Menu
Turn one document into a kawaii NotebookLM slide-deck PDF. Use for "wowerpoint this", "make a deck about <file>", "turn this report into slides", or any request to render a single document as shareable narrative slides.
Facilitate a read-only standup across git worktrees, branches, or PRs to compare changes and produce one consolidation plan.
Token-optimized structural code search using tree-sitter AST parsing. Use instead of reading full files when you need to understand code structure, find functions, or explore a codebase efficiently.
Create a detailed, phased implementation plan with documentation discovery. Use when asked to plan a feature, task, or multi-step implementation — especially before executing with do.
Cluster a GitHub issue backlog by root cause into a small set of plan-master issues, redirect children with a standardized comment, and bundle architectural-fix PRs that close clusters atomically. Use when an issue tracker has accumulated dozens of reports that share underlying defects, when asked to triage / consolidate / cluster / dedupe issues, when asked to build a plan series or roadmap from open issues, or when routing a new incoming bug into an existing plan.
Generate a serial week-by-week narrative digest of a project's full claude-mem timeline. Splits the timeline into per-ISO-week files, then runs one consecutive subagent per week — each receiving the prior week's carry-forward block — to produce one chapter per ISO week of data. Use when asked for "weekly digests", "week-by-week story", "serial timeline", or "narrative chapters" of a project's history.
Audit a design against Dieter Rams' ten "Good design is..." principles, then hand off a /make-plan prompt for one of three outcomes — new design, refine design, or redesign. Use when the user says "audit this design", "design review", "check this UI against Rams", "is this UI good", "critique this design", "design audit", or asks for a critique that should lead to a plan.
| name | wowerpoint |
| description | Turn one document into a kawaii NotebookLM slide-deck PDF. Use for "wowerpoint this", "make a deck about <file>", "turn this report into slides", or any request to render a single document as shareable narrative slides. |
One doc in, one PDF out. Slide-deck only — videos and podcasts from the same engine are noticeably worse and out of scope; refer the user to the notebooklm CLI directly if they want those.
If notebooklm auth check returns 0 and command -v jq resolves, skip.
uv tool install --with playwright --force notebooklm-py
$(uv tool dir)/notebooklm-py/bin/playwright install chromium
jq is required by the workflow's JSON parsing; install if missing (brew install jq on macOS, or your distro's package manager).
Then the user authenticates interactively — do not script. Tell them to type ! notebooklm login so the OAuth ENTER lands in their terminal.
You need exactly one source doc. If it doesn't exist or is too thin to carry a deck, write it first — use mem-search and sequential thinking to make it comprehensive (long-form, narrative, several thousand words is normal). Do not paper over a weak source by adding more sources.
notebooklm auth check 2>&1 | tail -5
Exit 1 with Run 'notebooklm login' to authenticate. = halt and tell the user.
NOTEBOOK_ID=$(notebooklm create "<title>" --json | jq -r .notebook.id)
SOURCE_ID=$(notebooklm source add "<doc-path>" --notebook "$NOTEBOOK_ID" --json | jq -r .source.id)
Title: H1 of the source doc, or its filename stem; append a date for dated work.
JSON envelope keys differ — create → .notebook.id, source add → .source.id, generate → .task_id. Wrong key = empty string = silent downstream failure.
Generation takes ~10 minutes; never block on it. Use the template below with run_in_background: true.
Print the notebook URL so the user can watch live:
https://notebooklm.google.com/notebook/<NOTEBOOK_ID>
The subagent's completion notification fires when the file is on disk.
Adjacent to the source, parallel filename:
<source-dir>/<source-stem>-slides.pdf
If the source isn't somewhere that makes sense as an output location, default to reports/<stem>-slides.pdf.
After the PDF lands on disk, the subagent also POSTs it to the WOWerpoint Server, which converts the 16:9 deck into a 9:16 mobile twin and returns a share URL. The share URL is the primary deliverable to the user; the PDF on disk is the backup.
Required env (exported in the user's shell — the subagent inherits the parent's environment, so plain export is enough; no dotenv loader runs):
WOWERPOINT_API_BASE=https://wowerpoint-api.<subdomain>.workers.dev
WOWERPOINT_VIEWER_BASE=https://wowerpoint-viewer.<subdomain>.workers.dev
WOWERPOINT_UPLOAD_TOKEN=<token>
If any var is missing, skip the share-link step and just hand the PDF over.
Upload pattern (run AFTER the subagent confirms the PDF exists on disk). Capture the full response so empty id and error payloads are handled — jq -r '.id' returns the literal string null on a missing key, so always pipe through .id // empty:
if [ -n "$WOWERPOINT_API_BASE" ] && [ -n "$WOWERPOINT_UPLOAD_TOKEN" ] && [ -n "$WOWERPOINT_VIEWER_BASE" ]; then
UPLOAD_JSON=$(curl -sS --connect-timeout 10 --max-time 30 -X POST "$WOWERPOINT_API_BASE/api/decks" \
-H "Authorization: Bearer $WOWERPOINT_UPLOAD_TOKEN" \
-F "file=@<OUTPUT_PATH>" \
-F "title=<TITLE>")
DECK_ID=$(printf '%s' "$UPLOAD_JSON" | jq -r '.id // empty')
API_ERROR=$(printf '%s' "$UPLOAD_JSON" | jq -r '.error // empty')
if [ -n "$API_ERROR" ] || [ -z "$DECK_ID" ]; then
echo "WOWerpoint upload warning: ${API_ERROR:-missing id}"
else
echo "Share URL: $WOWERPOINT_VIEWER_BASE/d/$DECK_ID"
fi
fi
The returned id is a kebab-case slug derived from the title with a random creature suffix (e.g. tokenrouter-quest-hawk, or velvet-comet-tiger if the title is empty or non-ASCII). The share URL is:
$WOWERPOINT_VIEWER_BASE/d/<id>
It works immediately (shows a "still converting…" page that auto-reloads when ready). Conversion takes ~1–2 min per slide. Print the share URL in your final response.
One sentence. Default:
Use kawaii characters to tell the story of <subject>. Keep it warm and clear.
Replace <subject> with a one-phrase description from the source doc's H1 or the user's framing. If the user supplies their own prompt, pass it through verbatim — don't expand it.
You're handling NotebookLM slide-deck generation. Work in `<repo-absolute-path>`.
Context:
- The `notebooklm` CLI is installed and authenticated (parent verified with `notebooklm auth check`).
- A notebook and source already exist.
Inputs:
- Notebook ID: `<NOTEBOOK_ID>`
- Source ID: `<SOURCE_ID>`
- Generation prompt: `<PROMPT>`
- Output path: `<OUTPUT_PATH>`
- Deck title: `<TITLE>` (the notebook title, used by the share-link step)
Steps:
1. Wait for source: `notebooklm source wait <SOURCE_ID> -n <NOTEBOOK_ID> --timeout 600`
Exit 0 = ready, 1 = error, 2 = timeout. On timeout, run `notebooklm source list -n <NOTEBOOK_ID> --json` and report status.
2. Generate: `notebooklm generate slide-deck "<PROMPT>" --format detailed --length default --notebook <NOTEBOOK_ID> --json --retry 2`
Parse `task_id` from the JSON (key is `task_id` at top level).
On `GENERATION_FAILED` or "No result found for RPC ID": sleep 300, retry once, then give up.
3. Wait for artifact: `notebooklm artifact wait <task_id> -n <NOTEBOOK_ID> --timeout 1800`
4. Download: `notebooklm download slide-deck <OUTPUT_PATH> -a <task_id> -n <NOTEBOOK_ID>`
5. Verify: `ls -la <OUTPUT_PATH>` confirms the file exists.
6. Upload to WOWerpoint Server for a mobile share link. Skip silently if any of `WOWERPOINT_API_BASE`, `WOWERPOINT_UPLOAD_TOKEN`, or `WOWERPOINT_VIEWER_BASE` is unset. Otherwise:
```bash
if [ -n "$WOWERPOINT_API_BASE" ] && [ -n "$WOWERPOINT_UPLOAD_TOKEN" ] && [ -n "$WOWERPOINT_VIEWER_BASE" ]; then
UPLOAD_JSON=$(curl -sS --connect-timeout 10 --max-time 30 -X POST "$WOWERPOINT_API_BASE/api/decks" \
-H "Authorization: Bearer $WOWERPOINT_UPLOAD_TOKEN" \
-F "file=@<OUTPUT_PATH>" \
-F "title=<TITLE>")
DECK_ID=$(printf '%s' "$UPLOAD_JSON" | jq -r '.id // empty')
API_ERROR=$(printf '%s' "$UPLOAD_JSON" | jq -r '.error // empty')
if [ -n "$API_ERROR" ] || [ -z "$DECK_ID" ]; then
echo "WOWerpoint upload warning: ${API_ERROR:-missing id}"
else
echo "Share URL: $WOWERPOINT_VIEWER_BASE/d/$DECK_ID"
fi
fi
On warning, the PDF on disk is still a valid deliverable — do not retry the upload.
Report briefly (under 200 words):
Do NOT poll status manually. The wait commands handle backoff.
## Failure modes
- **`pip: command not found`** — modern macOS doesn't ship pip on PATH. Use `uv tool install`.
- **`Playwright not installed`** — install `notebooklm-py` with `--with playwright`, then `playwright install chromium`.
- **`Run 'notebooklm login' to authenticate`** — only the user can complete OAuth.
- **`task_id` parsed as empty string** — wrong JSON envelope key. `generate` returns `{"task_id": "..."}` at top level.
- **Rate-limit (`GENERATION_FAILED` or "No result found for RPC ID")** — `--retry 2` handles transients; persistent failure means wait 5–10 minutes or fall back to the web UI.
- **Source upload denied for sensitive docs** — confirm before adding sources containing credentials, customer data, or unreleased product info. NotebookLM is a Google service.
- **`--length long` does not exist** — only `default|short`. If the user asks for "long slides," use `default` and explain.
- **No `--style` flag** — kawaii lives in the prompt text.
## Operational tips
- **Rerun cheaply** — once the notebook + source exist, regenerating with a different prompt only repeats generation + download. Reuse `NOTEBOOK_ID` and `SOURCE_ID`.
- **Web UI fallback** — if generation is rate-limited >30 minutes, open the notebook URL, trigger generation in the UI, then `notebooklm artifact list -n <NOTEBOOK_ID>` and `download`.