claude-stwinbox-diagnostics

WHAT: Connects to the STEVAL-STWINBX1 sensor board to acquire vibration data, configure MEMS sensors, and establish baseline vibration profiles for rotating machinery. WHEN: Use when the user wants to start monitoring a machine, acquire vibration data from the STWIN.box, configure sensor parameters, set up data logging, or compare current vibration levels against a stored baseline. Also use for "connect to sensor", "acquire vibration", "set up monitoring", or "configure STWIN".

WHAT: Generates structured diagnostic reports for machine operators and maintenance technicians, summarizing vibration analysis results with severity levels, fault findings, and actionable maintenance recommendations in clear, non-technical language. WHEN: Use when the user asks to create a report, generate a maintenance summary, produce documentation of a vibration measurement, or communicate findings to plant personnel. Also use for "write report", "summarize results", "generate PDF", or "create maintenance document".

WHAT: Performs multi-step vibration analysis to diagnose rotating machinery faults including unbalance, misalignment, bearing defects, and mechanical looseness using FFT, envelope analysis, and bearing fault-frequency calculations. WHEN: Use when the user has vibration data (live from STWIN.box or from a file) and wants to identify the root cause of abnormal vibration, interpret a spectrum, or detect bearing degradation. Also use when asked to "diagnose vibration", "find fault", "analyze spectrum", or "check bearing health".