Orchestrates an end-to-end immune-repertoire pipeline from FASTQ to clonotypes, diversity, overlap, somatic hypermutation and lineages, routing on two forks. Use when deciding bulk vs single-cell (bulk amplicon/RNA-seq -> MiXCR analyze preset -> VDJtools/immunarch depth-normalized diversity and overlap -> figures; 10x paired VDJ -> MiXCR 10x preset or Cell Ranger -> scirpy gene-expression integration, chain QC, clonotype clusters); and TCR vs BCR (TCR -> exact CDR3-nt+V/J clonotypes, VDJtools diversity is fine; BCR -> somatic hypermutation makes exact clonotypes wrong -> Immcantation distToNearest/findThreshold clonal clustering, germline reconstruction, SHM, Dowser lineages); selecting the MiXCR 4.x preset by chemistry and activating its license; downsampling to equal depth before comparing diversity or overlap; and optionally annotating antigen specificity.
Standardmäßig ist der Prompt ausgewählt, der zuerst die Quelle prüft. Sie können zu einem direkten Befehl wechseln oder eine lokale Kopie herunterladen.
Quelldateien prüfen
Lesen Sie SKILL.md und alle von SkillsMP angezeigten Begleitdateien, bevor Sie sich für eine Installation entscheiden.
Mit Codex oder Claude installieren Kopieren Sie diesen Prompt, fügen Sie ihn in Codex, Claude oder einen anderen Assistant ein und lassen Sie die Skill-Seite prüfen und installieren.
Ein direkter Befehl überspringt den Prüf-Prompt. Prüfen Sie die Quelle, bevor Sie ihn ausführen.
Orchestrates an end-to-end immune-repertoire pipeline from FASTQ to clonotypes, diversity, overlap, somatic hypermutation and lineages, routing on two forks. Use when deciding bulk vs single-cell (bulk amplicon/RNA-seq -> MiXCR analyze preset -> VDJtools/immunarch depth-normalized diversity and overlap -> figures; 10x paired VDJ -> MiXCR 10x preset or Cell Ranger -> scirpy gene-expression integration, chain QC, clonotype clusters); and TCR vs BCR (TCR -> exact CDR3-nt+V/J clonotypes, VDJtools diversity is fine; BCR -> somatic hypermutation makes exact clonotypes wrong -> Immcantation distToNearest/findThreshold clonal clustering, germline reconstruction, SHM, Dowser lineages); selecting the MiXCR 4.x preset by chemistry and activating its license; downsampling to equal depth before comparing diversity or overlap; and optionally annotating antigen specificity.
[{"after_align":"Amplicon alignment >80-90%; RNA-seq legitimately low, judge by clonotype yield; chain usage on-target"},{"after_assemble":"Clonotype count plausible; report UMI/molecule counts, not reads, on UMI libraries"},{"before_diversity":"All samples downsampled to a common depth, else diversity/overlap are confounded by library size"}]
Before using code patterns, verify installed versions match. If versions differ:
CLI: <tool> --version then <tool> --help to confirm flags
If code throws ImportError, AttributeError, or TypeError, introspect the installed
package and adapt the example to match the actual API rather than retrying.
Note: MiXCR 4.x replaced the 3.x hand-built mixcr align -s hsa -p rna-seq chain with the preset-driven mixcr analyze <preset> system, and 4.x refuses to run any command without an activated license (mixcr activate-license, or MI_LICENSE_FILE on HPC/Docker). A copied 3.x recipe fails on both counts.
TCR/BCR Repertoire Pipeline
"Analyze my immune-repertoire sequencing data end-to-end" -> Route the data by chemistry and receptor, assemble clonotypes with MiXCR, then hand off to depth-normalized diversity (bulk TCR), clonal clustering plus somatic-hypermutation and lineages (BCR), or single-cell gene-expression integration (10x), and finally figures.
This workflow is a router, not a fixed line. Two forks decide everything downstream; pick both before running anything.
The governing principle: the pipeline forks on two axes
A repertoire measurement is a depth- and chemistry-confounded sample of an unevenly-expanded clonal population, so the correct pipeline depends on how the library was made and which receptor was sequenced. Choosing the wrong branch silently produces plausible-but-wrong numbers.
The most common pipeline mistake is running BCR through exact-CDR3 VDJtools diversity. SHM shatters one clone into hundreds of near-identical variants, so exact clonotypes over-count diversity and destroy lineage structure. BCR must route to Immcantation clonal clustering (distToNearest -> findThreshold) before any diversity, SHM, or lineage step. TCR has no SHM, so exact CDR3-nt+V/J is the correct, defensible clonotype and VDJtools diversity is appropriate.
MiXCR 4.x will not run unlicensed. Activate once (academic license is free), then choose the preset by the exact kit -- the preset encodes species, RNA vs DNA, 5' boundary model (floating for multiplex primers, rigid for 5'-RACE), tag pattern, and assembling feature. The wrong preset does not error; it silently mis-calls V and truncates CDR3.
mixcr activate-license # or: export MI_LICENSE_FILE=/path/mi.license
mixcr exportPreset --preset-name generic-amplicon # audit what a preset actually does
Preset by chemistry (verify against mixcr analyze --help and the built-in preset list; MiLaboratories renames occasionally):
# One command runs align -> refineTagsAndSort -> (assemblePartial) -> assemble -> export.# From MiXCR 4.7, presets without an intrinsic assembling feature require --assemble-clonotypes-by.# generic-amplicon REQUIRES material type + both alignment-boundary mixins (it errors without them).# Multiplex primers on both ends -> floating boundaries; 5'RACE -> --rigid-left-alignment-boundary.
mixcr analyze generic-amplicon \
--species hsa \
--rna \
--floating-left-alignment-boundary \
--floating-right-alignment-boundary C \
sample_R1.fastq.gz sample_R2.fastq.gz \
results/sample
# QC every sample -- low alignment or off-target chains means wrong preset/species/contamination
mixcr qc results/sample.clns
mixcr exportQc align results/*.clns results/qc_align.pdf
mixcr exportQc chainUsage results/*.clns results/qc_chains.pdf
QC checkpoint 1 (after align): amplicon libraries should align at high rate (often >80-90%); a low rate signals wrong species, wrong boundary model, or untrimmed primers. RNA-seq mining legitimately aligns a tiny fraction -- judge it by absolute clonotype yield. chainUsage catches cross-contamination and index hopping (a TRB library showing appreciable IGH).
Detailed alignment, UMI/cell-barcode handling, and export flags: tcr-bcr-analysis/mixcr-analysis.
QC checkpoint 2 (after assemble): a large reads-to-clonotypes drop-off is normal (millions of reads -> thousands of clones), especially after UMI collapse. Report the right denominator: uniqueMoleculeCount on UMI libraries (reporting reads re-introduces the PCR bias the UMIs removed), cells on single-cell, reads only on non-UMI bulk.
Stage 3t: Bulk TCR diversity and overlap -- downsample FIRST
Diversity (richness, Shannon, clonality) and set-based overlap (Jaccard, shared-clonotype counts) are strictly increasing functions of sequencing depth. Comparing raw values across samples of unequal depth measures depth, not biology -- the single most common error in the field. DownSample every sample to a common depth (or read rarefaction curves at a common x) before comparing.
# 1. Equalize depth: set the target near the cohort lower quartile, and EXCLUDE (do not drag# everyone down to) any sample far below it -- an under-sampled library cannot support a claim.
vdjtools DownSample -x 50000 -m metadata.txt ds/
# 2. Diversity on depth-normalized samples; report the resampled table for cross-sample claims
vdjtools CalcDiversityStats -m ds/metadata.txt diversity/
# 3. Overlap with a depth-robust, abundance-weighted metric (F2 / Morisita-Horn), not Jaccard
vdjtools CalcPairwiseDistances -m ds/metadata.txt overlap/
Version caveat (MiXCR 4.x -> VDJtools): VDJtools is unmaintained for MiXCR 4.x and its parser breaks on raw exportClones output (Unable to parse clonotype string; 4.x injects commas and renames/moves columns). For a MiXCR 4.7+ cohort, prefer MiXCR's own mixcr postanalysis individual / mixcr postanalysis overlap (its native 4.x replacement for VDJtools diversity/overlap, with the same downsample-first semantics) over the vdjtools Convert -S mixcr route; if VDJtools is required, strip the added contig/target-sequence columns before Convert. immunarch (R) is the other modern alternative.
QC checkpoint 3 (before diversity): confirm all samples share one depth, and drop any sample whose rarefaction curve is still climbing steeply below that depth (under-sampled -- exclude rather than normalize the cohort down to it). Hold the clonotype match key (nt vs aa, +/-V, +/-J) constant study-wide; aa-level matching inflates apparent sharing via convergent recombination. Report clonality alongside a q=2 Hill number (inverse Simpson) and a rarefaction curve, not alone. immunarch is the modern R alternative with the same normalization semantics: tcr-bcr-analysis/vdjtools-analysis.
Stage 3b: BCR clonal clustering, SHM and lineages (Immcantation)
BCR cannot use exact clonotypes. Feed the AIRR TSV to Immcantation and follow the mandatory order: annotate -> (TIGGER genotype) -> per-sequence germline -> data-derived clonal threshold -> cluster -> per-clone germline -> SHM/selection -> lineage trees. The threshold from the bimodal distance-to-nearest distribution drives every downstream number; a wrong threshold merges or splits clones.
library(shazam); library(scoper); library(dowser)
db <- airr::read_rearrangement('results/sample.airr.tsv')# 1. Clonal threshold: valley between the intra-clone and inter-clone modes (per dataset, never reused)
dtn <- distToNearest(db, model ='ham', normalize ='len')
thr <- findThreshold(dtn$dist_nearest, method ='density')@threshold
# 2. Cluster within same-V/J/junction-length partitions at that threshold
cl <- hierarchicalClones(dtn, threshold = thr)# 3. Reconstruct per-clone germline (CreateGermlines.py --cloned), then observedMutations, then Dowser getTrees
Cluster clones within an individual only (genotypes and thresholds are private). Diversity for BCR runs on clone_id, not exact CDR3. Full germline reconstruction, SHM quantification, BASELINe selection, and IgPhyML/Dowser trees: tcr-bcr-analysis/immcantation-analysis.
Stage 3s: Single-cell integration (scirpy)
10x paired VDJ carries native chain pairing and links receptor to cell state. The clonotype definition is a choice, not a default, and multichain cells are likely doublets.
import scirpy as ir
import mudata as mu
airr = ir.io.read_airr('results/sample.airr.tsv') # or read_10x_vdj on Cell Ranger output
mdata = mu.MuData({'gex': gex_adata, 'airr': airr}) # scirpy 0.13+ stores AIRR as an awkward array
ir.pp.index_chains(mdata) # REQUIRED before chain_qc / clonotyping
ir.tl.chain_qc(mdata) # flag multichain (doublet) / orphan cells# TCR path: exact-identity clonotypes on CDR3-nt + V/J
ir.pp.ir_dist(mdata) # default metric='identity'
ir.tl.define_clonotypes(mdata)
# BCR path: SHM breaks exact identity, so cluster. ir_dist MUST be recomputed with the SAME# metric+sequence the clustering call uses (scirpy keys the matrix as ir_dist_{sequence}_{metric};# the identity matrix above will not satisfy a normalized_hamming call).# ir.pp.ir_dist(mdata, metric='normalized_hamming', sequence='nt')# ir.tl.define_clonotype_clusters(mdata, sequence='nt', metric='normalized_hamming', same_v_gene=True)# integrate with the scanpy GEX modality; measure expansion vs cell state
Filtering multichain/orphan cells before expansion analysis preferentially deletes small clones and inflates apparent expansion -- state the trade-off, do not blindly drop them. CellRanger BCR contigs are not IMGT-numbered and include partial/nonproductive contigs; reannotate with IgBLAST (dandelion/airrflow) before rigorous BCR clustering. GEX side (clustering, annotation): single-cell/preprocessing and single-cell/clustering. Full clonotype-definition decisions: tcr-bcr-analysis/scirpy-analysis.
Stage 4: Visualization
Spectratype (CDR3-length), V-J usage circos, clonal-space bars, rarefaction curves, and clonal tracking across timepoints. Every figure inherits the depth caveat -- plot rarefaction at a common x, and track clones only after downsampling timepoints to equal depth. Recipes: tcr-bcr-analysis/repertoire-visualization.
Stage 5 (optional): Specificity annotation
Annotate or cluster clonotypes by likely antigen (VDJdb/McPAS lookup, or GLIPH2/TCRdist clustering). A database hit is a sequence match to a published antigen-specific receptor, not proof the clone binds that antigen. "Public" clonotypes are enriched for high generation-probability (Pgen), short, low-insertion CDR3s produced independently in many donors by convergent recombination (Venturi 2006 PNAS 103:18691-18696) -- publicity is not antigen selection. Treat every specificity call as a hypothesis, condition on Pgen, and validate. Handoff: tcr-bcr-analysis/specificity-annotation.
Common Errors
Symptom
Cause
Fix
MiXCR exits immediately, "no license"
4.x needs an activated license
mixcr activate-license, or set MI_LICENSE_FILE on HPC/Docker; whitelist the phone-home IPs on firewalled clusters
mixcr align -s hsa -p rna-seq unrecognized
3.x syntax removed in 4.x
Use mixcr analyze <preset> R1 R2 out_prefix
Analysis runs but clonotypes look wrong (truncated CDR3, inflated diversity)
Wrong preset -- RNA/DNA, boundary model, or missing tag pattern
Match preset to the exact kit; mixcr exportPreset to audit; set --species on generic presets
MiXCR 4.7 errors on analyze needing an assembling feature
Preset lacks an intrinsic assembling feature
Add --assemble-clonotypes-by CDR3
Diversity/clonality differ across samples but tracks read count
Comparing raw diversity at unequal depth
DownSample to a common depth first; report the resampled table / rarefaction at common x
BCR clones fragmented, diversity absurdly high, no lineages
Exact-CDR3 clonotypes applied to a hypermutating receptor
Route BCR to Immcantation distToNearest -> findThreshold clustering before any diversity/SHM
SHM counts inflated, spurious mutations in junction
No germline reconstruction, or junction not masked
CreateGermlines.py -g dmask then --cloned; restrict observedMutations to IMGT_V
scirpy expansion inflated by doublets
multichain cells not filtered
Run chain_qc and drop multichain cells before clonotype/expansion analysis
Overlap dominated by the shallower sample
Jaccard / shared-count on unequal depth
Downsample, then use abundance-weighted F2 or Morisita-Horn
Related Skills
tcr-bcr-analysis/mixcr-analysis - V(D)J alignment and clonotype assembly
tcr-bcr-analysis/vdjtools-analysis - Depth-normalized diversity and overlap
tcr-bcr-analysis/immcantation-analysis - BCR clonal clustering, SHM and lineages
Bolotin DA, et al. MiXCR: software for comprehensive adaptive immunity profiling. Nat Methods 2015; 12:380-381.
Shugay M, et al. VDJtools: unifying post-analysis of T cell receptor repertoires. PLoS Comput Biol 2015; 11:e1004503.
Gupta NT, et al. Change-O: a toolkit for analyzing large-scale B cell immunoglobulin repertoire sequencing data. Bioinformatics 2015; 31:3356-3358.
Sturm G, et al. Scirpy: a Scanpy extension for analyzing single-cell T-cell receptor-sequencing data. Bioinformatics 2020; 36:4817-4818.
Chao A, et al. Rarefaction and extrapolation with Hill numbers: a framework for sampling and estimation in species diversity studies. Ecol Monogr 2014; 84:45-67.
Venturi V, et al. Sharing of T cell receptors in antigen-specific responses is driven by convergent recombination. PNAS 2006; 103:18691-18696.
