script — the Flux allocation already has
# the correct modules loaded. Re-loading modules via Lmod inside a flux proxy
# job causes a deadlock in the Lua interpreter.
cat > production_run.sh << 'EOF'
#!/bin/bash
set -e

# Environment
export PATH="$PROJECT_ROOT/.venv/bin:$PATH"
export LD_LIBRARY_PATH="${WS}/hdf5_1.14/lib:${WS}/install/lib/python3.13/site-packages/dftracer/lib64:/opt/cray/pe/cce/20.0.0/cce/x86_64/lib:$LD_LIBRARY_PATH"

# DFTracer setup
export DFTRACER_ENABLE=1
export DFTRACER_INIT=PRELOAD
export DFTRACER_DATA_DIR=all
export DFTRACER_INC_METADATA=1
export DFTRACER_LOG_FILE="${WS}/traces/raw/baseline"
export LD_PRELOAD="${WS}/install/lib/python3.13/site-packages/dftracer/lib64/libdftracer_preload.so"

# MPI / HDF5 settings
export MPICH_GPU_SUPPORT_ENABLED=0
export HDF5_USE_FILE_LOCKING=FALSE

# Run the application
cd "${FLASHX_DIR}"
./flashx
EOF
chmod +x production_run.sh

# 2. Submit the script via flux proxy — NO -x flags needed
# Use 48 processes per node (not 96) to avoid oversubscription issues
flux proxy <alloc_id> flux run -N <nnodes> -n $((<nnodes> * 48)) --exclusive ./production_run.sh

Anti-pattern (DO NOT USE):

# WRONG — env vars are lost across the proxy boundary
export DFTRACER_ENABLE=1
flux proxy <id> flux run -N 8 -n 768 --exclusive -x DFTRACER_ENABLE ./flashx

When -x IS appropriate: For single-node runs or direct flux run (without flux proxy), -x is required to forward env vars to MPI ranks:

# OK — direct flux run on a single node, no proxy boundary
flux run -N 1 -n 4 -x DFTRACER_ENABLE -x DFTRACER_INIT -x LD_PRELOAD ./flashx

Lustre I/O Best Practices for Flash-X

Use a dedicated subdirectory per run: /p/lustre5/$USER/flashx/<run_name>/
Set HDF5_USE_FILE_LOCKING=FALSE to avoid Lustre file locking contention
For collective I/O at scale, set ROMIO_CB_WRITE=enable and CB_BUFFER_SIZE=16777216
Lustre stripe count should match or exceed the number of OSTs (typically 4-8 on Tuolumne)

Paper Search for Production Configuration (MANDATORY)

Validated problem sizes that produce meaningful I/O and runtime
AMR refinement parameters (lrefine_max, refine_cutoff, etc.)
Scaling studies that inform rank count and decomposition decisions
I/O patterns (checkpoint frequency, file sizes, collective vs independent)

How to search (Tool-First Rule):

Call the MCP tool first: mcp_dftracer2_session_search_papers_for_config with:
- app_name="Flash-X"
- problem_name="Sedov" (or whatever problem you are running)
- This searches arXiv + Semantic Scholar, extracts known parameter patterns, and persists results to session.json
Fallback: If the tool is unavailable, use mcp_dftracer2_search_papers_combined manually with queries like:
- "Flash-X Sedov AMR simulation configuration production HPC"
- "Flash-X checkpoint I/O performance optimization parallel HDF5"
- "FLASH AMR Sedov scaling study"
Also search the local paper library with mcp_dftracer2_session_search_local_papers
Read the full paper (arXiv PDF) to extract specific parameter values

Key paper found for Flash-X checkpoint/restart:

"Checkpoint/Restart for Lagrangian particle mesh with AMR in community code FLASH-X" — Jain et al., 2021, arXiv:2103.04267v1
Covers cross-mesh checkpoint-restart, AMReX and Paramesh formats, HDF5 I/O strong/weak scaling
Relevant for understanding checkpoint I/O patterns and expected file sizes

Correct Flash-X Grid Configuration (Paramesh AMR)

For a large-scale production run with AMR:

# Initial block distribution (controls base problem size)
nblockx = 9
nblocky = 9
nblockz = 9
# Total initial blocks: 9³ = 729 blocks
# With NXB=8 (compile-time), each block is 8³ cells
# Total initial cells: 729 × 512 = 373,248 cells
# AMR will refine this up to lrefine_max levels

Reference configurations from Flash-X source:

flash.bgp.2048.par: nblockx/y/z=9, lrefine_max=7, nend=4, tmax=0.05
flash.bgp.4096.par: lrefine_max=7, lrefine_min=6, checkpointFileIntervalTime=0.03, wall_clock_time_limit=2700
flash.bgp_bench.4096.par: nblockx/y/z=9, lrefine_max=7, useCollectiveHDF5=.true.

Smoke Test vs Production Run

Aspect	Smoke Test	Production Run
Grid size	16³ (tiny)	nblockx/y/z=9 with AMR
MPI ranks	1	All nodes (8–768)
Runtime	< 5 seconds	≥ 30 minutes
I/O volume	< 1 MB	Multi-GB checkpoints
Purpose	Verify annotation/build	Measure optimization impact
Allocation	Any single node	User's active allocation

Never compare a smoke test against a production run. Always compare baseline vs optimization within the same run class (both smoke or both production).

Configuration Validation Checklist (MANDATORY before every production run)

The following checklist MUST be completed before submitting any production-scale Flash-X run. Missing any item will produce meaningless results (tiny checkpoints, short runtime, or outright failure).

Pre-Run Verification Steps

Verify binary was compiled with the expected NXB value
- Check the build log for compile flags: grep -E 'NXB|NYB|NZB' <build_log>
- Expected: -DNXB=8 -DNYB=8 -DNZB=8 (or -DNXB=32 if rebuilt)
- Pitfall: The Makefile may show NXB=32 but the actual binary was built with NXB=8. Always verify the build log, not just the Makefile.
Verify flash.par uses Paramesh AMR mode (NOT uniform grid)
- Paramesh AMR: iProcs=1, jProcs=1, kProcs=1 with explicit nblockx/y/z
- Uniform grid: iProcs×jProcs×kProcs = total_ranks, no explicit nblockx/y/z
- Why it matters: Uniform grid with default nblockx/y/z=1 produces ~140KB checkpoints. Paramesh AMR with nblockx/y/z=9 produces multi-GB checkpoints.
- Pitfall: The flash_production.par file was accidentally modified to use uniform grid mode after the run, which would fail or produce tiny checkpoints.
Verify checkpoint size expectations
- After the first checkpoint, check file size: ls -lh <lustre_out>/*chk_*
- Expected: ≥ 500MB per checkpoint for meaningful I/O tracing
- If checkpoints are < 10MB, the problem is too small — increase nblockx/y/z or lrefine_max
Verify runtime expectations
- After 5 minutes of wall time, check the log for step count: grep 'n=' sedov_production.log | tail -5
- Expected: ≥ 50 steps in first 5 minutes (AMR timesteps are small)
- If < 10 steps, the problem may be too small or CFL too restrictive
Verify DFTracer trace files are being generated
- Check trace directory: ls -lh <ws>/production_baseline/traces/raw/
- Expected: .pfw or .pfw.gz files growing in size during the run
- If no trace files, check LD_PRELOAD path and DFTRACER_ENABLE=1

Configuration Parameters Reference (Validated)

Based on Flash-X benchmark files (flash.bgp.2048.par, flash.bgp_bench.4096.par) and weak scaling I/O tests (sedov_io_*_32b_3d_weak.par):

Parameter	Benchmark Value	Production Value (384 ranks)	Notes
`nblockx`	9	9	Initial blocks in X (from benchmark)
`nblocky`	9	9	Initial blocks in Y (from benchmark)
`nblockz`	9	9	Initial blocks in Z (from benchmark)
`iProcs`	1	1	Paramesh AMR mode (always 1)
`jProcs`	1	1	Paramesh AMR mode (always 1)
`kProcs`	1	1	Paramesh AMR mode (always 1)
`lrefine_max`	7	6	Reduced from 7 to avoid memory pressure at 384 ranks
`lrefine_min`	—	4	Added to ensure minimum refinement
`sim_rInit`	—	0.013671875	Calibrated for NXB=8 (1 cell radius)
`checkpointFileIntervalTime`	0.03	0.03	From benchmark; ~16 checkpoints for tmax=0.5
`tmax`	0.05	0.5	Extended for 30+ min runtime
`nend`	4–10000	1000000	High enough that tmax or wall time stops first
`wall_clock_time_limit`	2700	3600	60 minutes for 30-minute app run
`useCollectiveHDF5`	.true.	.true.	Required for scale

Common Configuration Mistakes and Fixes

Mistake	Symptom	Fix
Uniform grid mode (iProcs>1) with default nblockx/y/z=1	Tiny checkpoints (~140KB), short runtime	Switch to Paramesh AMR: iProcs=jProcs=kProcs=1, nblockx/y/z=9
NXB mismatch (binary built with NXB=8, par file assumes NXB=32)	Incorrect cell sizes, possible crash	Verify build log, update sim_rInit to match actual NXB
lrefine_max too high for rank count	Out-of-memory crash	Reduce lrefine_max (e.g., 7→6 for 384 ranks)
checkpointFileIntervalTime too large	Few checkpoints, insufficient I/O data	Reduce to 0.03 (from benchmark)
tmax too small	Run finishes in < 5 minutes	Increase tmax to 0.5
Missing lrefine_min	Coarse regions may cause numerical issues	Add lrefine_min=4

Paper-Backed Configuration Discovery (Tool-First Rule)

arXiv / Semantic Scholar queries:

"Flash-X Sedov AMR simulation configuration production HPC"
"Flash-X checkpoint I/O performance optimization parallel HDF5"
"FLASH AMR Sedov scaling study"
"Flash-X weak scaling I/O benchmark"

GitHub repository search (Flash-X/Flash-X):

Search source/Simulation/SimulationMain/Sedov/extraParfiles/ for benchmark parameter files
Key files: flash.bgp.2048.par, flash.bgp_bench.4096.par, sedov_io_*_32b_3d_weak.par
These contain validated parameters from the Flash-X development team

Key paper:

"Checkpoint/Restart for Lagrangian particle mesh with AMR in community code FLASH-X" — Jain et al., 2021, arXiv:2103.04267v1
Covers checkpoint I/O patterns, AMReX and Paramesh formats, HDF5 scaling
Use this to understand expected checkpoint sizes and I/O patterns

Self-Learning Update Rule

After every production run, update this skill with:

Actual checkpoint sizes observed (verify expectations)
Actual runtime and step count (verify expectations)
Any configuration changes that were needed and why
New benchmark parameter files discovered in the Flash-X repo
Paper references that provided useful configuration guidance

Additional Lessons (2026-07-08)

session_configure incompatibility: The standard MCP session_configure tool fails on Flash-X because it's NOT a standard Python package. The tool attempts pip install -e but Flash-X's repository root lacks both setup.py and pyproject.toml.

Why it fails: Flash-X uses a custom Python-based setup script (./setup <Problem>) that generates a GNU Make build system, not a pip-installable package.

Correct procedure for Flash-X setup:
1. Initialize all git submodules: git submodule update --init --recursive
2. Run the Flash-X setup script: bash setup Sedov -auto -3d (generates object/ dir)
3. Customize object/Makefile.h with paths and compiler flags
4. Build with make -j <ncores> in the object/ directory
The documentation in SESSION_CONFIGURATION.md (generated 2026-07-08) has the full build procedure.
2026-07-08 (HDF5 setup fallback): Flash-X setup script accepts HDF5_PATH pointing to source-only directory (with no lib/ subdirectory built) and silently falls back to system HDF5 instead of failing or warning → bash setup Sedov -auto -3d with HDF5_PATH=/path/to/source generated Makefile.h that still tried to link against the source dir, but linker couldn't find libhdf5 and fell back to /lib64/libhdf5.so.103 (system HDF5 1.10.5) → binary runs but uses old HDF5 API → Fix for next build: Build + install HDF5 1.14.5 to hdf5_install/lib/ BEFORE running setup, or verify with test -d $HDF5_PATH/lib && test -f $HDF5_PATH/lib/libhdf5.so* before proceeding. If fallback is unavoidable, check actual library linked at runtime with ldd flashx | grep hdf5 and update documentation if system HDF5 is acceptable for the baseline (it is, for tracing purposes). → Common trigger (confirmed 2026-07-08): HDF5_PATH set to a SOURCE-ONLY directory (e.g. the hyphenated hdf5-1.14.5 unpack dir with no built lib//include/) — point HDF5_PATH at the BUILT/installed prefix (e.g. hdf5_1.14) instead. After a clean rebuild (make distclean && make -j), a correct link shows <WS>/hdf5_1.14/lib/libhdf5.so.310, never /lib64/libhdf5.so.103.
2026-07-08 (dftracer install on Tuolumne): Successfully installed dftracer develop with session-built HDF5 1.14.5 and Cray MPICH 9.0.1 (GNU 11.2 wrappers). HIP disabled (CPU-only workload). All libraries (libdftracer_preload.so, libdftracer_core.so) verified clean with ldd. Session HDF5 1.14.5 and Cray MPI correctly linked. Installation paths resolved: $DFTRACER_LIB_DIR=$PROJECT_ROOT/workspaces/flash_x/20260708_201403/install/lib/python3.13/site-packages/dftracer/lib64 (see artifacts/01_dftracer_install_verification.log for full details). NOTE: MPI is compatible on tuolumne — MPI-IO tracing should be enabled by passing the MPI version + headers; do not accept "auto-disabled/unsupported" (user-confirmed misdiagnosis).
2026-07-08 (setup wipes object/): bash setup Sedov -auto -3d REGENERATES the object/ build dir from scratch every time, wiping any hand-added files. → Fix: apply Makefile.h edits AND recreate any shim files (e.g. the dftracer dftracer_init_fini.c constructor/destructor shim, MACHOBJ += dftracer_init_fini.o) AFTER running setup, never before. If you re-run setup, re-apply them.
2026-07-08 (output paths are cwd-relative): Flash-X resolves basenm/output paths (checkpoints, plotfiles, sedov.dat) relative to the PROCESS cwd, not the workspace root. Under a job launcher the run cwd is object/. → Fix: the ds -> /p/lustre<N>/$USER/flashx output symlink must exist in the RUN cwd (object/), not only at the WS root. Create ds in object/ before running, or you get Fortran runtime error: Cannot open file 'ds/.../sedov.dat'. (Keep the flash.par 80-column limit in mind — use the short ds symlink for the output path.)
2026-07-08 (CRITICAL — -auto builds SERIAL HDF5; useCollectiveHDF5 is inert): bash setup Sedov -auto -3d selects INCLUDE IO/IOMain/hdf5/serial/PM (verify: grep IO/IOMain object/Units, and readlink -f object/io_h5file_interface.c → .../hdf5/serial/...). With the serial IO unit, ALL ranks gather to rank 0, which writes every checkpoint alone — setting useCollectiveHDF5 = .true. in flash.par does NOTHING, and ROMIO hints / Lustre striping cannot help because there is only one writer. → Diagnosis method: compute per-rank POSIX write BYTES (not write calls — every rank writes a few bytes to the log, so "384 ranks issue writes" is misleading). Measured baseline: top-1 rank = 91% of 11.84 GB; only 1 rank wrote >10 MB. → Fix: rebuild with the +parallelIO setup shortcut: bash setup Sedov -auto -3d +parallelIO (gives INCLUDE IO/IOMain/hdf5/parallel/PM). Remember setup wipes object/ — re-apply Makefile.h + the dftracer shim after. → Measured impact (Sedov 3D, nblockx=9, lrefine_max=2, 384 ranks / 8 nodes, 18 checkpoints, 6.7 GB, identical workload before/after): aggregate POSIX write time 399.0 s → 53.4 s (7.5×); critical-path (slowest-rank) write time 11.09 s → 6.80 s (1.63×); write syscalls 22,389,835 → 967,613 (23× fewer); avg write size 0.5 KB → 7.4 KB; bytes written 11.84 GB → 7.33 GB (serial path had write amplification); top-1 rank write share 91% → 52%. → Residual headroom after +parallelIO: avg write (7.4 KB) is still far below the 1 MB Lustre stripe and only ~2 ranks act as MPI-IO aggregators, so ROMIO collective-buffering hints (romio_cb_write=enable, cb_nodes=<nnodes>, cb_buffer_size) + HDF5 alignment are the correct NEXT lever — not the first one.
2026-07-08 (mechanism: serial IO unit hardcodes independent mode): IO/IOMain/hdf5/serial/io_h5file_interface.c contains int HDF5_MODE = 0; /* For serial HDF5 this should never become COLLECTIVE */. The parallel unit's io_h5file_interface.c instead sets HDF5_MODE = collectiveHDF5; at runtime from the useCollectiveHDF5 runtime parameter. So on an -auto (serial) build, useCollectiveHDF5=.true. is not merely ineffective — it is explicitly overridden to INDEPENDENT in C. Check with grep -rn "HDF5_MODE *=" source/IO/.

2026-07-08 (full I/O optimization ladder — measured, Sedov 3D, 384 ranks / 8 nodes, 18 checkpoints, ~6.7 GB, Lustre):

Run	Config	Critical-path write	Aggregators	Top-1 rank share	Bytes	Write calls
baseline	serial HDF5 (`-auto`)	11.09 s	0 (no >=1 MB writes)	91.0%	11.84 GB	22,389,835
opt1	`+parallelIO`	6.80 s	2	52.0%	7.33 GB	967,613
opt2	+ ROMIO `cb_nodes=8`	5.53 s	2	52.0%	7.33 GB	964,957
opt3	+ `cb_nodes=16`, `CRAY_CB_NODES_MULTIPLIER=2`, 16x4 MB stripes	1.45 s	16	6.8%	7.33 GB	990,894

2026-07-08 (non-ASCII in flash.par silently drops the line): a line containing a non-ASCII character (e.g. an em-dash in run_comment = "... — ...") makes the Flash-X parser emit read : skipping the following line due to a syntax error: and IGNORE that parameter. Keep flash.par pure ASCII, and grep the run log for syntax error to make sure no parameter you care about was skipped.
2026-07-08 (flashx ignores a par-file argument): the binary ALWAYS reads flash.par from the process cwd. Passing a filename (./flashx flash_production.par) is silently ignored and the old flash.par is used — a 384-rank "production" launch silently re-ran the smoke config (symptom: output landed in the old basenm dir, Grid_init showed the old lrefine levels, 1 initial block instead of 729). → Fix: overwrite/symlink object/flash.par with the desired config; never pass it as argv. Verify after launch by grepping the run log for the expected basenm path and nblockx-consistent block count.
2026-07-08 (annotated smoke SUCCESS): FUNCTION-mode instrumentation works end-to-end. Annotated flashx (66 C IO files + init/fini shim) ran Sedov 3D single-rank and emitted a 6566-event trace: HDF5 5236, POSIX 696, C_APP 552, dftracer 43, STDIO 36, MPI 3. No PRELOAD pivot needed. ldd shows session HDF5 1.14.5 (libhdf5.so.310) + libdftracer_core.so.4.1.0 (RPATH) + cray-mpich gnu/11.2.

workload-flashx

More from this repository

More from this repository

Flash-X workload notes

Build system

Sedov 3D test problem

Instrumentation strategy (Fortran-heavy code)

Pitfalls (dated lessons: symptom → root cause → fix)

Build Session 2026-07-08: Flash-X Sedov 3D Baseline

Large-Scale Production Run Configuration

Problem Size Requirements

Flash-X Grid Sizing Formula

Allocation-Aware Run Rules

Flux Proxy Run Pattern (MANDATORY)

Lustre I/O Best Practices for Flash-X

Paper Search for Production Configuration (MANDATORY)

Correct Flash-X Grid Configuration (Paramesh AMR)

Smoke Test vs Production Run

Configuration Validation Checklist (MANDATORY before every production run)

Pre-Run Verification Steps

Configuration Parameters Reference (Validated)

Common Configuration Mistakes and Fixes

Paper-Backed Configuration Discovery (Tool-First Rule)

Self-Learning Update Rule

Additional Lessons (2026-07-08)

Flash-X workload notes

Build system

Sedov 3D test problem

Instrumentation strategy (Fortran-heavy code)

Pitfalls (dated lessons: symptom → root cause → fix)

Build Session 2026-07-08: Flash-X Sedov 3D Baseline

Large-Scale Production Run Configuration

Problem Size Requirements

Flash-X Grid Sizing Formula

Allocation-Aware Run Rules

Flux Proxy Run Pattern (MANDATORY)

Lustre I/O Best Practices for Flash-X

Paper Search for Production Configuration (MANDATORY)

Correct Flash-X Grid Configuration (Paramesh AMR)

Smoke Test vs Production Run

Configuration Validation Checklist (MANDATORY before every production run)

Pre-Run Verification Steps

Configuration Parameters Reference (Validated)

Common Configuration Mistakes and Fixes

Paper-Backed Configuration Discovery (Tool-First Rule)

Self-Learning Update Rule

Additional Lessons (2026-07-08)