defi-skills

name	defi-skills
description	Build unsigned DeFi transactions from natural language across multiple chains. Use when the user wants to send, transfer, swap, stake, unstake, wrap, unwrap, supply, withdraw, borrow, repay, deposit, delegate, add liquidity, remove liquidity, or trade yield tokens on-chain. Supports Ethereum, Arbitrum, Base, Optimism, Polygon, and Sepolia. Covers ETH, ERC-20, ERC-721, Aave, Lido, Uniswap, Curve, Compound, MakerDAO, Rocket Pool, EigenLayer, Balancer, Pendle, Fibrous, and WETH.
version	0.2.0
license	MIT-0
metadata	{"openclaw":{"requires":{"bins":"[Truncated]","env":"[Truncated]"},"primaryEnv":"WALLET_ADDRESS","homepage":"https://defi-skills.nethermind.io/","source":"https://github.com/NethermindEth/defi-skills","install":"pip install --upgrade defi-skills"}}

Intent to Transaction

Builds raw unsigned DeFi transactions using the defi-skills CLI. The tool is a deterministic, stateless PlaybookEngine. It takes one action at a time with structured input, resolves token addresses, converts amounts to base units, ABI-encodes calldata, and outputs unsigned transactions. It has no memory between calls.

You are the LLM. Your job is to understand the user's intent, determine the correct action and arguments, then call the CLI with --action and --args. No LLM runs inside the CLI. It is purely deterministic. You handle all planning, decomposition, and sequencing.

The output is an unsigned transaction (to, value, data). It never signs or broadcasts.

Agent Behavior

These are financial transactions. Be collaborative, not autonomous.

Direct intent: If the user's request maps to a single action with clear parameters, build it immediately. No discussion needed. Examples: "Send 0.5 ETH to vitalik.eth", "Supply 100 USDC to Aave", "Wrap 5 ETH".

Multi-step intent: If the request requires multiple actions, present your execution plan to the user before building anything. Explain:

• What steps you will execute and in what order
• What tokens and amounts are involved at each step
• Whether you can build all steps upfront (predictable outputs like stake/wrap) or need to execute step-by-step (unpredictable outputs like swaps)
• Any assumptions you are making (e.g., "I will use the same amount for step 2 since Lido staking is roughly 1:1")

Only proceed after the user confirms the plan. If the user modifies the plan, adjust accordingly.

Ambiguous intent: If the request is vague or could be interpreted multiple ways, ask clarifying questions before doing anything. Do not assume a protocol, token, or strategy. Examples:

• "I want to earn yield on my ETH": Which protocol? Lido staking? Aave supply? Rocket Pool? Each has different risk/reward.
• "Move my stables somewhere safe": Which stablecoins? What does "safe" mean to them? Aave supply? MakerDAO DSR?
• "Do something with my USDC": Too vague. Ask what they want to achieve.

Large amounts or "max": If the user is operating with "max" (entire wallet balance) or amounts you consider significant, confirm the details before building. Remind them that "max" means their entire balance of that token, not just a portion.

Constraints

• Multi-chain support. Supported chains: Ethereum Mainnet (1), Arbitrum (42161), Base (8453), Optimism (10), Polygon (137), Sepolia (11155111). Default is mainnet. Use --chain-id to target other chains. Not all actions are available on all chains — check with defi-skills actions --chain-id <id>.
• One action per CLI call. For multi-step intents, decompose into separate build calls. You are the planner.
• Some actions restrict valid tokens. If you are unsure whether a token is supported for an action, run defi-skills actions <name> --json to check. The CLI will reject unsupported tokens with a clear error listing the valid options.
• Negative amounts are rejected. All amounts must be zero or positive.
• Always check "success" in the JSON response. If success is false, the error field explains what went wrong. Do not proceed with failed builds.
• Some actions have optional parameters with sensible defaults (slippage, fee tier, deadline, recipient address). These are visible via defi-skills actions <name> --json. Inform the user about relevant defaults before building so they can override if needed.

Prerequisites

The CLI must be installed:

pip install --upgrade defi-skills

A wallet address is required. The CLI reads it from (in priority order):

1. --wallet flag on each command
2. WALLET_ADDRESS environment variable
3. Persisted config (defi-skills config set-wallet)

For agents, prefer the env var or --wallet flag — no file writes needed. If no wallet is available, ask the user to provide their address before continuing.

API keys

Most actions that involve on-chain data need ALCHEMY_API_KEY (ENS resolution, swap quotes, "max" balance queries, EigenLayer strategy verification, etc.). Simple actions with known tokens and fixed amounts (like aave_supply with USDC) work without it.

If a build fails with "no web3 instance" or "no RPC provider available", the user needs to set their Alchemy key via environment variable or CLI config:

# Environment variable (preferred for agents)
export ALCHEMY_API_KEY="<KEY>"

# Or persist via CLI config
defi-skills config set alchemy_api_key "<KEY>"

Balancer actions additionally need THEGRAPH_API_KEY:

export THEGRAPH_API_KEY="<KEY>"
# Or persist via CLI config
defi-skills config set thegraph_api_key "<KEY>"

Workflow

Step 1: Identify the Action

Determine the correct action from the supported actions table below. If unsure, or to check availability on a specific chain:

defi-skills actions --json
defi-skills actions --chain-id 42161 --json   # Arbitrum actions only

Step 2: Check Parameters (always)

Always check parameters before building. The call is instant (local lookup) and prevents errors from wrong field names:

defi-skills actions aave_supply --json

Step 3: Build the Transaction

TX=$(defi-skills build --action aave_supply --args '{"asset":"USDC","amount":"500"}' --json)

# On L2 chains, pass --chain-id
TX=$(defi-skills build --action aave_supply --args '{"asset":"USDC","amount":"500"}' --chain-id 42161 --json)

Always check the response before proceeding:

echo "$TX" | jq '.success'        # must be true
echo "$TX" | jq '.transactions'   # ordered array: approvals first, then action

Response Format

The response is a JSON object with success and either transactions (on success) or error (on failure).

On success, transactions is an ordered array. Execute them in order: approval transactions first, then the main action. Some actions need no approval (1 transaction), others need 1 approval (2 transactions), and USDT needs a reset-to-zero step (3 transactions).

{
  "success": true,
  "transactions": [
    {
      "type": "approval",
      "token": "0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48",
      "spender": "0x87870Bca3F3fD6335C3F4ce8392D69350B4fA4E2",
      "raw_tx": {
        "chain_id": 1,
        "to": "0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48",
        "value": "0",
        "data": "0x095ea7b3..."
      }
    },
    {
      "type": "action",
      "action": "aave_supply",
      "target_contract": "0x87870Bca3F3fD6335C3F4ce8392D69350B4fA4E2"
       
       
         
         
         
      
       
         
         
         
         
      
    
  

On failure: {"success": false, "error": "description of what went wrong"}.

Supported Actions

Protocol	Actions	Chains
Transfers	transfer_native, transfer_erc20, transfer_erc721	All chains
WETH	weth_wrap, weth_unwrap	Mainnet, Arbitrum, Base, Optimism, Sepolia
Aave V3	aave_supply, aave_withdraw, aave_borrow, aave_repay, aave_set_collateral, aave_repay_with_atokens, aave_claim_rewards	Mainnet, Arbitrum, Base, Optimism, Polygon, Sepolia
Uniswap V3	uniswap_swap, uniswap_lp_mint, uniswap_lp_collect, uniswap_lp_decrease, uniswap_lp_increase	Mainnet, Arbitrum, Base, Optimism, Polygon, Sepolia
Compound V3	compound_supply, compound_withdraw, compound_borrow, compound_repay, compound_claim_rewards	Mainnet, Arbitrum, Base, Optimism, Polygon, Sepolia
Balancer V2	balancer_swap, balancer_join_pool, balancer_exit_pool	Mainnet, Arbitrum, Base, Optimism, Polygon
Lido	lido_stake, lido_wrap_steth, lido_unwrap_wsteth, lido_unstake, lido_claim_withdrawals	Mainnet only
Curve 3pool	curve_add_liquidity, curve_remove_liquidity	Mainnet only
Curve Gauges	curve_gauge_deposit, curve_gauge_withdraw, curve_mint_crv	Mainnet only
MakerDAO DSR	maker_deposit, maker_redeem	Mainnet only
Rocket Pool

Not all actions are available on all chains. Use defi-skills actions --chain-id <id> --json to check.

How to Build Any Action

For every action, follow these three steps in order:

1. Find the action name from the table above. If unsure, list all:

defi-skills actions --json | jq '.by_protocol'

2. Check its parameters (always do this before building):

defi-skills actions <action_name> --json

This returns required and optional fields with exact parameter names and valid tokens. Use these names in --args.

3. Build the transaction:

TX=$(defi-skills build --action <action_name> --args '{"param":"value"}' --json)
echo "$TX" | jq '.success'
echo "$TX" | jq '.transactions'

Examples

Simple: Aave Supply

defi-skills actions aave_supply --json    # check params first
TX=$(defi-skills build --action aave_supply --args '{"asset":"USDC","amount":"1000"}' --json)

Returns 2 transactions: ERC-20 approval, then supply().

ENS Transfer (needs ALCHEMY_API_KEY)

TX=$(defi-skills build --action transfer_native --args '{"to":"vitalik.eth","amount":"0.5"}' --json)

L2: Supply USDC on Arbitrum

defi-skills actions aave_supply --chain-id 42161 --json   # check params on Arbitrum
TX=$(defi-skills build --action aave_supply --args '{"asset":"USDC","amount":"1000"}' --chain-id 42161 --json)

Multi-step: Stake then Restake (Mainnet)

Lido staking is predictable (~1:1), so build both upfront:

TX1=$(defi-skills build --action lido_stake --args '{"amount":"10"}' --json)
TX2=$(defi-skills build --action eigenlayer_deposit --args '{"asset":"stETH","amount":"10"}' --json)

Multi-Step Planning

The CLI is stateless. Each build call is independent with no memory of previous calls and no way to reference the output of a prior transaction. When planning multi-step intents:

• Predictable outputs (stake, wrap, supply): input roughly equals output. Build all steps upfront with the same amount. Example: stake 10 ETH on Lido produces ~10 stETH, so pass "amount":"10" to the EigenLayer deposit.
• Unpredictable outputs (swaps, complex withdrawals): the output depends on live prices or on-chain state. You cannot know the exact amount at build time. Build and execute step 1 first, then ask the user for the result or check on-chain before building step 2. Do not guess amounts.
• "max" means entire wallet balance, not "whatever came from the last step." If the user already holds the token, "max" will include their existing balance plus the new amount. Make sure the user understands this before using it.

Error Handling

• success: false: Read the error field. Do not retry blindly. Fix the input based on the error message.
• Unknown action: Run defi-skills actions to see all supported actions.
• Unsupported token: The error lists valid tokens for the action.
• Action not available on chain: The action exists but not on the requested chain. Use defi-skills actions --chain-id <id> to see what's available. Suggest mainnet if the action is mainnet-only (e.g., Lido, EigenLayer, Curve).
• Negative amount: Amounts must be zero or positive.
• ENS resolution failed: The user needs to run defi-skills config set alchemy_api_key <KEY>, or provide a hex address instead. Note: ENS is only available on Ethereum Mainnet and Sepolia. On L2 chains, always use hex addresses (0x...).
• Missing wallet: Run defi-skills config set-wallet <address>.
• CLI not found: Run pip install defi-skills.

Safety

• Output is an unsigned transaction. The tool never signs or broadcasts.
• No private keys are involved at any stage.
• The deterministic build path (--action + --args) uses zero LLM tokens.
• Always review the raw_tx before signing. Verify to, value, and data.