The fifteen fundamental cooking techniques that together cover most home kitchen work. Organized by the transformation they perform (heat transfer, water management, emulsion, ferment, cut) rather than by cuisine. Covers knife work, sauté, sear, braise, roast, poach, boil, steam, grill, bake, stew, reduce, deglaze, emulsify, and pickle/ferment, each with the physics, the signal, the common failure, and a diagnostic question. Use when teaching a cook, substituting a technique, or diagnosing why a dish failed.
Install with Codex or Claude Copy this prompt, paste it into Codex, Claude, or another assistant, and let it review the skill page and install it for you.
A direct command skips the review prompt. Inspect the source before running it.
The fifteen fundamental cooking techniques that together cover most home kitchen work. Organized by the transformation they perform (heat transfer, water management, emulsion, ferment, cut) rather than by cuisine. Covers knife work, sauté, sear, braise, roast, poach, boil, steam, grill, bake, stew, reduce, deglaze, emulsify, and pickle/ferment, each with the physics, the signal, the common failure, and a diagnostic question. Use when teaching a cook, substituting a technique, or diagnosing why a dish failed.
Most home cooking is a recombination of fifteen fundamental techniques. Recipes are long because they encode the specific sequence of techniques for a specific dish; the techniques themselves are short. A cook who owns the fifteen can substitute, improvise, and recover from failure. A cook who owns only recipes is fragile: they can follow the instructions but cannot respond when an ingredient is missing, when the heat is wrong, when the timing slips. This skill catalogs the techniques by what they do physically, not by what cuisine they come from, because the physics is the same in every kitchen.
Agent affinity: child (technique pedagogy and French-school precision), waters (ingredient-first application), fisher-he (writerly description of what a cook should look for)
No cooking technique survives bad knife work. A dull knife produces uneven cuts; uneven cuts cook unevenly; unevenly cooked food is always worse than evenly cooked food no matter what technique is applied downstream. Knife work is therefore the first technique taught and the last to degrade.
Physics. A knife cuts by applying pressure across a narrow edge to separate fibers. A sharp edge concentrates force; a dull edge spreads force and crushes rather than cuts.
Cuts to know. Julienne (thin matchstick), brunoise (small dice), small dice, medium dice, large dice, chiffonade (leafy), mince, rough chop. Each cut has an implied size range; consistency within a cut is more important than absolute size.
Signal of correctness. The cut piece falls cleanly away from the blade without tearing. The surface of the cut is smooth, not ragged. The board picks up juice from crushing, not from cutting.
Common failure. Dull knife, rushing, poor grip. The fix is almost always "stop, sharpen or hone, and slow down."
2. Sauté
Physics. High-temperature cooking in a shallow layer of fat, with frequent motion. Conduction from pan to food, with fat as the heat-transfer medium. Water in the food evaporates fast; Maillard browning begins at around 140 C.
Signal. Sizzle is audible and continuous; food moves freely in the pan; browning is even across the surface.
Common failure. Pan too cool (food steams instead of browns), pan too full (temperature drops, food steams), moving the food too little (uneven browning) or too much (no contact long enough to brown).
Diagnostic. "Are the bits sizzling? Are they browning? If not, is the pan hot enough and is there room?"
3. Sear
Physics. Very high temperature, brief contact, to produce a brown crust on the exterior of a larger piece of protein or vegetable. Sear is not cooking through — it is surface chemistry. The interior finishes later by another technique (roast, braise, or rest).
Signal. The protein releases from the pan when the crust is formed. If it sticks, it is not ready to flip.
Common failure. Wet surface (pats dry first), crowded pan (temperature drops below sear threshold), flipping too soon (crust tears).
4. Roast
Physics. Dry heat in an oven, surrounding the food with hot air. Surface dehydrates and browns; interior cooks by conduction from the surface inward. Temperature and time trade off — higher oven, shorter time, more crust; lower oven, longer time, more even interior doneness.
Signal. Exterior is browned and firm; interior temperature matches the target (use a probe thermometer for meat).
Common failure. Oven too cool (no crust, meat sits in its own steam), oven too hot (crust burns before interior is done), rack too low (bottom burns), forgetting the rest (cut immediately, juice runs out).
5. Braise
Physics. Sear first, then cook slowly in a small amount of liquid with a cover, so the food steams and simmers simultaneously. Tough cuts become tender because collagen breaks down into gelatin over long, moist, moderate heat.
Signal. The liquid is barely bubbling; the meat is fork-tender but not falling apart; the sauce has body.
Common failure. Too much liquid (boiled meat instead of braised), too little liquid (scorch), too high temperature (meat toughens before collagen breaks down), uncovered too long (dries out).
6. Poach
Physics. Submerge in liquid held just below simmer (around 70-80 C). Gentle, no agitation. Used for delicate proteins (fish, eggs) and for infusing flavor from the liquid into the food.
Signal. The liquid shows shimmer and occasional tiny bubbles, not a rolling motion. The food holds its shape.
Common failure. Liquid too hot (protein toughens, egg breaks up), liquid too cold (food sits in bacterial danger zone), moving the food (breaks delicate surface).
7. Boil
Physics. Submerge in liquid at a rolling 100 C. Fast heat transfer, aggressive mechanical action from bubbles. Used for starches (pasta, rice, potato) and for blanching vegetables to set color before another finish.
Signal. Constant rolling bubbles. For pasta, the bite test; for rice, absorption done; for vegetables, color brightens then shock in cold water.
Common failure. Under-salted water (pasta is bland through and through), water volume too low (starches stick together), over-boil (mushy).
8. Steam
Physics. Food suspended over boiling water, cooked by the steam alone without direct contact with liquid. No nutrient loss to the cooking water; gentle; preserves texture.
Signal. Steam is visible; food is cooked just enough that a fork enters with light resistance.
Common failure. Pot runs dry (burns), food sits in steam too long (overcooked), lid too loose (steam escapes, temperature drops).
9. Grill
Physics. Radiant and conductive heat from an open flame or hot element below the food. High temperature, dry, with characteristic grill-marks from the contact points.
Signal. Sear lines from the grates; distinctive flavor from fat drips hitting coals and smoking back onto the food.
Common failure. Flare-ups from excess fat, cold spots on uneven grill, food moved too early (sticks and tears).
10. Bake
Physics. Dry heat in an oven, but for non-roast applications — bread, pastry, casseroles, cakes. Unlike roast, bake often involves doughs or batters where gluten development, leavening, and Maillard browning all happen at once.
Signal. Crust set, interior fully cooked, structure holds when removed (toothpick test for cake, internal temperature for bread).
Common failure. Oven not preheated (rise fails), wrong rack (bottom or top burns), opening oven too often (temperature drops, soufflé collapses).
11. Stew
Physics. Long simmer in abundant liquid. Used for tough cuts and beans. Differs from braise in that the food is fully submerged and the goal is a soupy or saucy result, not a concentrated pan sauce.
Signal. Liquid gently bubbles; solids are tender; flavors have merged across the pot.
Common failure. Boil instead of simmer (meat toughens), too much water (flavor dilutes), too little (burn), rushed (collagen does not fully break down).
12. Reduce
Physics. Boil off water from a liquid to concentrate flavor and thicken. Standalone technique used within sauces, glazes, and pan sauces.
Signal. Liquid thickens to the back-of-a-spoon test; flavor intensifies.
Common failure. Reducing past the point of balance (over-concentrated, too salty), burning the sugars at the bottom of the pan (scorch ruins the whole reduction).
13. Deglaze
Physics. Add liquid to a hot pan that has held sautéed or seared food. The liquid dissolves the browned bits stuck to the pan, releasing concentrated flavor into the sauce.
Signal. The pan bottom becomes clean; the liquid darkens and thickens.
Common failure. Pan too cold (bits do not release), wrong liquid (water is weaker than wine or stock), too much liquid (dilutes what you just captured).
14. Emulsify
Physics. Combine two liquids that do not naturally mix — typically oil and water-based — into a stable suspension. Achieved mechanically (whisking, blending) plus an emulsifier (egg yolk, mustard, soy lecithin). Examples: vinaigrette, mayonnaise, hollandaise, beurre blanc.
Signal. Sauce is homogeneous and glossy; does not separate on standing for at least several minutes.
Common failure. Adding oil too fast (emulsion breaks), temperature wrong (hollandaise breaks cold or cooks to scrambled eggs), insufficient emulsifier (vinaigrette separates immediately).
15. Pickle and Ferment
Physics. Preserve by acid (pickle) or by cultivated microbial activity (ferment). Pickles are fast; true ferments (kraut, kimchi, miso, bread sourdough) are slow and require temperature control.
Signal. Pickles firm and brightly flavored; ferments gently bubble, smell tangy but not putrid, show no mold on the surface.
Common failure. Contamination (mold), wrong salt ratio (too low = spoilage, too high = no fermentation), temperature wrong (too cold = stalls, too hot = off-flavors).
16. Technique Substitution
A cook fluent in the fifteen can substitute when equipment or ingredients are missing:
Missing
Substitute
Oven for roast
Stovetop with lid (closed environment, conduction)
Grill
Broiler or cast-iron sear
Boiling water kettle
Stovetop pot
Steamer basket
Metal colander over a pot with a lid
Food processor for emulsion
Whisk (slower but works)
Braising pot
Dutch oven or heavy lidded skillet
The substitution is sound when the physics (heat transfer mode, moisture level, temperature range) is preserved, even if the equipment differs.
17. Diagnostic Questions
When a dish fails, ask in this order:
Was the technique right for the ingredient? (Tough cut requires long moist heat, not sear.)
Was the temperature in range? (Too cool, too hot, or wrong stage of the technique.)
Was the timing right? (Undercooked, overcooked, not rested.)
Was the pan right? (Wrong material or wrong size changes the heat transfer.)
Was the seasoning right? (Under-salted food tastes flat; over-salted food cannot be fixed without dilution.)
Most failures are caught at step 2 or 3.
18. Cross-References
child agent — Primary pedagogue for technique; source of the French-school framework
waters agent — Technique applied to seasonal, local ingredients
fisher-he agent — Writerly description that captures the sensory signals of correctness
nutrition-and-meal-planning skill — The plan depends on the cook being fluent in these techniques
household-systems-design skill — The kitchen that supports the techniques
19. References
Child, J., Bertholle, L., & Beck, S. (1961). Mastering the Art of French Cooking, Vol. I. Knopf.
McGee, H. (2004). On Food and Cooking: The Science and Lore of the Kitchen (2nd ed.). Scribner.
Ruhlman, M. (2009). Ratio. Scribner.
Waters, A. (2007). The Art of Simple Food. Clarkson Potter.
Ruhlman, M. (2007). The Elements of Cooking. Scribner.
