pagekit-first-page-draft

name	pagekit-first-page-draft
description	Draft the first page from the full PageKit chain. Step 06 of the PageKit method. Use when steps 01-05 are done and you are ready to write the page itself. The draft must respect the anti-slop drafting constraints.

PageKit step 06 — First Page Draft

You are running step 06 of the PageKit method. This is where slop prevention bites. The drafting constraints in ../pagekit/references/anti-slop.md are not optional.

Read first

• ./references/prompt.md
• ../pagekit-page-argument-shape/references/framework.md (drafting constraints live here)
• ../pagekit/references/anti-slop.md (the patterns to avoid)

Inputs

All five upstream artifacts:

• runs/<run-name>/signal-doc.md
• runs/<run-name>/message-spine.md
• runs/<run-name>/first-page-decision.md
• runs/<run-name>/page-argument-shape.md
• runs/<run-name>/proof-map.md

Procedure

1. Load ./references/prompt.md. Note the embedded anti-slop constraints; do not strip them when substituting inputs.
2. Substitute the five artifacts above.
3. Save the substituted prompt to runs/<run-name>/prompts/06-first-page-draft.md.
4. Prompt the model.
5. Save the raw response to runs/<run-name>/outputs/06-first-page-draft-output.md.
6. Distill into runs/<run-name>/first-page-draft.md.
7. Run scripts/slop-check.sh runs/<run-name>/first-page-draft.md immediately. Resolve every flagged pattern by rewriting the line. Re-run until clean.
8. Update working-log.md.

Hard rules

• Stay inside the proof map. If the draft wants to say something the proof map cannot defend, mark the line with *[verification flag: ...]*.
• Stay inside the argument shape. Do not add sections that were not approved at step 04.
• Stay outside the anti-slop pattern list. The script will catch the obvious cases; the claim-check step (07) will catch the rest.

Quality gate

A strong draft:

• inherits structure from the argument shape
• stays inside the proof map
• reads as written by a person with a voice, not by a machine
• uses *[verification flag: ...]* for any product-specific claim not verified against briefs
• passes scripts/slop-check.sh clean before being handed to step 07

If the draft is weak: stop, ask what upstream artifact is too thin. Rarely fix at the draft level, fix at the source.

Next

The draft is not the deliverable. The logged run is. After the draft is clean, do not stop. Continue the chain:

1. Invoke pagekit-slop-check on the draft. Resolve any flags.
2. Invoke pagekit-claim-check (step 07) at a severity you choose and log. This produces claim-check.md and, if any line was rewritten, first-page-draft-corrected.md.
3. Write evaluation.md — the run's own honest read of what worked and what stayed thin.
4. Invoke pagekit-evaluator-pass to produce evaluator-pass.md — the adversarial second read.
5. Fill in working-log.md across every step (replace all scaffold *[Fill in]* placeholders).
6. Invoke pagekit-run-check — it must return tier: FULLY LOGGED or tier: PUBLISHABLE.

Only once run-check reports FULLY LOGGED (or PUBLISHABLE) is the run done. Stopping at this step leaves the run at ARTIFACT-ONLY, which does not count.