oma-deepsec

name

oma-deepsec

description

Drive Vercel's `deepsec` agent-powered vulnerability scanner end-to-end: installing the `.deepsec/` workspace, bootstrapping `INFO.md`, running cost-aware `scan` / `process` / `triage` / `revalidate` / `export` passes, gating PRs with `process --diff`, writing custom matchers, and triaging findings. Use whenever the user mentions deepsec, asks an agent to scan a repo for vulnerabilities, runs into `pnpm deepsec` / `bunx deepsec` commands, wants a CI-based PR security review, sees a `.deepsec/` directory, or asks about `INFO.md` / matchers / `process --diff` / `revalidate`, even when the tool name is not spoken. Deepsec scans are expensive (a single full scan can cost hundreds to tens of thousands of dollars) so the skill exists in part to keep the user from getting surprised.

Deepsec: Agent-Powered Vulnerability Scanner Driver

Scheduling

Goal

Operate Vercel's deepsec security scanner inside a target repository safely and cost-consciously: bootstrap the .deepsec/ workspace, write a tight INFO.md, run the right scan/process/triage/revalidate/export sequence, gate PRs in CI via process --diff, and grow project-specific matchers, surfacing real, revalidated findings without runaway spend.

Intent signature

• User mentions deepsec, "deep security scan", bunx deepsec, pnpm deepsec, npx deepsec.
• User asks an agent to scan a repository for vulnerabilities, security issues, or CVEs and the project has (or should have) a .deepsec/ directory.
• User asks how to add a deepsec PR / CI security gate, or about process --diff, --diff-staged, --diff-working, --files-from, --comment-out.
• User mentions deepsec artefacts: INFO.md, SETUP.md, data/<id>/files/, FileRecord, RunMeta, revalidation, triage, custom matchers, MatcherPlugin, noiseTier, priorityPaths.
• User asks about deepsec configuration: deepsec.config.ts, defaultAgent, AI_GATEWAY_API_KEY, VERCEL_OIDC_TOKEN, AI Gateway, Vercel Sandbox, --agent codex, --agent claude.
• User asks how to lower deepsec cost, cut false-positive rate, or interpret severity / triage / revalidation verdicts.

When to use

• First-time deepsec install in a repo (init, INFO.md write, first calibration scan).
• Running a full or scoped scan and processing findings.
• Setting up a per-PR CI gate with process --diff and --comment-out.
• Writing a project-specific matcher to cover entry points the default set misses.
• Triaging a backlog of findings (severity bucketing, FP cuts via revalidate, exporting to issue tracker).
• Diagnosing deepsec failures: missing credentials, AI Gateway quota stops, refusals, sandbox auth.

When NOT to use

• Generic OWASP / lint-style review without deepsec → use oma-qa.
• Generic CVE / dependency advisories → use oma-qa or oma-search.
• Architecting a brand-new SAST pipeline that is not deepsec → use oma-architecture.
• Writing or auditing application code itself → route to oma-backend / oma-frontend / oma-mobile.
• Cloud / IAM / Terraform hardening → use oma-tf-infra (deepsec only scans the IaC; remediation lives there).
• Pure reasoning about a finding's fix in product code → use oma-debug once deepsec has produced the finding.

Expected inputs

• target_repo_root: absolute path of the codebase to scan (parent of .deepsec/).
• intent: one of setup | scan | pr-review | matchers | triage | config | troubleshoot.
• credential_mode: ai-gateway-key | vercel-oidc | direct-anthropic | direct-openai | subscription.
• agent_choice: codex (upstream default; model gpt-5.5) or claude (model claude-opus-4-8). Asked once before the first paid call if not already provided.
• severity_floor: lowest severity worth surfacing (typically HIGH).
• Optional: existing .deepsec/data/<id>/, deepsec.config.ts, custom matchers, CI provider.

Expected outputs

• A working .deepsec/ workspace registered against the target repo.
• A populated data/<id>/INFO.md (50-100 lines, project-specific, no line numbers).
• One or more completed scan → process (→ triage/revalidate) runs with reproducible cost notes.
• For PR mode: a CI workflow file using process --diff <base> with two-job split (no PR-write in PR-code job).
• For matchers: new .deepsec/matchers/<slug>.ts files wired through the inline plugin in deepsec.config.ts.
• A findings export (md-dir and/or json) plus a short summary of top severities and FP-rate notes.
• Explicit, dollar-and-time-bounded plan before any pass that may cost more than ~$25.

Dependencies

• Node.js 22+, plus a package manager: bun / bunx (preferred in this monorepo), pnpm, npm, or yarn.
• A working AI credential: AI_GATEWAY_API_KEY=vck_…, or VERCEL_OIDC_TOKEN, or direct ANTHROPIC_AUTH_TOKEN + ANTHROPIC_BASE_URL, or a logged-in claude / codex CLI subscription.
• Git (history is consulted by revalidate and --diff modes).
• Optional: Vercel Sandbox auth for deepsec sandbox … distributed runs.
• Reference resources under resources/ (loaded only when the scenario requires them).

Control-flow features

• Branches by intent (setup vs scan vs pr-review vs matchers vs triage vs config vs troubleshoot).
• Branches by repo size (calibrate with --limit 50 before any large pass).
• Branches by credential source (gateway key, OIDC, direct, subscription).
• Stops on quota / credit exhaustion and resumes the same command after top-up.
• Refuses to launch an unbounded process when no calibration has been done and the repo is large.
• Reads codebase, writes .deepsec/ files and CI configs, runs long-lived AI processes.

Structural Flow

Entry

1. Confirm whether .deepsec/ already exists; if yes, treat the run as incremental, never re-init.
2. Resolve intent from the user prompt; if ambiguous (e.g. "scan this repo"), default to setup then scan (calibration mode).
3. Estimate scale: count source files (rough rg --files | wc -l excluding node_modules, .git, dist) to forecast cost before any AI pass.
4. Check for an AI credential in .env.local or shell env; if none, route to credential setup before any process / revalidate / triage call.
5. Confirm agent choice with the user before the first paid call. If agent_choice is not already in the prompt and deepsec.config.ts does not pin a defaultAgent, ask whether to run codex (gpt-5.5, the upstream default; runs in a strict sandbox, cheaper, grep-heavy) or claude (claude-opus-4-8; strongest reasoning, most expensive). The two backends can be mixed via --reinvestigate and findings dedupe across agents. Skip the question if the user has already named an agent or has explicitly delegated the decision ("just pick reasonable defaults").

Scenes

1. PREPARE: Resolve intent, repo root, credential, budget cap, severity floor, agent choice. Refuse to run blind on a repo of unknown scale.
2. ACQUIRE: Read .deepsec/deepsec.config.ts, data/<id>/project.json, INFO.md, last runs/ entries, and target-repo signals (README, AGENTS.md/CLAUDE.md, framework configs, route directories) needed to author or verify INFO.md.
3. REASON: Pick the smallest pass that answers the user's question. Options include scan only, a --limit 50 calibration, a full process, process --diff, a matcher-authoring loop, or troubleshoot-only. Always state cost forecast and stopping condition before AI passes.
4. ACT: Run the planned commands from inside .deepsec/. For matchers, write per-slug files and wire the inline plugin. For PR mode, scaffold the two-job CI workflow.
5. VERIFY: Use deepsec status, the run's RunMeta, exit code (0 clean, 1 findings produced, other = error), candidate counts, and (when present) the --comment-out markdown to confirm output.
6. FINALIZE: Summarize findings by severity and verdict, list dollar cost and wall time, name files written, and call out follow-ups (revalidate HIGH+, write matchers for missed entry points, persist data/ between CI runs).

Transitions

• If .deepsec/ is missing and intent involves scanning → run bunx deepsec init (or npx deepsec init) and follow the printed prompt to populate INFO.md before any AI pass.
• If INFO.md is empty or template-shaped → write it (50-100 lines, project-specific, 3-5 examples per section, no line numbers, no generic CWE enumeration).
• If repo is > 500 files and no calibration has run → run a calibration pass first (deepsec docs recommend --limit 50 --concurrency 5) and report cost extrapolation before the full pass.
• If a process / revalidate run halts on quota → leave file locks intact, surface the exact remediation URL, re-run the same command after top-up.
• If the agent reports a refusal (refused: true) → never silently drop; document the affected files and either retry with the other backend or add the path to config.json:ignorePaths only if reproducible.
• If the user wants a CI gate → emit the two-job pattern (PR-code job has no pull-requests: write, comment job has no PR code).
• If the user wants more matcher coverage → run the matcher-authoring workflow against data/<id>/files/ and the parent repo's entry points.

Failure and recovery

Failure	Recovery
Missing AI credentials for --agent claude / codex	Pick a credential mode (gateway key / OIDC / direct / subscription) per resources/config.md and write .env.local.
401 Unauthorized from gateway	OIDC: re-run vercel env pull (12 h expiry). API key: regenerate. Confirm .env.local is in the cwd deepsec runs from.
Stopped: AI Gateway credits exhausted	Top up via the printed URL; re-run the same command, files already done are skipped.
Stopped: Claude Pro/Max subscription exhausted	Switch to AI Gateway; subscriptions don't carry full scans.
Persistent refusal on a single file (>5% of batches)	Add the path to data/<id>/config.json:ignorePaths, or run that file alone with --batch-size 1.
FP rate too high on HIGH+	Run revalidate --min-severity HIGH; tighten INFO.md's threat model and FP notes; bias matchers to precise.
noisy matcher wedges scanner on a 100k-file repo	Tighten filePatterns to language- or directory-anchored globs.
Sandbox auth fails	OIDC: re-run vercel env pull. Access-token mode: verify VERCEL_TOKEN + VERCEL_TEAM_ID + VERCEL_PROJECT_ID.
User asks for full scan with no budget context	Halt; report file count and forecast cost band; require explicit go-ahead before the full pass.

Exit

• Success: planned passes ran, findings exist with verdicts (or no findings produced), files written are listed, residual cost / followups are explicit.
• Partial success: some passes blocked on credentials/quota/refusal; the blocker, the safe-resume command, and the recommended next step are reported.
• Failure: nothing destructive happened, the user has the exact next command to unblock the work.

Logical Operations

Actions

Action	SSL primitive	Evidence
Detect existing workspace and credentials	READ	.deepsec/, .env.local, env vars
Estimate repo scale	INFER	`rg --files
Choose pass plan (calibrate vs full vs diff)	SELECT	File count, intent, budget cap
Init workspace	CALL_TOOL	bunx deepsec init
Write INFO.md	WRITE	data/<id>/INFO.md
Run scan	CALL_TOOL	bunx deepsec scan
Run AI investigation	CALL_TOOL	bunx deepsec process (--limit, --concurrency)
Triage / revalidate	CALL_TOOL	bunx deepsec triage / revalidate --min-severity HIGH
Export findings	CALL_TOOL	`bunx deepsec export --format md-dir
PR-mode review	CALL_TOOL	bunx deepsec process --diff <base> --comment-out comment.md
Author custom matcher	WRITE	.deepsec/matchers/<slug>.ts + inline plugin in deepsec.config.ts
Validate matcher hit rate	VALIDATE	bunx deepsec scan --matchers <slug> candidate count
Verify and report	NOTIFY	RunMeta, severity counts, dollar cost, FP rate
Stop on budget breach	TERMINATE	Refuse unbounded process without calibration

Tools and instruments

• Package manager: bun / bunx (preferred), pnpm, npm, yarn are interchangeable.
• CLI commands: deepsec init, init-project, scan, process, process --diff, triage, revalidate, enrich, report, export, metrics, status, sandbox <cmd>.
• Diff sources for PR mode: --diff <ref|range>, --diff-staged, --diff-working, --files <csv>, --files-from <path> (or - for stdin).
• Inspection: jq over data/<id>/files/**/*.json for ad-hoc severity / TP queries.
• Credentials: AI_GATEWAY_API_KEY, VERCEL_OIDC_TOKEN, ANTHROPIC_AUTH_TOKEN / ANTHROPIC_BASE_URL, OPENAI_API_KEY / OPENAI_BASE_URL, claude login, codex login.
• Resource files under resources/ for setup, scanning, PR review, matchers, triage, config, load on demand.

Canonical workflow path

1. Bootstrap (one time per repo):

   cd <target-repo>
   bunx deepsec init
   cd .deepsec
   bun install
   # Edit .env.local: set AI_GATEWAY_API_KEY=vck_… (or VERCEL_OIDC_TOKEN via `vercel env pull`)
   

   Then prompt the coding agent (this skill) to read .deepsec/node_modules/deepsec/SKILL.md and .deepsec/data/<id>/SETUP.md, skim README / AGENTS.md / CLAUDE.md and a handful of representative files, and replace each section of data/<id>/INFO.md (50-100 lines, 3-5 examples per section, no line numbers, no generic CWE rehash).
2. Calibrate before any full pass. The deepsec docs (getting-started.md, vercel-setup.md, faq.md) recommend --limit 50 --concurrency 5 as the calibration starting point.

   bunx deepsec scan
   bunx deepsec status
   bunx deepsec process --limit 50 --concurrency 5
   

   Read the per-batch cost. Extrapolate to full repo. Get the user's explicit go-ahead before the full process. If the user names different --limit / --concurrency values, use theirs.
3. Full investigation, triage, revalidate, export:

   bunx deepsec process --concurrency 5
   bunx deepsec triage --severity HIGH
   bunx deepsec revalidate --min-severity HIGH
   bunx deepsec export --format md-dir --out ./findings
   bunx deepsec metrics
   

4. PR mode (CI gate, scoped to changed files, exit code = 0/1):

   bunx deepsec process \
     --diff origin/${BASE_REF} \
     --comment-out comment.md
   

   Wire the two-job CI pattern from resources/pr-review.md. Never grant pull-requests: write to the job that runs PR-controlled code.
5. Custom matchers (close entry-point gaps surfaced in step 3):
   • Read the contract in .deepsec/node_modules/deepsec/dist/config.d.ts and the samples/webapp/matchers/* examples.
   • Write .deepsec/matchers/<slug>.ts, wire it through the inline plugin in .deepsec/deepsec.config.ts.

Resource scope

Scope	Resource target
CODEBASE	Target repo source files, framework configs, route directories, README / AGENTS.md / CLAUDE.md.
LOCAL_FS	.deepsec/deepsec.config.ts, .deepsec/.env.local, .deepsec/matchers/, .deepsec/data/<id>/{project.json,INFO.md,config.json,files/,runs/,reports/}, generated findings/, comment.md, CI workflow files.
PROCESS	`bunx deepsec scan
NETWORK	Anthropic / OpenAI via Vercel AI Gateway (default) or direct provider endpoints; optional Vercel Sandbox microVM control plane.
CREDENTIALS	AI_GATEWAY_API_KEY, VERCEL_OIDC_TOKEN, ANTHROPIC_AUTH_TOKEN, OPENAI_API_KEY, VERCEL_TOKEN / VERCEL_TEAM_ID / VERCEL_PROJECT_ID, claude / codex subscription tokens. Consume read-only; never echo secrets back to the user or commit them.
MEMORY	User-stated budget cap, severity floor, and stop conditions for the current session.

Preconditions

• Node.js 22+ is available.
• Repo is a git checkout (deepsec uses git history for revalidate and --diff).
• For any AI command: at least one credential mode is configured before the call, or the call is held until one is.
• For sandbox mode: Vercel auth is wired; otherwise stay local.
• For unbounded process runs on > 500-file repos: a --limit calibration pass has produced a cost number the user has acknowledged.

Effects and side effects

• Creates .deepsec/ (config, lockfile, scaffolding) and .deepsec/data/<id>/ (gitignored) inside the target repo.

• Writes .env.local (never commit) and may run vercel link / vercel env pull (writes .vercel/project.json + token).

• Spawns long-running AI processes that cost real money. Single full scans range from $25 to over $1,200 per the official cost guide and can climb to tens of thousands on very large repos.
• Reads source code; sends snippets to the configured LLM (gateway = zero retention; direct provider = subject to that provider's policy). Never exfiltrates secrets; the gateway key stays outside the worker sandbox in sandbox mode.

• May write .github/workflows/deepsec.yml (or analogue) when the user asks for a CI gate.

• Edits deepsec.config.ts and adds .deepsec/matchers/*.ts when authoring matchers.
• Does not commit, push, or open PRs unless the user explicitly authorizes a separate commit step (route via oma-scm).

Guardrails

1. Never launch an unbounded process on a repo whose size you have not measured. Always run a calibration pass first when file count is unknown or > 500 (deepsec docs recommend --limit 50 --concurrency 5; defer to a user-named value if given).
2. State cost and stopping condition before any AI pass. Use the published bands (100 files ≈ $25-60, 500 ≈ $130-300, 2,000 ≈ $500-1,200; ×2-3 swing).
3. Resume, do not reset. After any network / quota / Ctrl-C interruption, re-run the same command. Never delete data/<id>/ to "start clean" without explicit user instruction.
4. INFO.md stays short and project-specific. 50-100 lines, 3-5 examples per section. Name primitives but no line numbers. Skip generic CWE categories; built-in matchers cover those.
5. For PR/CI gates, keep PR-controlled code in a no-write job. Never grant pull-requests: write to a job that executes PR-controlled pnpm install / config-loading. Use the two-job pattern in resources/pr-review.md.
6. Pin actions to full SHAs in production CI; major-version tags are for examples only.
7. Never silently drop refusals. If the agent reports refused: true, log it, retry with the other backend, or add the file to ignorePaths only when reproducible.
8. Bias matchers toward precise when the bug shape is exact. Reserve noisy for entry-point coverage and tight globs.
9. Never echo or commit credentials (vck_…, sk-ant-…, sk-…, OIDC tokens). Treat .env.local as secret. Treat data/ as gitignored by default.
10. Treat deepsec like an agent with shell access. Recommend sandbox for prompt-injection-prone repos (vendored code, untrusted deps).
11. Findings need verdicts. For any HIGH+ surfaced to the user, prefer revalidate-tagged verdicts (true-positive / false-positive / fixed / uncertain) over raw process output.
12. Do not invent CLI flags, and trust the CLI over these notes. Anything beyond 's flag list must be checked against first. Likewise, when the CLI's printed model names, defaults, or per-batch costs disagree with the values written in this skill, the CLI is right — upstream moves faster than these resources.

References

• Workspace install + INFO.md bootstrap: resources/setup.md
• Full scan/process/triage/revalidate/export workflow + cost guide: resources/scanning.md
• PR / CI gate via process --diff (two-job pattern, exit-code semantics): resources/pr-review.md
• Authoring custom matchers (slugs, noise tiers, file globs, plugin wiring): resources/matchers.md
• Reading findings, severities, triage / revalidation verdicts, FP cuts: resources/triage.md
• deepsec.config.ts reference, env vars, plugin order, AI Gateway / Vercel Sandbox auth: resources/config.md
• Upstream docs (load only when a resource file points at one):
  • Repo + README: https://github.com/vercel-labs/deepsec
  • Per-topic docs at https://github.com/vercel-labs/deepsec/tree/main/docs (getting-started, reviewing-changes, writing-matchers, configuration, models, plugins, architecture, data-layout, vercel-setup, supported-tech, faq)
• Shared context loading: ../_shared/core/context-loading.md
• Shared quality principles: ../_shared/core/quality-principles.md