automotive-embedded-skills

name	automotive-embedded-skills
description	C/C++/CAPL best practices for automotive embedded systems. This skill should be used when writing, reviewing, or refactoring embedded C/C++ code or CAPL scripts targeting automotive ECUs, following MISRA, AUTOSAR, ISO 26262, and ISO 21434 guidelines. Triggers on tasks involving embedded firmware, CAN/CAN FD/LIN/Ethernet communication, TCP/UDP/DoIP/SOME-IP protocols, RTOS programming, safety-critical code, cybersecurity, diagnostics (UDS), CAPL test automation, or calibration toolchain integration.
license	MIT
metadata	{"author":"automotive-embedded-engineering","version":"2.0.0"}

Automotive Embedded C/C++/CAPL Best Practices

Comprehensive coding guidelines for automotive embedded software development in C, C++, and CAPL. Contains 180+ rules across 23 categories, prioritized by safety impact and industry compliance requirements (MISRA C:2012, MISRA C++:2023, AUTOSAR C++14 Classic & Adaptive, ISO 26262, ISO 21434). Covers full automotive communication stack (CAN/LIN/Ethernet/IP/TSN), cybersecurity, diagnostics, CAPL simulation/testing/fault injection, AUTOSAR BSW modules, boot/NVM/power management, compiler toolchains, static analysis tools, and CI/CD integration.

When to Apply

Reference these guidelines when:

• Writing new embedded C/C++ modules for automotive ECUs
• Implementing or reviewing CAN/LIN/Ethernet communication stacks
• Writing CAPL scripts for CANoe/CANalyzer simulation and testing
• Refactoring code for MISRA C/C++ or AUTOSAR C++14 compliance
• Designing safety-critical software (ASIL A-D per ISO 26262)
• Implementing RTOS task management and inter-task communication
• Reviewing code for memory safety, timing, and determinism
• Working with diagnostic protocols (UDS, OBD-II, DoIP)
• Implementing Automotive Ethernet (TCP, UDP, SOME/IP, DoIP, VLAN)
• Addressing cybersecurity requirements (ISO 21434, secure boot, TLS)
• Integrating with calibration/diagnostic tools (A2L, ODX, XCP)
• Optimizing for resource-constrained microcontrollers (RAM, Flash, CPU)

Rule Categories by Priority

Priority	Category	Impact	Prefix
1	Memory Safety & Management	CRITICAL	memory-
2	MISRA C/C++ Compliance	CRITICAL	misra-
3	AUTOSAR C++14 Guidelines (Classic & Adaptive)	CRITICAL	autosar-
4	Safety & Functional Safety (ISO 26262)	HIGH	safety-
5	Real-Time & Timing Constraints	HIGH	realtime-
6	Communication Protocols (CAN/LIN/Ethernet/IP/UDS)	HIGH	comm-
7	Concurrency & RTOS Patterns	MEDIUM-HIGH	rtos-
8	CAPL Scripting — CANoe	MEDIUM-HIGH	capl-canoe-
9	CAPL Scripting — vTESTstudio	MEDIUM-HIGH	capl-vtest-
10	Code Organization & Architecture	MEDIUM	arch-
11	Performance Optimization	MEDIUM	perf-
12	Build, Compilation & Static Analysis	MEDIUM	build-
13	Security & Cybersecurity (ISO 21434)	HIGH	security-
14	Testing & Verification	MEDIUM	test-
15	Tool Integration (A2L/ODX/FIBEX)	MEDIUM	integration-

Quick Reference

1. Memory Safety & Management (CRITICAL)

• memory-stack-over-heap - Prefer stack allocation over heap in embedded context
• memory-static-allocation - Use static allocation for deterministic memory usage
• memory-buffer-bounds - Always validate buffer boundaries before access
• memory-pool-pattern - Use memory pool patterns for dynamic-like allocation
• memory-no-malloc-in-rt - Never use malloc/free in real-time critical paths
• memory-raii-cpp - Use RAII for resource management in C++ embedded code
• memory-volatile-correctness - Use volatile correctly for hardware registers and shared data
• memory-alignment - Ensure proper data structure alignment for target architecture
• memory-zero-init - Always initialize variables, especially in safety-critical code

2. MISRA C/C++ Compliance (CRITICAL)

• misra-no-implicit-conversions - Avoid implicit type conversions
• misra-single-exit-point - Prefer single function exit point for critical functions
• misra-no-dynamic-memory - Avoid dynamic memory allocation (Rule 21.3)
• misra-no-recursion - Avoid recursion in embedded context (Rule 17.2)
• misra-switch-default - Always include default case in switch statements
• misra-no-goto - Avoid goto except for error cleanup patterns in C
• misra-boolean-expressions - Use explicit boolean comparisons
• misra-pointer-arithmetic - Restrict pointer arithmetic to array indexing
• misra-side-effects - Avoid side effects in conditional expressions

3. AUTOSAR C++14 Guidelines (CRITICAL)

• autosar-smart-pointers - Use smart pointers instead of raw pointers for ownership
• autosar-no-exceptions-rt - Avoid exceptions in real-time contexts, use Result types
• autosar-const-correctness - Apply const-correctness throughout interfaces
• autosar-override-final - Always use override/final for virtual function overrides
• autosar-enum-class - Use enum class instead of plain enum
• autosar-no-unions - Avoid unions, use std::variant when needed
• autosar-braces-init - Prefer braced initialization to prevent narrowing
• autosar-nodiscard - Use [[nodiscard]] for functions with important return values

4. Safety & Functional Safety - ISO 26262 (HIGH)

• safety-defensive-programming - Apply defensive programming at module boundaries
• safety-error-detection - Implement error detection and plausibility checks
• safety-redundant-checks - Use redundant checks for critical control paths
• safety-watchdog-pattern - Implement watchdog monitoring patterns
• safety-state-machine-integrity - Protect state machine transitions from corruption
• safety-crc-validation - Validate data integrity with CRC for critical data
• safety-safe-state - Always define and reach safe state on failure
• safety-asil-decomposition - Follow ASIL decomposition patterns correctly

5. Real-Time & Timing Constraints (HIGH)

• realtime-deterministic-execution - Ensure deterministic execution time in cyclic tasks
• realtime-wcet-awareness - Design with WCET (Worst-Case Execution Time) in mind
• realtime-no-blocking-isr - Never block in interrupt service routines
• realtime-priority-inversion - Prevent priority inversion with proper locking
• realtime-cyclic-scheduling - Follow cyclic scheduling patterns correctly
• realtime-interrupt-latency - Minimize interrupt latency and ISR execution time
• realtime-deadline-monitoring - Implement deadline monitoring for critical tasks

6. Communication Protocols (HIGH)

CAN / LIN Bus:

• comm-can-message-layout - Follow proper CAN/CAN FD message layout and DBC conventions
• comm-can-error-handling - Handle CAN bus-off recovery and error frames
• comm-can-fd-handling - Handle CAN FD extended data length and bit rate switching
• comm-lin-schedule-table - Implement LIN schedule tables and response handling
• comm-signal-timeout - Implement signal timeout monitoring with default values
• comm-network-management - Follow NM (Network Management) state machine correctly

Automotive Ethernet / IP Stack:

• comm-tcp-socket-lifecycle - Manage TCP socket lifecycle (connect, keepalive, graceful shutdown)
• comm-udp-datagram-handling - Handle UDP datagrams for service discovery and streaming
• comm-doip-implementation - Implement Diagnostics over IP (ISO 13400) activation and routing
• comm-arp-table-management - Manage ARP tables and static ARP entries for deterministic networks
• comm-icmp-handling - Handle ICMP for network diagnostics and reachability detection
• comm-vlan-qos-priority - Configure VLAN tagging and QoS priority mapping (IEEE 802.1Q)
• comm-dhcp-autoip - Implement IP address assignment (DHCP client, AutoIP fallback)
• comm-someip-serialization - Use correct SOME/IP serialization for service-oriented communication
• comm-someip-sd - Implement SOME/IP Service Discovery (offer, find, subscribe)

Diagnostics & Routing:

• comm-uds-service-handler - Implement UDS diagnostic services with proper NRC handling
• comm-gateway-routing - Implement proper message routing in gateway ECUs

7. Concurrency & RTOS Patterns (MEDIUM-HIGH)

• rtos-task-design - Design tasks with single responsibility and proper priority
• rtos-critical-section - Minimize critical section duration
• rtos-mutex-pattern - Use mutexes correctly, avoid nested locking
• rtos-message-queue - Prefer message queues over shared memory for inter-task communication
• rtos-no-priority-inversion - Use priority inheritance or ceiling protocols
• rtos-isr-to-task - Defer ISR processing to task context via flags/queues
• rtos-stack-sizing - Size task stacks correctly with safety margin

8. CAPL Scripting — CANoe (MEDIUM-HIGH)

• capl-canoe-message-handler - Structure message handlers for readability and performance
• capl-canoe-timer-pattern - Use timer patterns correctly for cyclic and one-shot operations
• capl-canoe-test-structure - Structure test cases with proper setup/teardown/verification
• capl-canoe-signal-access - Access signals via database symbols, not raw byte manipulation
• capl-canoe-error-frame-handling - Handle error frames and bus-off conditions in simulation
• capl-canoe-environment-variables - Use environment variables for panel interaction correctly
• capl-canoe-diagnostic-testing - Implement diagnostic request/response testing patterns
• capl-canoe-node-simulation - Design node simulation with proper state machines
• capl-canoe-multi-channel - Multi-channel bus simulation (CAN+CAN, CAN+LIN, CAN+ETH)
• capl-canoe-rbs-cyclic - Cyclic Rest Bus Simulation with counter/CRC generation
• capl-canoe-rbs-reactive - Reactive RBS with Interaction Layer and state-dependent responses
• capl-canoe-gateway-routing - Gateway simulation with signal/PDU/cross-protocol routing

8b. CAPL — Shared Patterns (MEDIUM-HIGH)

• capl-signal-manipulation - Reusable signal manipulation library (ramp, sine, noise, step, sequence)

8c. CAPL — Fault Injection (HIGH)

• capl-fault-can - CAN/CAN FD fault injection (error frames, bus-off, signal stuck, timing)
• capl-fault-lin - LIN fault injection (checksum, no-response, header, timing)
• capl-fault-eth - Ethernet fault injection (link down, packet loss, latency, corruption)

8d. CAPL — External Integration (MEDIUM)

• capl-ext-dll-integration - CAPL DLL API, data exchange, thread safety, 32/64-bit
• capl-ext-com-python - CANoe COM automation via Python
• capl-ext-com-csharp - CANoe COM automation via C#
• capl-ext-ci-cd - CI/CD integration (Jenkins, GitLab CI, headless execution)

9. Code Organization & Architecture (MEDIUM)

• arch-hal-abstraction - Use Hardware Abstraction Layer for portability
• arch-module-interface - Design clean module interfaces with information hiding
• arch-state-machine - Implement state machines with table-driven or state-pattern approach
• arch-callback-pattern - Use callback patterns for decoupling layers
• arch-config-separation - Separate configuration from logic (calibration parameters)
• arch-layered-architecture - Follow layered architecture (MCAL, ECU-AL, BSW, SWC)

10. Performance Optimization (MEDIUM)

• perf-loop-optimization - Optimize loop constructs for embedded targets
• perf-lookup-table - Use lookup tables instead of runtime computation
• perf-bitwise-operations - Use bitwise operations for flag and register manipulation
• perf-cache-friendly - Organize data for CPU cache efficiency
• perf-inline-critical - Inline small, critical functions
• perf-fixed-point - Use fixed-point arithmetic instead of floating-point when possible
• perf-dma-usage - Use DMA for bulk data transfers

11. Build, Compilation & Static Analysis (MEDIUM)

• build-warnings-as-errors - Treat all compiler warnings as errors
• build-static-analysis - Integrate static analysis (PC-lint, Polyspace, Coverity)
• build-compiler-flags - Use appropriate compiler flags for safety and optimization
• build-link-time-optimization - Use LTO for cross-module optimization
• build-reproducible-builds - Ensure reproducible builds for traceability

12. Testing & Verification (MEDIUM)

• test-unit-test-pattern - Structure unit tests for embedded C/C++ (Unity, Google Test)
• test-mock-hardware - Mock hardware dependencies for testability
• test-boundary-values - Test boundary values and edge cases systematically
• test-coverage-targets - Meet code coverage targets per ASIL level
• test-integration-testing - Design integration tests for inter-module communication
• test-hil-sil-pattern - Structure HIL/SIL test patterns for verification

13. Security & Cybersecurity — ISO 21434 (HIGH)

• security-secure-boot - Implement secure boot chain verification
• security-secure-communication - Use TLS/DTLS for in-vehicle Ethernet communication
• security-key-management - Handle cryptographic keys with proper storage and rotation
• security-secure-diagnostics - Implement secure UDS authentication (0x29 service)
• security-input-sanitization - Sanitize all external inputs (CAN, Ethernet, diagnostic)
• security-secure-update - Implement secure OTA/reflash with signature verification
• security-access-control - Enforce access control between security domains
• security-crypto-usage - Use cryptographic primitives correctly (AES, HMAC, CMAC)

14. MISRA Grouped Topics (CRITICAL)

• misra-type-system - Essential type model, implicit conversions, type casting (Rules 10-11)
• misra-control-flow - Switch, goto, unreachable code, single exit (Rules 15-16)
• misra-pointer-safety - Pointer arithmetic, null checks, conversions (Rules 18, 11)
• misra-declarations - Variable scope, linkage, storage class (Rules 8)
• misra-expressions - Side effects, precedence, boolean, sizeof (Rules 12-14)
• misra-functions - Prototypes, parameters, return values, recursion ban (Rules 17)
• misra-preprocessor - Macro safety, include guards, conditional compilation (Rules 20)
• misra-standard-library - Banned functions, restricted headers (Rules 21-22)
• misra-initialization - Variable/array/struct initialization (Rules 9)
• misra-memory-model - Volatile, atomic access, memory barriers (Rules 19)
• misra-concurrency - Thread safety, shared data access (Amendment 4)
• misra-deviation-process - Deviation documentation, approval, common patterns

15. AUTOSAR Classic BSW Modules (HIGH)

• autosar-classic-ecum - EcuM startup/shutdown, sleep/wakeup
• autosar-classic-bswm - BswM mode arbitration, action lists
• autosar-classic-com - COM signal packing, transmission modes
• autosar-classic-pdu-router - PDU Router routing paths, gateway
• autosar-classic-dcm-dem - Dcm/Dem diagnostics, DTC management
• autosar-classic-nvm - NvM block configuration, CRC, read/write
• autosar-classic-os - AUTOSAR OS tasks, ISRs, resources, alarms
• autosar-classic-canif-cantp - CanIf/CanTp callbacks, flow control

16. AUTOSAR Adaptive ara:: APIs (HIGH)

• autosar-adaptive-ara-com - ara::com proxy/skeleton, service discovery
• autosar-adaptive-ara-core - ara::core Result<T,E>, ErrorCode, Future
• autosar-adaptive-ara-exec - ara::exec process lifecycle, function groups
• autosar-adaptive-ara-diag - ara::diag diagnostic services
• autosar-adaptive-ara-log - ara::log logging patterns
• autosar-adaptive-ara-phm - ara::phm health management, supervision
• autosar-adaptive-ara-per - ara::per persistency, key-value storage

17. ECU Boot Sequence (HIGH)

• boot-baremetal-startup - Bare-metal boot: startup → C runtime → main
• boot-autosar-classic-startup - Classic AUTOSAR EcuM/BswM boot
• boot-autosar-adaptive-startup - Adaptive Execution Manager boot
• boot-bootloader-reprogramming - UDS flash download sequence
• boot-secure-boot-chain - Secure boot with HSM verification

18. NVM Management (HIGH)

• nvm-autosar-block-config - AUTOSAR NvM blocks, CRC, redundancy
• nvm-fee-ea-abstraction - Fee/Ea Flash EEPROM Emulation
• nvm-baremetal-flash - Bare-metal Flash/EEPROM patterns
• nvm-wear-leveling - Wear leveling strategies for automotive lifetime

19. Power Management (MEDIUM)

• power-ecum-sleep-wakeup - EcuM sleep/wakeup state machine
• power-partial-networking - Partial networking, selective transceiver wakeup
• power-bswm-shutdown - BswM ordered shutdown action lists
• power-clock-peripheral - Clock gating and peripheral power-down
• power-low-power-modes - MCU low-power modes (SLEEP, STANDBY, STOP)

20. Automotive Ethernet Deep-Dive (HIGH)

• eth-tsn-time-sync - TSN time synchronization (IEEE 802.1AS / gPTP)
• eth-tsn-traffic-shaping - TSN traffic shaping (IEEE 802.1Qbv)
• eth-tsn-stream-filtering - TSN stream filtering (IEEE 802.1Qci)
• eth-switch-configuration - Automotive Ethernet switch configuration
• eth-avb-streaming - AVB Audio/Video streaming

21. Compiler & Static Analysis (HIGH)

• build-gcc-warnings - GCC warning flags for automotive
• build-clang-analysis - Clang-Tidy and Clang Static Analyzer
• build-greenhills-safety - GreenHills safety-qualified compiler
• analysis-pclint-config - PC-lint MISRA configuration
• analysis-polyspace - Polyspace Bug Finder / Code Prover
• analysis-coverity - Coverity embedded checkers
• analysis-cppcheck - cppcheck with MISRA addon
• analysis-parasoft - Parasoft C/C++test
• analysis-ldra - LDRA traceability and coverage

22. vTESTstudio CAPL (MEDIUM-HIGH)

• capl-vtest-test-unit - Test unit/group/fixture structure
• capl-vtest-data-driven - Data-driven testing with parameters
• capl-vtest-xml-module - XML test module integration
• capl-vtest-verdict-reporting - Verdict and reporting patterns
• capl-vtest-stimulus-response - Stimulus/response timing validation

23. Tool Integration (MEDIUM)

• integration-a2l-calibration - Generate and maintain A2L/ASAP2 calibration descriptions
• integration-odx-diagnostic - Structure ODX/PDX diagnostic descriptions correctly
• integration-fibex-network - Maintain FIBEX network description files
• integration-dbc-arxml-sync - Keep DBC/ARXML and code signal definitions synchronized
• integration-xcp-calibration - Implement XCP (Universal Measurement and Calibration Protocol)
• integration-autosar-arxml - Generate and parse AUTOSAR ARXML configuration correctly

How to Use

Read individual rule files for detailed explanations and code examples:

rules/memory-stack-over-heap.md
rules/misra-no-recursion.md
rules/capl-message-handler.md

Each rule file contains:

• Brief explanation of why it matters in automotive embedded context
• Incorrect code example with explanation
• Correct code example with explanation
• Relevant standard references (MISRA, AUTOSAR, ISO 26262)
• Additional context and impact on safety/performance

Full Compiled Document

For the complete guide with all rules expanded: AGENTS.md