Use when implementing a custom extractor in Axum: a type that builds itself from the request by implementing FromRequestParts or FromRequest, a wrapper that runs an inner extractor and remaps its rejection, or a struct derived with axum-macros #[derive(FromRequest)]. Prevents the stale 0.7 habit of keeping #[async_trait] on a 0.8 extractor impl, prevents the ambiguous-extractor bug from implementing both FromRequest and FromRequestParts for one concrete type, and prevents the "Handler is not satisfied" error from a body extractor that is not last. Covers the two extractor traits and the Rejection associated type, the FromRequestParts vs FromRequest choice, native async fn in trait versus #[async_trait], wrapping and remapping an inner extractor, FromRef substate access, and the axum-macros derive attributes. Keywords: axum custom extractor, FromRequestParts, FromRequest, impl FromRequestParts, type Rejection, IntoResponse, async_trait removal, RPITIT, derive FromRequest, from_request via, from_request rejecti
Standardmäßig ist der Prompt ausgewählt, der zuerst die Quelle prüft. Sie können zu einem direkten Befehl wechseln oder eine lokale Kopie herunterladen.
Quelldateien prüfen
Lesen Sie SKILL.md und alle von SkillsMP angezeigten Begleitdateien, bevor Sie sich für eine Installation entscheiden.
Mit Codex oder Claude installieren Kopieren Sie diesen Prompt, fügen Sie ihn in Codex, Claude oder einen anderen Assistant ein und lassen Sie die Skill-Seite prüfen und installieren.
Ein direkter Befehl überspringt den Prüf-Prompt. Prüfen Sie die Quelle, bevor Sie ihn ausführen.
Use when implementing a custom extractor in Axum: a type that builds itself from the request by implementing FromRequestParts or FromRequest, a wrapper that runs an inner extractor and remaps its rejection, or a struct derived with axum-macros #[derive(FromRequest)]. Prevents the stale 0.7 habit of keeping #[async_trait] on a 0.8 extractor impl, prevents the ambiguous-extractor bug from implementing both FromRequest and FromRequestParts for one concrete type, and prevents the "Handler is not satisfied" error from a body extractor that is not last. Covers the two extractor traits and the Rejection associated type, the FromRequestParts vs FromRequest choice, native async fn in trait versus #[async_trait], wrapping and remapping an inner extractor, FromRef substate access, and the axum-macros derive attributes. Keywords: axum custom extractor, FromRequestParts, FromRequest, impl FromRequestParts, type Rejection, IntoResponse, async_trait removal, RPITIT, derive FromRequest, from_request via, from_request rejection, ViaRequest, ViaParts blanket impl, wrap Json extractor, ValidatedJson, Handler is not satisfied, conflicting trait implementation, extractor is ambiguous, how do I write my own extractor, build a type from the request, protect a handler with an extractor.
license
MIT
compatibility
Designed for Claude Code. Requires Axum 0.7,0.8.
metadata
{"author":"OpenAEC-Foundation","version":"1.0"}
axum-syntax-custom-extractors
Overview
A custom extractor is a type you define that builds itself from an incoming
request. You turn a type into an extractor by implementing one of two traits.
Which trait is decided by exactly one question: does the extractor read the
request body?
FromRequestParts<S>: builds the value from request parts only (method,
URI, headers, extensions, captured path params). It NEVER touches the body
and may appear in any handler argument position.
FromRequest<S>: builds the value by consuming the request body. A handler
may have at most one FromRequest extractor and it MUST be the last
argument.
Both traits carry a Rejection associated type: the error returned when
extraction fails. Rejection MUST implement IntoResponse so Axum converts a
failed extraction directly into an HTTP response.
The single version-divergent detail is the async mechanism. Axum 0.8 uses
native async fn in traits (return-position impl Trait, RPITIT, Rust 1.75).
Axum 0.7 requires the #[async_trait] attribute macro on the impl block.
Everything else in this skill is identical across 0.7 and 0.8.
Quick Reference
Trait
Reads body
Method
Handler position
FromRequestParts<S>
NO
from_request_parts(&mut Parts, &S)
any
FromRequest<S>
YES
from_request(Request, &S)
LAST only
Trait definitions, Axum 0.8 native-async form (verified verbatim from
docs.rs):
ALWAYS implement FromRequestParts when the extractor does not read the
body. It composes more freely: it runs in any handler argument position.
ALWAYS implement FromRequest when the extractor consumes the body. It must
be the last handler argument.
NEVER implement BOTH FromRequest and FromRequestParts for the same
concrete type. A blanket impl already bridges them; a hand-written second
impl makes the extractor ambiguous and unusable as a handler argument.
ALWAYS make the Rejection associated type a value that implements
IntoResponse. (StatusCode, &'static str) and (StatusCode, Json<T>)
both qualify.
NEVER write #[async_trait] on an extractor impl for Axum 0.8. It is
required on Axum 0.7 and forbidden on 0.8.
ALWAYS delegate body parsing to an existing extractor (Json, Form,
Bytes) inside a FromRequest impl instead of reading bytes by hand.
Decision Trees
Which trait to implement
Does the extractor need to read the request BODY?
NO (reads method, URI, headers, extensions, path params, state)
-> impl FromRequestParts<S>
YES (parses JSON, form, bytes, or the raw body stream)
-> impl FromRequest<S> (must be last arg)
The blanket impl impl<S, T> FromRequest<S, ViaParts> for T where T: FromRequestParts<S> means every FromRequestParts type is automatically a
FromRequest type. So a FromRequestParts extractor still works as the last
handler argument. The "must be last" constraint only bites a genuine body
extractor.
Hand-written impl vs derive macro
What shape is the extractor?
ONE value pulled from the request (a header, a token, a tenant)
-> hand-write impl FromRequestParts / FromRequest
a STRUCT bundling several existing extractors into one argument
-> #[derive(FromRequestParts)] or #[derive(FromRequest)]
wrap ONE existing extractor and remap only its rejection
-> hand-write a newtype impl, or derive with
#[from_request(via(...), rejection(...))]
Reading application state inside an extractor
Does the extractor need application state?
NO -> impl<S: Send + Sync> FromRequestParts<S> for MyType (ignore state)
YES, the WHOLE state value
-> bound the impl to a concrete state: impl FromRequestParts<AppState>
YES, ONE field of a composite state
-> bound with FromRef: where SomeResource: FromRef<S>, S: Send + Sync
then SomeResource::from_ref(state)
Patterns
Pattern: a FromRequestParts extractor
The most common custom extractor reads a request part and builds a typed
value, rejecting the request when the data is missing or malformed. The
0.7-to-0.8 difference is exactly one line: the #[async_trait] attribute.
// axum 0.8 - SAME extractor, NO #[async_trait], native async fn in traituse axum::extract::FromRequestParts;
use axum::http::{header::USER_AGENT, request::Parts, HeaderValue, StatusCode};
structExtractUserAgent(HeaderValue);
impl<S: Send + Sync> FromRequestParts<S> forExtractUserAgent {
typeRejection = (StatusCode, &'staticstr);
asyncfnfrom_request_parts(parts: &mut Parts, _state: &S)
->Result<Self, Self::Rejection>
{
parts
.headers
.get(USER_AGENT)
.map(|v| ExtractUserAgent(v.clone()))
.ok_or((StatusCode::BAD_REQUEST, "missing user-agent header"))
}
}
Facts that hold for both versions:
parts: &mut Parts is http::request::Parts. It is &mut because some
built-in extractors take their data out of parts.extensions. Reading
headers does not need the &mut, but the trait signature requires it.
state: &S is an immutable borrow. A parts extractor reads state, it never
owns it. The bound S: Send + Sync is required in both versions.
A handler that takes ExtractUserAgent as an argument is now protected: the
request is rejected before the handler body runs if the header is absent.
Pattern: a body extractor wrapping Json
A FromRequest extractor consumes the body, so it must be the last handler
argument. ALWAYS delegate the byte parsing to an existing extractor and remap
its rejection rather than reading the body stream by hand.
// axum 0.8 - ValidatedJson<T>: wraps Json<T>, runs validation, remaps rejection// axum 0.7: identical body, add #[async_trait] above the impl blockuse axum::extract::{FromRequest, Request};
use axum::extract::rejection::JsonRejection;
use axum::http::StatusCode;
use axum::Json;
use serde_json::json;
structValidatedJson<T>(T);
impl<S, T> FromRequest<S> forValidatedJson<T>
where
S: Send + Sync,
T: serde::de::DeserializeOwned + validator::Validate,
Json<T>: FromRequest<S, Rejection = JsonRejection>,
{
typeRejection = (StatusCode, Json<serde_json::Value>);
asyncfnfrom_request(req: Request, state: &S)
->Result<Self, Self::Rejection>
{
// delegate body consumption to Json, remap its JsonRejectionletJson(value) = Json::<T>::from_request(req, state)
.await
.map_err(|rej| {
(rej.status(), Json(json!({ "error": rej.body_text() })))
})?;
// run domain validation, remap ValidationErrors to a 422
value.validate().map_err(|e| {
(
StatusCode::UNPROCESSABLE_ENTITY,
Json(json!({ "error": e.to_string() })),
)
})?;
Ok(ValidatedJson(value))
}
}
Facts behind this pattern:
Request is axum::extract::Request, an alias for
http::Request<axum::body::Body>. It is consumed by value because reading
the body takes ownership of the single-use stream.
JsonRejection exposes .status() and .body_text(). Calling these and
rebuilding a new tuple is how an inner rejection becomes the outer
Rejection.
(StatusCode, Json<serde_json::Value>) implements IntoResponse, so it
satisfies the Rejection: IntoResponse bound.
Pattern: reading a substate via FromRef
When the extractor needs one resource out of a composite application state,
bound the impl with FromRef instead of pinning the whole state type.
// axum 0.8 - extractor that pulls one resource out of a composite AppStateuse axum::extract::{FromRef, FromRequestParts};
use axum::http::{header::HOST, request::Parts, StatusCode};
structCurrentTenant(Tenant);
impl<S> FromRequestParts<S> forCurrentTenantwhere
TenantRegistry: FromRef<S>,
S: Send + Sync,
{
typeRejection = (StatusCode, &'staticstr);
asyncfnfrom_request_parts(parts: &mut Parts, state: &S)
->Result<Self, Self::Rejection>
{
letregistry = TenantRegistry::from_ref(state);
lethost = parts
.headers
.get(HOST)
.and_then(|v| v.to_str().ok())
.ok_or((StatusCode::BAD_REQUEST, "missing host header"))?;
registry
.lookup(host)
.map(CurrentTenant)
.ok_or((StatusCode::NOT_FOUND, "unknown tenant"))
}
}
This keeps the extractor reusable with any state type that can produce a
TenantRegistry through FromRef. See axum-core-state for the FromRef
substate model.
Pattern: deriving an extractor with axum-macros
axum-macros provides #[derive(FromRequest)] and
#[derive(FromRequestParts)] so a struct that bundles several extractors
needs no hand-written impl. The derive macro syntax is identical on Axum 0.7
and 0.8.
// axum 0.7 / 0.8 - derive FromRequestParts, per-field extractionuse axum::extract::{FromRequestParts, Query};
use axum_extra::TypedHeader;
use axum_extra::headers::ContentType;
use std::collections::HashMap;
#[derive(FromRequestParts)]structMyExtractor {
#[from_request(via(Query))]
query_params: HashMap<String, String>,
content_type: TypedHeader<ContentType>,
}
By default the derive calls from_request (or from_request_parts) on each
field. #[from_request(via(Query))] runs Query to populate that field; a
field with no attribute must already be an extractor type.
// axum 0.7 / 0.8 - derive FromRequest with a unified custom rejectionuse axum::extract::{rejection::JsonRejection, FromRequest};
use axum::http::StatusCode;
use axum::response::{IntoResponse, Response};
use axum::Json;
#[derive(FromRequest)]#[from_request(rejection(ApiError))]structCreateUser {
#[from_request(via(Json))]
payload: NewUserPayload,
}
// ApiError MUST implement IntoResponse AND From<JsonRejection>// (one From impl per via-field rejection type).structApiError(StatusCode, String);
implIntoResponseforApiError {
fninto_response(self) -> Response {
(self.0, self.1).into_response()
}
}
implFrom<JsonRejection> forApiError {
fnfrom(rej: JsonRejection) ->Self {
ApiError(rej.status(), rej.body_text())
}
}
Derive rules (verified on docs.rs):
#[from_request(via(...))] extracts a field (or the whole type) through
another extractor. The via extractor must be a generic newtype struct (a
tuple struct with exactly one public field) that implements the trait.
#[from_request(rejection(MyRejection))] sets one unified rejection type.
MyRejection MUST implement IntoResponse and From<R> for every field
rejection R.
#[from_request(state(MyState))] pins a concrete state type instead of a
generic S.
With FromRequest, only the last field may consume the body.
Pattern: porting a 0.7 extractor to 0.8
1. Delete the #[async_trait] attribute above every FromRequest /
FromRequestParts impl block.
2. Remove the async-trait dependency from Cargo.toml.
3. Leave the async fn body unchanged. The signature stays the same.
4. Verify Rust toolchain >= 1.75 (Axum 0.8 MSRV: native RPITIT needs it).
The plain async fn from_request_parts / async fn from_request body is
byte-for-byte identical between versions. Only the attribute and the
dependency are removed.
The Both-Traits Rule
NEVER implement both FromRequest and FromRequestParts for the same
concrete type. The blanket impl
impl<S, T> FromRequest<S, ViaParts> for T where T: FromRequestParts<S>
already makes every FromRequestParts type usable as a FromRequest through
the ViaParts marker. A hand-written FromRequest<S> impl resolves through
the default M = ViaRequest marker, so the type now has two FromRequest
impls reachable through two different markers. The compiler can no longer
infer which marker a handler argument needs, the extractor becomes ambiguous,
and the Handler trait bound fails.
The single legitimate exception is a generic wrapper extractor (for example
axum-extra's WithRejection<E, R>). A generic wrapper implements the two
traits over different inner extractors E, so the impls never collide for one
concrete type. For a concrete (non-generic) extractor, pick exactly one trait.
Reference Links
references/methods.md: verbatim FromRequestParts and FromRequest trait
definitions, the ViaParts blanket impl, the Rejection bound, the
axum-macros derive attribute table, and JsonRejection accessors.
references/examples.md: complete version-annotated working extractors,
including the parts extractor, the ValidatedJson body extractor, the
FromRef substate extractor, and the two derive forms.
references/anti-patterns.md: real mistakes with root-cause analysis,
including #[async_trait] left on a 0.8 impl, the both-traits ambiguity, a
body extractor not placed last, and a Rejection type that is not
IntoResponse.
Related skills: axum-syntax-extractors (the built-in extractor set and the
two traits), axum-errors-extractor-rejections (the rejection module and
WithRejection), axum-core-version-migration (the full 0.7 to 0.8 matrix),
axum-impl-validation (the validator crate and ValidatedJson in context),
axum-core-state (the FromRef substate model).
