with one click
simulink-power-electronics
simulink-power-electronics contains 10 collected skills from npuzsy, with repository-level occupation coverage and site-owned skill detail pages.
Skills in this repository
Use when working on Simulink or Simscape Electrical power-electronics models, including inverter, DC-DC converter, rectifier, motor-drive, battery/BMS, renewable-grid, HVDC/FACTS, converter layout, gate-routing, solver, waveform, control-algorithm, or simulation validation tasks.
Use when working on Simulink or Simscape Electrical DC-DC converter models, including buck, boost, buck-boost, flyback, forward, resonant, bidirectional converters, MPPT front ends, duty-cycle control, and regulation diagnostics.
Use when working on Simulink or Simscape Electrical motor-drive power-electronics models, including PMSM, BLDC, induction motor drives, FOC, DTC, torque/speed/current loops, inverter-fed machines, and drive waveform validation.
Use when working on Simulink or Simscape Electrical three-phase grid-connected inverter models, including SPWM/SVPWM, T-type or NPC three-level bridges, grid-side voltage/current waveform balance, gate routing, sector tables, and switching-state validation.
Use when working on Simulink or Simscape Electrical battery, charger, and BMS-linked power-electronics models, including pack behavior, balancing, SOC/SOH, bidirectional charging, protection, and storage converter interfaces.
Use when working on Simulink or Simscape Electrical HVDC and FACTS models, including VSC-HVDC, LCC-HVDC, STATCOM, SVC, UPFC, transmission-system controls, power-flow regulation, and grid disturbance studies.
Use when working on Simulink or Simscape Electrical multilevel converter models beyond the populated three-phase inverter notes, including MMC, cascaded H-bridge, flying-capacitor converters, capacitor balancing, and arm-energy control.
Use when working on Simulink or Simscape Electrical rectifier or active-front-end models, including diode and thyristor rectifiers, PWM rectifiers, PFC, DC-link regulation, line-current quality, and regeneration.
Use when working on Simulink or Simscape Electrical renewable and grid-connected power-electronics systems, including PV, wind, storage-coupled inverters, microgrids, MPPT, PLL, grid synchronization, and grid-code validation.
Use when working on Simulink or Simscape Electrical resonant converter or wireless power transfer models, including compensation networks, inductive links, frequency control, soft switching, and resonant-tank validation.