digital-twin-universe

name	digital-twin-universe
description	Use when the user needs an isolated, realistic deployment environment to test code beyond "tests pass on my machine." Covers launching environments from declarative profiles, executing commands inside them, managing their lifecycle, debugging networking or provisioning issues, and working with Incus containers. Also use when the user wants to simulate an end-user experience (e.g. Amplifier CLI, web UIs) without touching production infrastructure. Triggers on digital twin, DTU, isolated environment, simulation environment, amplifier-digital-twin, incus container, profile launch, test in realistic environment, deploy simulation. ALWAYS use this skill whenever a "Digital Twin" is mentioned!
user-invocable	true

Digital Twin Universe Environments

amplifier-digital-twin is a CLI for on-demand, isolated environments launched from declarative profiles. Environments can be updated in-place (pull fresh code, reinstall) without destroying and relaunching. All commands output JSON to stdout.

Prerequisites Check

Before any DTU operation, verify the environment:

# 1. Double check the CLI is installed
which amplifier-digital-twin

# 2. Is Incus available and running?
which incus && incus version && echo "Incus OK" || echo "Incus NOT available"

If amplifier-digital-twin is not found:

uv tool install git+https://github.com/microsoft/amplifier-bundle-digital-twin-universe@main

Installing Incus

If the user doesn't have Incus installed, walk them through the platform-specific steps in the install guide. Present sudo commands to the user one at a time. If their system is not in the documentation, go to the actual documentation at https://linuxcontainers.org/incus/docs/main/installing/

read_file("@digital-twin-universe:docs/installing-incus.md")

After the user completes the install steps, run the verification commands yourself (incus version, launch a test container, exec into it, delete it). Report results to the user rather than asking them to run verification.

Installing Docker

Docker is only needed for profiles that use Gitea repos or mock service sidecars. Check if it's already installed with docker version. You should encourage the user to install Docker since some circumstances will require it. If it's not installed, walk the user through the install guide:

read_file("@digital-twin-universe:docs/installing-docker.md")

After installing, make sure to test to see if its working as expected.

If prerequisites are missing, report clearly and stop. Do not attempt workarounds.

When to Use Gitea with a Digital Twin

The Gitea bundle is included as a dependency of this bundle. Use Gitea whenever the project has local repos that need to be tested as if they were already published on GitHub. Gitea serves it locally so the Digital Twin can consume it without pushing to origin.

Common scenarios:

• Verifying that unpublished code installs and runs correctly in isolation as if they were published to GitHub or PyPI
• Amplifier specific: Testing local changes to a bundle, module, or app before pushing

NEVER push changes to upstream just to make them available inside a Digital Twin. Clone the local repos into Gitea first, then reference those in the profile via url_rewrites or pypi_overrides. Load the gitea skill for full CLI usage.

If the use case warrants it, you should FIRST load the gitea skill and setup the environment for the user.

Use the correct Gitea URL/endpoint for the system. When the profile uses url_rewrites or pypi_overrides, pass the Gitea endpoint via --var GITEA_URL=... (and --var GITEA_TOKEN=...). The right value depends on where the DTU host and the Gitea container can reach each other.

Documentation

You must load these files and refer to them as they contain necessary information on how to use the digital twin universe correctly.

For overview, quick start, installation, and feature list:

read_file("@digital-twin-universe:README.md")

For complete CLI reference with all flags and output schemas:

read_file("@digital-twin-universe:docs/api-reference.md")

For the full profile schema and field reference, sample profiles organized by bucket (amplifier/, patterns/, tests/, community/), and contribution guidelines:

read_file("@digital-twin-universe:docs/profiles.md")

For building mock services (Docker sidecars with domain interception) and discovering community-published mocks:

read_file("@digital-twin-universe:docs/mock-authoring.md")

For running Docker inside a Digital Twin Universe environment (nested containers), including platform-specific setup and troubleshooting:

read_file("@digital-twin-universe:docs/docker-in-incus.md")

Shell Access

When giving the user a command for an interactive shell in a DTU for a user (without explicit flag preferences), default to giving them a command with the default visual-id so they know that they are in a DTU:

amplifier-digital-twin exec --visual-id "" <id>

--visual-id "" (the empty string sentinel) prepends (dtu:<profile>) in blue to the prompt so the user can tell which DTU they are in. If the user has several DTUs on the same profile, pass an explicit label so the prompts remain distinct:

amplifier-digital-twin exec --visual-id testing-pr-42 <id>

Important: --visual-id always takes a value. The empty string "" means "use the profile name"; any non-empty value is used as the literal label. Always quote the empty string -- --visual-id "".

Running Commands in a DTU

Every command path (exec, exec --stream, provision.setup_cmds, provision.update.cmds, readiness.command, bare interactive) is wrapped in bash -lc. The login shell sources /etc/profile.d/dtu-env.sh, which puts /root/.cargo/bin:/root/.local/bin on PATH and exports passthrough env vars.

Write commands bare. Anything from uv tool install (amplifier, uv, etc.) resolves without help:

amplifier-digital-twin exec <id> -- amplifier --version

Do NOT add any of the following — all redundant, all dead weight from older profiles:

• bash -lc '...' wrapping (double-wraps).
• bash -c 'export PATH="/root/.local/bin:$PATH" && cmd'.
• PATH=/root/.local/bin:$PATH cmd prefix on readiness.command.
• Hardcoded /root/.local/bin/<tool> paths — use bare commands or command -v <tool> for existence checks.
• export PATH="/root/.local/bin:$PATH" at the top of heredoc setup_cmds blocks.

Use bash -c only when you need a shell construct (pipes, redirects, &&/||, expansion) in a single command. Do not use bash -lc — the outer wrap already provides the login shell.

File Transfer

file-push and file-pull move files between the host and a running DTU without going through exec. Both commands accept multiple sources before the destination.

# Single file
amplifier-digital-twin file-push <id> ./config.yaml /root/config.yaml
amplifier-digital-twin file-pull <id> /var/log/app.log ./app.log

# Directory (-r is required when any source is a directory)
amplifier-digital-twin file-push -r <id> ./data/ /root/app/
amplifier-digital-twin file-pull -r <id> /root/results/ ./

-r/--recursive defaults to off for both commands. Pass -r when any source is a directory; leave it off for single-file or multi-file transfers.

On file-push -r, the destination is treated as the parent directory and the source's basename is preserved inside it. Pushing ./data/ to /root/app/ lands files at /root/app/data/.... To put contents directly at /root/app/data/, push to /root/app/ and let the basename land naturally (do not push to /root/app/data/ -- that produces /root/app/data/data/...).

Hostname Support (mDNS)

Environments can register a .local hostname via Avahi mDNS, making it easy to tell multiple DTU instances apart (e.g. http://my-app.local:8410/ instead of http://localhost:8410/).

Prerequisites: avahi-daemon and avahi-utils must be installed:

which avahi-publish-address && echo "Avahi OK" || echo "Install: sudo apt install avahi-daemon avahi-utils"

Usage: Set access.hostname in the profile or pass --hostname on the CLI:

amplifier-digital-twin launch my-profile --hostname my-app
# => access URLs will be http://my-app.local:<port>/...

If Avahi is not installed, hostname registration is silently skipped and access URLs fall back to localhost. No error, no failure -- it's a graceful degradation.

Platform support:

• Native Linux: fully supported (LAN-wide resolution via mDNS)
• WSL2: works within WSL2; Windows browsers cannot resolve .local names from WSL2
• macOS/Windows: not supported (warning printed, falls back to localhost)

Updating Running Environments

Profiles can define an update section with commands to pull fresh code and reinstall without destroying the environment:

amplifier-digital-twin update <id> [--var K=V ...] [--skip-readiness]

This enables a fast launch -> update -> test iteration loop. If the profile has refresh_pypi: true in the update section, PyPI overrides are rebuilt from the current state of the source repos before running update commands.

See api-reference.md for the full update command reference and profiles.md for the update profile schema.

Example Profiles

When constructing profiles, read the most relevant examples first to understand established patterns:

read_file("@digital-twin-universe:profiles/tests/amplifier-user-sim.yaml")
read_file("@digital-twin-universe:profiles/amplifier/amplifier-chat.yaml")
read_file("@digital-twin-universe:profiles/amplifier/amplifier-standalone.yaml")
read_file("@digital-twin-universe:profiles/patterns/private-github-repo.yaml")
read_file("@digital-twin-universe:profiles/tests/docker-in-incus.yaml")

The amplifier-standalone profile is a standalone Amplifier user environment with the foundation bundle composed onto every session. Use it when the user wants to exec in and run interactive amplifier sessions immediately, with no extra services or UI on top.

The private-github-repo profile shows how to install from a private GitHub repo without Gitea. It passes GH_TOKEN via passthrough.services and configures git config --global url...insteadOf to authenticate all clones. Use this pattern when you need to test the pushed state of a private repo. For testing local uncommitted changes, use Gitea + url_rewrites instead.

The docker-in-incus profile is a minimal test for running Docker containers inside an Incus-based environment. Use it to verify that nested container networking works on a given host before attempting more complex profiles that depend on Docker.

Profile Placement Convention

When generating or saving DTU profiles, use this default path:

.amplifier/digital-twin-universe/profiles/<profile-name>.yaml

This path is relative to the workspace or current working directory. Create the directory structure if it doesn't exist.

Do not commit generated profiles by default. Profiles are often workspace-specific and ephemeral. If the user explicitly wants a profile shipped with a repo, default to placing it at <repo>/.amplifier/digital-twin-universe/profiles/<profile-name>.yaml.

Agents

For specialized DTU tasks within Amplifier sessions, you MUST use these agents instead of driving the CLI manually:

• dtu-profile-builder — Explores a user's project repo, generates a DTU profile, launches the environment, and hands back access details. Use when the user has a project and wants to create a digital twin for it.

Cleanup Safety

amplifier-digital-twin list returns all DTU environments on the machine, not just ones from your session. Other users or concurrent sessions may have running instances.

Safe pattern: Note the id returned by launch and only destroy that specific ID when you are done.

Dangerous pattern: Iterating list and destroying every entry. This will tear down environments belonging to other sessions.

There is currently no owner or session identifier in the list output. If you need to identify your instance, match on the id you received from launch, or use created_at to narrow down which instance is yours. If you are unsure, leave it and tell the user to clean up when they are ready.

Docker Inside a Digital Twin Universe Environment (pre-flight)

DTU launches enable security.nesting=true by default, so profiles that run Docker inside the Incus container (e.g. spawning worker containers, running Docker Compose stacks) do not need to set it explicitly. A profile can opt out by setting security.nesting: "false" in base.config if isolation matters more than Docker support.

At any point that Docker in Incus might be required, you MUST read the full guide on platform-specific issues and networking paths:

read_file("@digital-twin-universe:docs/docker-in-incus.md")

The docker-in-incus profile can be used to verify the setup works before attempting more complex profiles.

Troubleshooting

For any error, unexpected behavior, or environment issue, read the troubleshooting reference:

read_file("@digital-twin-universe:docs/troubleshooting.md")

If the behavior contradicts the docs, check what changed between versions:

read_file("@digital-twin-universe:docs/CHANGELOG.md")