Jeden Skill in Manus ausführen
mit einem Klick

Jeden Skill in Manus mit einem Klick ausführen

ops-deploy-base-node

Sterne1

Forks0

Aktualisiert20. Juni 2026 um 23:00

Use when: updating base node deployment, meshsa-base systemd service, Raspberry Pi 5 setup, mesh-up.sh, FreeTAKServer bridge install, env files, field runbooks, or ops scripts.

Installation

Mit Codex oder Claude installieren Kopieren Sie diesen Prompt, fügen Sie ihn in Codex, Claude oder einen anderen Assistant ein und lassen Sie die Skill-Seite prüfen und installieren.

In Manus ausführen

Quelle

ianshank

ianshank/GCP-Drone-Comms-Unit

GitHub-Repository öffnen Creator-Repositorys ansehen

Download

In Manus ausführen

Verwandte BerufeSOC

Basierend auf der SOC-Berufsklassifikation

Netzwerk- und ComputersystemadministratorenInformatik- und Mathematikberufe·SOC 15-1244

SKILL.md

readonly

Mehr aus diesem Repository

gleiches Repository

jetson-perception

ianshank/GCP-Drone-Comms-Unit

Use when: working in packages/jetson_yolo_gcs — adding a detector backend (YOLO/Hailo/ONNX/TensorRT), a tracker backend (Norfair/SORT), GStreamer camera/egress pipeline, the MAVLink LANDING_TARGET bridge, precision-landing safety, or the perception pipeline failure policy.

2026-07-161

pre-pr-validator

ianshank/GCP-Drone-Comms-Unit

Use when: running pre-PR checks, performing regression testing, validating ruff linting/formatting, verifying mypy type safety, and checking test coverage before pushing.

2026-07-161

meshsa-inference

ianshank/GCP-Drone-Comms-Unit

Use when: working on the optional NVIDIA Nemotron inference bridge — meshsa.inference, NemotronClient/InferenceService/NemotronConfig, MESHSA_INFERENCE_* env vars, aiohttp session reuse, [AI Insight] feedback-loop filter, or the aioresponses test mocks.

2026-07-081

meshsa-observability

ianshank/GCP-Drone-Comms-Unit

Use when: adding or changing metrics/health export — RouterMetrics, render_prometheus, per-transport counters, the /metrics or /healthz route, HealthConfig fields, or a Grafana golden-signal dashboard.

2026-07-081

meshsa-commanding-safety

ianshank/GCP-Drone-Comms-Unit

Use when: touching the supervised two-way command path (Initiative C) — meshsa.command.*, flightctl/run_commander.py, arm/disarm/RTL/set_mode, COMMAND_INT/ACK, force-disarm, operator confirmation, command audit log, or arm preconditions.

2026-06-301

spec-driven-change

ianshank/GCP-Drone-Comms-Unit

Use when: starting a roadmap/initiative feature, new milestone work, a transport/codec/backend that adds behavior, or any change big enough to need a design. Author or update a spec under docs/specs first; code cites the spec by section.

2026-06-301

name	ops-deploy-base-node
description	Use when: updating base node deployment, meshsa-base systemd service, Raspberry Pi 5 setup, mesh-up.sh, FreeTAKServer bridge install, env files, field runbooks, or ops scripts.
argument-hint	Target node type, deployment path, service change, and validation available

Deploy or Update a Base Node

When to Use

Change ops/base-service install docs, env examples, or systemd unit.
Change ops/pi5-node provisioning scripts or mesh setup.
Document field deployment of the Meshtastic to FreeTAKServer bridge.

Procedure

Read ../../../ops/AGENTS.md.
Keep service, install guide, and env example in sync.
Use meshsa-base as the installed entry point; do not reference deleted root scripts or old meshsa_framework paths.
Keep credentials, PSKs, host-specific callsigns, and tokens out of tracked files. Use placeholders in .env.example files.
Preserve graceful shutdown (KillSignal=SIGINT) for the asyncio bridge.
For Pi scripts, prefer idempotent setup steps and explicit package names.
Update root README deployment links if paths change.
State whether validation was docs-only, syntax-only, or hardware-tested.

References

ops/base-service/INSTALL_base_node.md
ops/base-service/base.env.example
ops/base-service/meshsa-base.service
ops/pi5-node/README_pi5_node.md
ops/pi5-node/mesh-up.sh
ops/pi5-node/setup_pi5_node.sh