chipseq-super-enhancers

name	chipseq-super-enhancers
description	Identifies super-enhancers from H3K27ac, MED1, or BRD4 ChIP-seq using ROSE, ROSE2, LILY, HOMER -style super, and ENCODE dELS cross-referencing. Handles peak stitching parameters, ranking choices, hockey-stick inflection, marker choice (H3K27ac vs MED1/BRD4), and cross-condition comparison with spike-in normalization. Constructs core regulatory circuitry (Saint-Andre 2016) from SE-encoded TFs. Use when identifying cell-identity / cancer-associated regulatory domains, comparing super-enhancers between conditions, identifying master transcription factor networks, or predicting BET-inhibitor responsiveness.
tool_type	mixed
primary_tool	ROSE

Version Compatibility

Reference examples tested with: ROSE (stjude/ROSE, 2018+), ROSE2 (linlabbcm/rose2, 2021+), LILY (BoevaLab/LILY, 2020+), HOMER 4.11+, samtools 1.19+, bedtools 2.31+, GenomicRanges 1.54+.

ROSE is unmaintained Python 2; ROSE2 is the Python 3 port with the same algorithm. LILY (Boeva 2017) is a refactored implementation with input-control background subtraction for low-quality H3K27ac data.

Super-Enhancer Calling

"Identify super-enhancers driving cell identity / cancer biology" -> Stitch nearby active enhancer peaks (H3K27ac, MED1, or BRD4) within a stitching window, exclude proximal-promoter signal, rank by total signal, find the hockey-stick inflection point where signal sharply increases, and classify all stitched regions above the inflection as super-enhancers.

• CLI (ROSE / ROSE2): python ROSE_main.py -g HG38 -i peaks.gff -r h3k27ac.bam -c input.bam -s 12500 -t 2500
• CLI (HOMER): findPeaks tag_dir/ -style super -i input_tag_dir/
• CLI (LILY): variant with input-control background subtraction
• R (custom hockey-stick): rank enhancers by signal, find tangent-line inflection

The SE concept (Whyte 2013) is a thresholding heuristic on a continuous signal distribution (Pott & Lieb 2015 Nat Genet), not a categorical biological category. Functional CRISPR-tiling at SE loci (Hnisz 2017; Dukler 2017) shows only 1-3 constituent elements per SE are essential; the "SE" label is a useful operational definition for BET-inhibitor responsiveness and cell-identity gene regulation, not an absolute biological property.

Marker Choice: H3K27ac vs MED1 vs BRD4

Marker	Captures	When to prefer
H3K27ac	Active regulatory elements broadly	Most widely available; standard for SE definition since Whyte 2013
MED1	Mediator complex accumulation (the defining biology)	Direct readout of SE; less common antibody; lower signal-to-noise
BRD4	BET cofactor accumulation	Most predictive of BET-inhibitor responsiveness; clinical relevance
H3K27ac + MED1 intersection	High-confidence SE	Gold standard if both available
dELS from ENCODE cCREs	Cell-type-agnostic distal enhancer registry	Cross-reference; not SE-specific by itself

Operational rule: H3K27ac for discovery; MED1 or BRD4 ChIP for functional / therapeutic claims. SE called on H3K27ac alone may not respond to BET inhibitors; SE called on BRD4 will.

Algorithmic Taxonomy

Tool	Method	Strength	Fails when
ROSE (Whyte 2013)	Stitch within 12.5 kb, exclude ±2.5 kb of TSS, rank by signal, hockey-stick inflection	Original; widely cited; canonical reference	Python 2 only; unmaintained; ROSE_main.py crashes on Python 3
ROSE2 (Lin 2016; linlabbcm)	Same algorithm, Python 3 port	Maintained; identical output to ROSE	None vs ROSE
LILY (Boeva 2017)	ROSE-like with input-control background subtraction	Works on lower-quality H3K27ac data; subtracts input	Adds complexity; less validated; specific to neuroblastoma/glioma in original paper
HOMER -style super	Native ROSE-like in HOMER framework; stitching without TSS exclusion	Integrated with HOMER workflow	Different stitching defaults; not directly comparable to ROSE counts
Custom hockey-stick (R)	Generic rank-by-signal + tangent inflection	Flexible; works on any signal definition	Reinvents algorithm; verify against ROSE on known dataset

Most papers use ROSE/ROSE2 with default stitching (12.5 kb) and TSS exclusion (2.5 kb). This is the de facto standard for cross-paper comparison. HOMER's -style super produces different counts and is not directly comparable.

Decision Tree: SE Calling Workflow

Scenario	Recommended pipeline
Standard SE discovery, H3K27ac available	ROSE2 with default -s 12500 -t 2500; input control for subtraction
Predict BET-inhibitor response	BRD4 ChIP -> ROSE2 (or H3K27ac SE intersected with BRD4 peaks)
Compare SE between conditions (drug treatment)	ROSE2 per condition + spike-in normalization (HDACi/BETi/EZH2i need ChIP-Rx)
Build core regulatory circuitry	ROSE2 + Saint-Andre 2016 algorithm: identify TFs encoded by SE that bind own SE + cross-bind other SE-encoded TFs
Low-quality H3K27ac (low FRiP)	LILY with input subtraction
Compare with ENCODE dELS atlas	ROSE2 + intersect with ENCODE cCRE dELS BED
Differential SE between conditions	ROSE2 per condition + signal-quantitative differential (DiffBind on SE regions)

ROSE / ROSE2 Workflow

Goal: Identify super-enhancers by stitching nearby active enhancer peaks within a stitching distance and ranking by total signal.

Approach: Convert peaks to GFF, exclude promoter-proximal peaks via -t (TSS exclusion window), stitch enhancers within -s (default 12.5 kb), rank by total H3K27ac (or MED1/BRD4) signal, find the hockey-stick inflection point, classify regions above as super-enhancers.

# Install ROSE2 (Python 3 port; unmaintained ROSE Py2 not recommended)
git clone https://github.com/linlabbcm/rose2.git
pip install ./rose2

# Convert peaks BED to GFF (ROSE requires GFF input)
awk 'BEGIN{OFS="\t"} {print $1,"peaks","enhancer",$2,$3,".",$6,".","ID="NR}' \
    peaks.narrowPeak > peaks.gff

# Filter promoter peaks before SE calling (within 2.5 kb of TSS)
# ROSE handles this via -t flag; preferable to pre-filter for clarity
bedtools intersect -a peaks.narrowPeak -b promoters_2kb.bed -v > enhancer_peaks.bed

# Run ROSE2 with input control
rose2 -g HG38 -i peaks.gff \
    -r h3k27ac.bam -c input.bam \
    -o rose_output/ \
    -s 12500 \
    -t 2500

ROSE2 outputs:

• *_AllEnhancers.table.txt — all stitched enhancer regions ranked by signal
• *_SuperEnhancers.table.txt — SE only (above hockey-stick inflection)
• *_Enhancers_withSuper.bed — BED with SE / TE classification
• *_Plot_points.png — hockey-stick plot

Cross-Condition SE Comparison

This is the analysis most often done wrong. SE calling thresholds depend on absolute signal, so any global shift (HDACi, BETi, EZH2i) confounds direct SE-count comparison.

Wrong approach: Call ROSE2 on condition A and condition B separately, intersect SE BEDs, report "gained/lost SE."

Right approach:

1. Spike-in normalize signal between conditions (see chip-seq/spike-in-normalization)
2. Build a union SE set from both conditions
3. Quantify signal at union SE regions per condition (DiffBind on the union)
4. Apply differential testing with appropriate normalization (background-bin TMM or spike-in)

library(DiffBind)
# Union of SE BED files from condition A and B
union_se <- rtracklayer::import('union_SE.bed')
# Run DiffBind quantification on this region set with spike-in normalization

For BET-inhibitor experiments: the biology IS that all SE decrease globally; spike-in is mandatory.

Core Regulatory Circuitry (Saint-André 2016)

The CRC algorithm identifies master TF networks from SE annotations:

1. List all TFs encoded by SE-associated genes
2. For each such TF, check if its motif appears in its own SE (auto-regulation)
3. Build a graph where TFs encoded by SE-A bind to motifs in SE-B
4. Identify highly-interconnected sub-networks (CRC)

# Install CRC pipeline (linlabbcm CRC)
git clone https://github.com/linlabbcm/CRC2.git

# Requires: SE BED, TF motif annotations, gene-SE mapping
python CRC2/crc.py -e SE_table.txt -g genes.gtf -b h3k27ac.bam

CRC outputs the connected components of the regulatory network. Master TFs typically appear in the largest component with high out-degree.

ENCODE dELS Cross-Reference

ENCODE distal Enhancer-Like Signatures (dELS) are the cell-type-agnostic regulatory atlas (see chip-seq/peak-annotation). Cross-referencing SE against dELS:

• Validates SE constituents are at canonical regulatory elements
• Identifies SE constituents NOT in the dELS registry (potentially cell-type-specific)
• Provides chromatin-state context (DNase + H3K27ac signatures)

wget https://api.wenglab.org/screen_v13/screen_human_ccres_simple.bed.gz
gunzip screen_human_ccres_simple.bed.gz
awk -F'\t' '$NF == "dELS"' screen_human_ccres_simple.bed > dels.bed

# Fraction of SE constituents overlapping dELS
bedtools intersect -a SuperEnhancers.bed -b dels.bed -u | wc -l
bedtools intersect -a SuperEnhancers.bed -b dels.bed -wa -wb > se_with_dels.tsv

Per-Tool Failure Modes

ROSE -- Python 2 dependency

Trigger: Running ROSE_main.py on a modern system (Python 3 only).

Mechanism: ROSE is Python 2 code; print statements without parens, dict.iteritems(), etc.

Symptom: SyntaxError on first import.

Fix: Use ROSE2 (linlabbcm Python 3 port); identical algorithm and output format.

ROSE / ROSE2 -- Stitching distance default not appropriate for all biology

Trigger: Using default -s 12500 (12.5 kb) on small genomes or compact gene structures.

Mechanism: Default was set on human/mouse vertebrate genomes; Drosophila / yeast / plants have different regulatory architecture.

Fix: For non-vertebrate genomes, reduce stitching distance proportionally (e.g., -s 2500 for Drosophila, -s 500 for yeast).

ROSE / ROSE2 -- TSS exclusion can remove promoter-associated enhancers

Trigger: Default -t 2500 (exclude peaks within 2.5 kb of TSS) on promoter-proximal enhancers (e.g., pELS class).

Mechanism: TSS-proximal enhancers are filtered out; SE definition becomes distal-only.

Symptom: Lower SE counts than expected for cell types with promoter-enhancer architecture (e.g., human ES cells).

Fix: Reduce TSS exclusion to -t 500 or -t 0 if including promoter-proximal regulatory regions; document the decision.

H3K27ac SE vs BRD4 SE -- BET-inhibitor mismatch

Trigger: Calling SE on H3K27ac and claiming BET-inhibitor responsiveness.

Mechanism: H3K27ac marks active enhancers broadly; not all H3K27ac-positive SE have BRD4 accumulation.

Symptom: Predicted BET-sensitive genes don't respond to BET inhibitors in cell-based assays.

Fix: For BET-inhibitor claims, use BRD4 ChIP for SE calling, or intersect H3K27ac SE with BRD4 peaks.

Cross-condition SE counting -- Wrong normalization

Trigger: Comparing SE counts in HDACi-treated vs DMSO without spike-in normalization.

Mechanism: SE calling thresholds depend on absolute signal; HDACi globally increases H3K27ac, raising every region's signal and shifting the hockey-stick inflection.

Symptom: Reports "1000 SE in HDACi vs 500 in DMSO" when biology is just global H3K27ac increase.

Fix: Spike-in normalize BAMs (ChIP-Rx with Drosophila chromatin), call SE on scaled signal; OR quantify signal at a union peak set rather than calling SE per condition.

LILY -- Input subtraction artifacts

Trigger: Running LILY without high-quality matched input control.

Mechanism: LILY subtracts background based on input signal; mismatched input introduces artifactual negative signal.

Fix: Use LILY only when input quality is good (same library prep, same depth, same fragmentation); otherwise use ROSE2 with standard input handling.

Hockey-stick inflection -- Sensitive to peak count

Trigger: Calling SE on a small peak set (< 5000 enhancers).

Mechanism: Hockey-stick inflection depends on having a long "tail" of typical enhancers; few peaks distort the inflection.

Symptom: SE count is unreasonably high (50%+ of all peaks called SE) or unreasonably low (< 50 SE).

Fix: Require ≥ 5000 enhancer peaks input to ROSE2; if fewer, use absolute signal cutoff (e.g., top 5% by signal density) rather than hockey-stick.

Reconciliation: When SE Calls Disagree

Pattern	Likely cause	Action
ROSE2 vs HOMER -style super differ	Different stitching distance / TSS handling	Use ROSE2 standard for cross-paper comparison; HOMER for HOMER-integrated workflows
H3K27ac SE ≠ MED1 SE at same locus	H3K27ac is broad; MED1 marks subset of active SE	MED1 SE is the more functional definition; H3K27ac includes inactive-but-acetylated regions
SE called in DMSO but not in BETi (or vice versa)	Global signal shift confounds threshold	Spike-in normalize; compare quantitatively at union SE set
SE shifts location between replicates	Marginal calls below inflection; hockey-stick inflection noisy	Use top N SE by rank for robustness; or require SE in ≥ 2/3 replicates
LILY and ROSE2 disagree on SE count	LILY's input subtraction differs	Trust ROSE2 unless input quality is poor (low FRiP)

Common Errors

Error / symptom	Cause	Solution
SyntaxError: invalid syntax in ROSE	Python 2 codebase	Use ROSE2 (linlabbcm) Python 3 port
GFF format error	Wrong column ordering	Use awk template: chr<TAB>peaks<TAB>enhancer<TAB>start<TAB>end<TAB>.<TAB>strand<TAB>.<TAB>ID=N
ROSE2 reports 0 SE	Hockey-stick inflection failed; too few enhancers	Inspect _Plot_points.png; ≥ 5000 peaks input recommended
Genome flag error in ROSE2	Genome not pre-configured	Genome flag must be one of HG18, HG19, HG38, MM8, MM9, MM10
All SE at promoters	TSS exclusion too narrow OR data dominated by promoter signal	Verify -t 2500; check input is H3K27ac at enhancers not full chromatin
Cross-condition SE gain/loss not reproducible	No spike-in normalization	Spike-in (ChIP-Rx) or quantitative differential on union SE

References

• Whyte WA et al 2013 Cell 153:307 (super-enhancers, ROSE)
• Lovén J et al 2013 Cell 153:320 (SE characterization, BET sensitivity)
• Hnisz D et al 2013 Cell 155:934 (SE in cell identity)
• Pott S & Lieb JD 2015 Nat Genet 47:8 (SE as continuum critique)
• Lin CY et al 2016 Nature 530:57-62 (MYC enhancers; ROSE2-era analyses)
• Saint-André V et al 2016 Genome Res 26:385 (core regulatory circuitry)
• Boeva V et al 2017 Cell Rep 21:1357 (LILY; neuroblastoma SE)
• Hnisz D et al 2017 Cell 169:13 (CRISPR-tiling SE function)
• Dukler N et al 2017 Genome Res 27:1869 (SE constituent function)
• Sengupta S & George RE 2017 Trends Cancer 3:269 (SE function review)

Related Skills

• chip-seq/peak-calling - Generate H3K27ac / MED1 / BRD4 peaks for SE input
• chip-seq/chipseq-qc - Filter hyper-ChIPable peaks before SE calling
• chip-seq/spike-in-normalization - Mandatory for cross-condition SE comparison
• chip-seq/differential-binding - Quantitative differential testing on union SE set
• chip-seq/peak-annotation - Annotate SE-associated genes; cross-reference dELS
• chip-seq/cut-and-run-tag - SE calling on CUT&RUN/CUT&Tag H3K27ac (different spike-in)
• atac-seq/enhancer-gene-linking - ENCODE-rE2G for SE-target gene assignment
• data-visualization/genome-tracks - SE region visualization