woz

name	woz
description	WOZCODE utilities. Subcommands — login, logout, status, settings, update, share, review (deep multi-persona code review), benchmark (WOZCODE vs vanilla comparison). Invoke as `/woz <subcommand>`, e.g. `/woz login` or `/woz review`.
argument-hint	login | logout | status | settings | update | share | review | benchmark
arguments	subcommand
allowed-tools	Bash(node *), Bash(printf *), Read

/woz — WOZCODE utilities

One skill, eight subcommands. The first word of the arguments selects the subcommand:

Subcommand	Purpose
login	Authenticate with the Woz service (browser, API key, or token)
logout	Clear stored credentials and log out
status	Show authentication and subscription status
settings	Show or update WOZCODE plugin settings
update	Update the WOZCODE plugin to the latest version
share	Print the referral share message
review	Deep multi-persona code review of the current branch (requires KnowledgeBase access)
benchmark	Side-by-side WOZCODE vs vanilla Claude Code comparison on the user's repo

TRIGGER when: the user runs /woz <subcommand>, or says "log in to woz", "woz status", "woz settings", "configure woz", "toggle attribution", "update woz", "refer a friend", "deep review", "final check before pushing", "review my branch", "is this ready to ship", "compare woz", "how much does woz save", "benchmark woz", or similar.

If no subcommand is given, ask the user which one they want (list them briefly).

Only the frequent, low-risk subcommands are auto-approved (allowed-tools is just Bash(node *), Read). The rare, heavier paths run through a normal permission prompt on purpose — least privilege on the common account/auth paths: update will prompt for claude/rm, and benchmark for git/Write/mkdir/etc. Approve those when the user runs them.

login

Dispatch on the arguments after the subcommand:

• Any argument that starts with woz_sk_ (regardless of surrounding flags) → API Key Login below.
• --token <token> → Token Login below.
• Otherwise → Browser Login.

Browser Login (Preferred)

Run the Woz authentication flow. This opens a browser for the user to log in:

node --no-warnings=ExperimentalWarning ${CLAUDE_PLUGIN_ROOT}/scripts/wozcode-cli.cjs login

If the command exits with code 0, login succeeded — confirm to the user.

API Key Login

Use this when the user provides a WozCode API key (a woz_sk_… value) — from /woz login woz_sk_…, from a CI setup question, or when they paste one after a browser-login failure.

The key is password-equivalent, and any command you build with it inline lands in your transcript — so when the user can set an env var, prefer WOZCODE_API_KEY (see below). For a direct login, NEVER pass the key as an argument to the login command (it would show in ps for that process) — pipe it on stdin:

printf %s '<api-key>' | node --no-warnings=ExperimentalWarning ${CLAUDE_PLUGIN_ROOT}/scripts/wozcode-cli.cjs login --api-key-stdin

Replace <api-key> with the actual key, single-quoted. Do not echo the key back to the user in your response.

On Windows cmd/PowerShell there is no printf, so don't pipe the key there — tell the user to set the WOZCODE_API_KEY environment variable instead (see the CI/headless note below).

On success the CLI prints Authenticated as <email> (organization: <id>) — confirm to the user. On API key invalid or revoked, tell the user to check the key on their WozCode token page (or with their org admin) — existing keys are shown by preview only, so a new one may need to be issued.

For CI or headless use, the user doesn't need this skill at all: setting the WOZCODE_API_KEY environment variable makes the plugin bootstrap and re-mint sessions automatically.

Token Login

Use this when:

• The user passed --token <token> as arguments to this skill
• The browser login above timed out or failed and the user provides a token

If the browser login failed:

1. The auth URL is visible in the output above
2. Tell the user to open that URL in their browser and complete the login
3. Ask the user to copy the token shown on the auth page after login

Once you have the token (from args or from the user), run:

node --no-warnings=ExperimentalWarning ${CLAUDE_PLUGIN_ROOT}/scripts/wozcode-cli.cjs login --token '<token>'

Replace <token> with the actual token.

Confirm success or relay any error to the user.

logout

Log out of Woz by clearing stored credentials:

node --no-warnings=ExperimentalWarning ${CLAUDE_PLUGIN_ROOT}/scripts/wozcode-cli.cjs logout

Confirm that the user has been logged out.

status

Check the current Woz authentication status:

node --no-warnings=ExperimentalWarning ${CLAUDE_PLUGIN_ROOT}/scripts/wozcode-cli.cjs status

Relay the output to the user. Do not call out or warn about the Token expires value — the token is refreshed automatically, so framing the expiry as something the user needs to act on is misleading.

settings

Manage WOZCODE plugin settings. The user-facing knobs (attribution, status line, spinner verbs, the live-reviewer toggles, …) live in ~/.claude/settings.json under the wozcode key. Prefer the --show / --set helper below over hand-editing — it applies the right side effects.

Show current settings

node --no-warnings=ExperimentalWarning ${CLAUDE_PLUGIN_ROOT}/scripts/settings-helper.cjs --show

Display the JSON output as a readable table for the user.

Update a setting

node --no-warnings=ExperimentalWarning ${CLAUDE_PLUGIN_ROOT}/scripts/settings-helper.cjs --set <key> <value>

Where <key> is a setting name and <value> is true or false (or, for sql, a JSON policy object — see The sql connection policy below).

Available settings:

Key	Default	Description
attribution	true	Co-Authored-By on commits + PR badge
statusLine	true	Master toggle for the WOZCODE status line
statusLineSession	true	Show session savings in status line
statusLineLifetime	true	Show lifetime savings in status line
statusLineTips	true	Show quick tips in status line
statusLineShare	true	Show /woz share referral hint in status line
spinnerVerbs	true	WOZ-themed spinner verbs
alwaysLoadTools	true	Load WOZCODE MCP tools up-front instead of deferring them behind ToolSearch
postCompactionDigest	true	After a compaction, recall the facts it dropped so the model doesn't silently lose them. Takes effect immediately.
autoSessionTitle	true	Name the session after its first prompt instead of woz:code — shows in the terminal tab and /resume. Takes effect on the next prompt.
syntaxValidation	true	Post-edit syntax warnings in the Edit tool (tree-sitter / TypeScript / JSON / YAML / HTML). Takes effect immediately. Per-repo override: .wozcode.json {"features": {"syntaxValidation": false}}.
liveReviewer	false	Live PostToolUse reviewer (runs on every Edit)
liveReviewerModel	(live-pass default)	Model id for the live pass. Unknown ids fall back to the default.

Runtime-gated on KB access: the live-reviewer knobs (liveReviewer, liveReviewerModel, deepEditCountReviewer, deepEditCountInterval, wozReviewModel) ship in every build but are gated on the org's KnowledgeBase-access entitlement at runtime — --show omits them and --set rejects them when the org isn't entitled. Treat the --show output as authoritative and don't offer to set a key it doesn't list.

The KnowledgeBase backend settings (knowledgeBaseProvider, knowledgeBaseServerUrl) and reviewerBaseUrl are internal/infra and are not surfaced by --show for now.

The sql connection policy

sql gates which databases the Sql tool may connect to. Unlike the toggles above it is a structured JSON object, not true/false. Absent = every connection allowed (no change). Set it wholesale — there is no per-field patch; build the full object and pass it as one JSON value.

node --no-warnings=ExperimentalWarning ${CLAUDE_PLUGIN_ROOT}/scripts/settings-helper.cjs --set sql '{"deny":["remote"]}'

Clear it (allow every connection again) with any of none / off / clear / null:

node --no-warnings=ExperimentalWarning ${CLAUDE_PLUGIN_ROOT}/scripts/settings-helper.cjs --set sql none

Policy shape — default plus allow/deny lists of matchers, evaluated deny > allow > default (default is allow when omitted):

• "local" / "remote" — by scope. sqlite/duckdb files are always local; postgres/mysql are local only for loopback hosts (localhost, 127.0.0.1, ::1, unix socket). An unparseable DSN is treated as remote.
• { "dialect": "postgres" } or { "dialect": ["postgres", "mysql"] } — by dialect.
• { "host": "*.rds.amazonaws.com" } — by host glob (* wildcard, case-insensitive).
• Fields in one object are AND-ed; an empty {} matches nothing.

Examples:

• Block the isolated remote DB, keep local DBs usable: {"deny":["remote"]}
• Lock down to local only (whitelist): {"default":"deny","allow":["local"]}
• Block one host: {"deny":[{"host":"*.rds.amazonaws.com"}]}
• Allow ONLY one database, deny all else: {"default":"deny","allow":[{"dialect":"postgres","host":"*.eks-analytics.us-east-1.rds.amazonaws.com"}]}

When building a single-database whitelist, two things trip people up: default:"deny" also blocks local sqlite/duckdb files (add "local" to allow to keep them), and reaching the DB through a localhost port-forward tunnel classifies as local, not the RDS host — so it won't match the host glob. Full walk-through and caveats: docs/sql-connection-policy.md.

A blocked connection returns an error naming the wozcode.sql policy and never opens a socket or leaks credentials. Changes take effect on the next Sql tool call — no restart.

DuckDB first-use download

DuckDB runs by spawning the duckdb CLI. It uses a duckdb on PATH (≥1.2) or WOZ_DUCKDB_CLI_PATH; otherwise the pinned CLI (~20 MB) downloads once on the first Sql call to a duckdb: connection — retry after ~30–60 s and the query runs. WOZ_NO_DUCKDB_INSTALL=1 disables the download. Full setup + cache paths: docs/sql-connection-policy.md.

About alwaysLoadTools

Claude Code can either load an MCP server's tool schemas into every session up-front, or defer them — in which case the model has to call the built-in ToolSearch tool once before it can use them.

• true (default): WOZCODE's tools (Search, Edit, Sql, Bash) are available immediately on every session. Best UX — the model uses them on the first turn without an extra discovery step.
• false: Tool schemas are deferred. Saves a small amount of system-prompt tokens per session, useful if you start lots of short sessions where you don't end up using WOZCODE's tools. The model will call ToolSearch to load them on first use.

Only affects WOZCODE's MCP server (code). Other MCP servers in your config are not touched.

Changes to this setting take effect on the next Claude Code launch because .mcp.json is read at startup, before session hooks run.

After updating settings, tell the user:

• Most changes take effect immediately
• For statusLine, attribution, and spinnerVerbs: take effect immediately, no restart needed
• For alwaysLoadTools: tell them to restart Claude Code for the change to take effect (the helper already prints this reminder)
• For postCompactionDigest: takes effect immediately (no restart needed)

update

Update the WOZCODE plugin to the latest version. Run these steps in sequence; after each bash command, check the exit code before proceeding.

Step 1: Update marketplace

Try the update first:

claude plugin marketplace update wozcode-marketplace

If this fails (e.g. git/SSH auth error), fall back to adding via HTTPS, then removing the old entry:

claude plugin marketplace add https://github.com/WithWoz/wozcode-plugin.git

If the add succeeded, remove the old SSH-based entry:

claude plugin marketplace remove wozcode-marketplace

If the add failed, do NOT run remove — the old marketplace entry is still needed. Tell the user: "Marketplace update failed. Check your network connection and try again."

Step 2: Update plugin to latest version

claude plugin update woz@wozcode-marketplace

update force-upgrades an already-installed plugin. install is a no-op when an entry already exists in installed_plugins.json, so it will not upgrade.

If update fails, fall back to:

claude plugin install woz@wozcode-marketplace

If both fail, tell the user: "Plugin update failed. Please report this issue at https://github.com/WithWoz/wozcode-plugin/issues"

Step 3: Clear update flag and confirm

rm -f "${CLAUDE_CONFIG_DIR:-$HOME/.claude}/wozcode/update-available.json"

After all steps succeed, tell the user:

• ✅ WOZCODE updated successfully
• Run /reload-plugins to load the update into this session, or restart Claude Code — a running session keeps the old version until then

share

Print the user's WOZCODE referral share message:

node --no-warnings=ExperimentalWarning ${CLAUDE_PLUGIN_ROOT}/scripts/wozcode-cli.cjs share

Relay the full output to the user. Do not summarize or modify it.

review

Run WozPairProgrammer's deep, before-pushing reviewer on the user's current branch. Reviews the full diff vs base (committed + staged + working + untracked) by fanning out to seven narrow-lens reviewer personas in parallel (cross-file consistency, duplication & DRY, codebase reuse & schema-family, type safety, SDK/library type reuse, correctness & edge cases, comment & docs hygiene), followed by a sequential wide-lens cross-cutting pass that sees the narrow personas' findings as priors. Each persona gets pre-fetched knowledge-base context, personal-curation notes, and the relevant slice of CLAUDE.md. Requires KnowledgeBase access (the CLI enforces this and exits with a clear message if the org isn't entitled).

1. Parse user-supplied flags

Defaults if none specified: read-only (no auto-patch; findings are presented, the user decides) and markdown report rendered in the conversation (no file written).

Flags to recognize:

• --save — also write the report to .wozcode/reviews/<branch>-<timestamp>.md.
• --apply — auto-apply high-confidence patch findings (like the live reviewer).
• --interactive — emit findings, then ask the user which to apply.
• --personas <list> — comma-separated subset of persona ids: consistency, duplication, codebase-reuse, type-safety, sdk-types, correctness, comments, cross-cutting. Defaults to all eight.
• --model <id> — override the model (defaults to your current model, or the pinned wozcode.wozReviewModel setting). Pass a cheaper model id if cost matters more than capability for this run.
• --repo <path> — target a different worktree. Defaults to the session's cwd.

If the user is unclear, default to read-only + markdown.

2. Invoke the reviewer CLI

Run WITHOUT 2>/dev/null or any stderr redirect — the CLI streams progress lines to stderr so the user sees activity during the wait. Stdout carries the final markdown report.

node --no-warnings=ExperimentalWarning ${CLAUDE_PLUGIN_ROOT}/scripts/woz-review.cjs [--save] [--apply] [--interactive] [--personas <comma-separated-ids>] [--model <id>] [--repo <path>]

If this fails with a module-not-found error for woz-review.cjs, this is a reviewer-free build — tell the user the deep review requires KnowledgeBase access and stop. (Released builds always include the reviewer; the CLI itself reports a clean message when the org simply isn't entitled.)

3. Present the report — PRINT IT VERBATIM, FIRST THING

MANDATORY: the FIRST content of your assistant response after this CLI returns MUST be the CLI's complete stdout output, copied verbatim. No preamble, no summary, no editorial framing. Just the markdown report itself, full text, exactly as the CLI printed it. The report already starts with a # WozPairProgrammer Deep Review heading and self-describes its sections. Do not paraphrase, abridge, or replace it with a summary — prior dogfood showed the report often gets compressed to a one-line summary that silently drops every actionable finding.

After the verbatim report, you MAY add: one short line if --save was used noting where the file was written; if --interactive was used, a follow-up asking which numbered findings to apply. Otherwise stay silent. Do not editorialize or restate the findings — the reviewer's wording is the wording.

4. Applying findings

If the user replies with "fix", "apply", "do them", "fix all", or names specific finding numbers ("apply 1, 3"), THEN — and only then — execute the patches by calling the woz-edit tool with the patch payloads from the report's ### N. 🔧 Edit blocks (exact oldString / newString). Otherwise don't apply anything; the report is read-only by default.

Review tips

• The reviewer runs against the knowledge base at ~/.woz/knowledge-base/repo/<owner__repo>/kb/. If it hasn't been built for this repo, the reviewer still works but has no PR/code-history context — mention this once if so.
• Costs model tokens per run (typically several dollars on a moderately sized branch; 6× the single-pass cost but parallel, so wall time is comparable). Each persona has its own 10-turn budget.
• The branch diff includes uncommitted changes — the user can run /woz review mid-edit, not just before push.
• Personal-overlay notes (added via /woz-kb note "...") get pre-fetched into the matching personas' prompts.

benchmark

Run a side-by-side comparison of WOZCODE vs vanilla Claude Code on the user's own codebase. Each prompt runs twice against a fresh copy of the repo with git reset --hard between runs, so the target MUST be a clean git repo.

Prerequisites

• User logged in to WOZCODE (if not, stop and ask them to run /woz login).
• Target directory is a git repo with a clean working tree.

1. Gather inputs — BE BRIEF

Ask for all three in ONE short message (< 10 lines). Do not re-explain what the benchmark does — the user already invoked it.

1. Target directory — absolute path to a clean git repo to run the test on.
2. Prompts — 2–10 real coding tasks. Tell them briefly: "meaty feature/refactor/bugfix work, not one-liners — trivial prompts hide WOZCODE's advantage". If they don't have prompts in mind, offer to suggest some after looking at their repo.
3. Environment setup (optional) — one line: "Anything Claude needs already in place (DB seeded, services running, credentials in .env)? Skip if the repo is self-contained."

Do NOT ask about the model, and do NOT put a model: line in the YAML config — the harness picks the default. Only add one if the user volunteers a model in their answer.

Keep examples OUT of the user message unless they ask for help picking prompts.

2. Resolve the repo under test (url + pinned sha)

The harness does NOT mutate a local checkout in place. Instead it clones a git remote at a pinned commit into a scratch work-dir, so the config needs a baseRepo: { url, sha }. Derive both from the target repo:

test -d <target>
git -C <target> rev-parse --git-dir
git -C <target> remote get-url origin      # -> baseRepo.url
git -C <target> rev-parse HEAD             # -> baseRepo.sha

The pinned sha MUST be reachable on the remote (the harness clones url and checks out sha). If HEAD is a local-only commit, tell the user to push it first, or pick an already-pushed sha. If the repo has no origin remote, STOP and ask the user for the git URL to benchmark against.

3. Write a temporary benchmark config

Derive a cross-platform scratch base path (node is already required to run the harness; /tmp and date +%s do not exist on Windows):

node -e "console.log(require('path').join(require('os').tmpdir(),'woz-benchmark-'+Date.now()))"

Use the Write tool to create a YAML file at <base>.yaml. Format:

baseRepo:
  url: "<origin url from step 2>"
  sha: "<pinned HEAD sha from step 2>"
prompts:
  - "first prompt from the user"
  - "second prompt from the user"
setup:
  commands:
    - "curl -L https://example.com/dataset.csv -o data/sample.csv"
    - "psql $DATABASE_URL -f seed.sql"

Notes:

• baseRepo.url and baseRepo.sha are both required.
• Quote every prompt string. If a prompt contains a double quote, escape it with \".
• Omit the entire setup: block if the user didn't give any environment setup commands.

4. Run the benchmark

Use <base>-work from step 3 as --work-dir — the repo is cloned there, NOT into the user's checkout. One-line warning: "This'll take several minutes — each prompt runs twice." Then run:

node --no-warnings=ExperimentalWarning "${CLAUDE_PLUGIN_ROOT}/scripts/benchmark.cjs" --work-dir "<scratch-dir>" --config "<yaml-path>" --user-env

--user-env loads the user's project CLAUDE.md hierarchy on BOTH sides. Do NOT pass --screenshots, --codex, or --judge.

5. Present the results as a savings report

The benchmark prints a detailed text report at the end. Relay the full report to the user, then add a clear, sales-oriented savings summary at the top. Compute the deltas from the report's totals:

💰 WOZCODE Savings Summary
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
  Cost saved:       $X.XX  (Y% cheaper)
  Tokens saved:     X,XXX  (Y% fewer)
  Turns saved:      N      (Y% fewer)
  Time saved:       X min  (Y% faster)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Frame the numbers positively. If WOZCODE was slower or more expensive on a specific prompt, call it out honestly but note the aggregate. Finally, tell the user where the detailed JSON report was saved (the benchmark prints this path).

Benchmark tips

• If the user has no prompts in mind, read a few files in their repo and suggest 2-3 realistic tasks tailored to what you see.
• The temp YAML file and the --work-dir scratch clone are safe to leave in the OS temp dir — it is cleaned up periodically. The user's own checkout is never touched.
• The benchmark clones baseRepo.url at the pinned baseRepo.sha, so uncommitted or unpushed local work is NOT included — push it first if it should be part of the run.