spec-driven-task-implementer

name	spec-driven-task-implementer
description	Use this skill when an approved Spec-Driven change has reached Phase 4 and the user wants a task, phase, or full feature implemented from .specs/changes/<slug>. It executes tasks in order, updates task status immediately, verifies each task before completion, and should not be used before implementation approval.

Spec-Driven Task Implementer Skill

Implement approved spec-driven work by executing tasks from tasks.md in a disciplined, traceable loop.

Your job is to:

• implement only what the spec and task plan require
• keep changes small, scoped, and consistent with the repository
• update task status in tasks.md as work progresses
• verify each task before marking it complete
• preserve the traceability chain from implementation back to DES-* and REQ-*

Default path: validate the complete spec, pick the next eligible task, mark it in progress, implement only that scoped change, verify it, mark it complete, and stop. Continue to the next task only when the user explicitly asks for a phase or full-feature implementation.

Read references/task-execution-patterns.md when you need examples for resuming interrupted work, choosing the smallest meaningful verification, or handling failed verification loops.

Read references/parallel-execution-patterns.md when executing a phase or full feature on a platform that supports sub-agent parallelism (e.g., OpenCode).

Shared Protocol

Follow the Context Preflight and Phase Gate protocols in the spec-driven-shared-protocol skill's references/shared-protocol.md.

Per-Phase Todo List

When this skill begins execution, create a todo list derived from the pending tasks in the approved tasks.md for the target slug. Each pending task becomes a todo item. This list is scoped to this phase only — do not carry over items from any previous phase.

Item Derivation

• Read the approved tasks.md for the target slug.
• For each task that is - [ ] (pending), create a corresponding todo item.
• Skip tasks that are already - [x] (completed) or - [~] (in progress).

Progress Rules

• Mark an item in_progress when starting that task.
• Mark an item completed only after the task has been verified and marked - [x] in tasks.md.
• Do not mark an item completed until verification passes.
• Create a fresh list when this phase begins; do not append to a prior phase's list.

Source Of Truth

Use these files in this order:

1. requirements.md for the intended behavior
2. design.md for architectural boundaries and file placement
3. tasks.md for execution order and task scope
4. project guideline files for local conventions
5. contextual-stewardship rules for active project decisions

If these inputs conflict, stop and resolve the conflict before continuing.

Code Anatomy is not a closed completion checklist unless design.md says Coverage: Exhaustive. For Coverage: Representative or Coverage: Initial Discovery Only, complete the discovery/inventory task before treating the task plan as stable.

Task Status Rules

tasks.md is the progress ledger and must stay accurate. Use checkbox states:

• - [ ] pending
• - [~] in progress
• - [x] completed

Hard Rule

Update tasks.md immediately when a task changes state. Mark - [~] before implementation, - [x] only after verification succeeds. Do not batch status updates.

Execution Loop

For each task:

1. Find the target task in tasks.md
2. Confirm it is pending and all _Depends: tasks are complete
3. Change the task to - [~] and save tasks.md
4. Implement only the scoped behavior required by the task
5. If the task discovers additional in-scope work, follow the Task Amendment Protocol before marking the task complete
6. Run the smallest meaningful verification
7. If verification passes, change the task to - [x] and save tasks.md
8. If verification fails, keep the task in progress until the issue is fixed or escalated

Task Selection Rules

Implementing a Specific Task

• Implement only that task unless a required dependency must be finished first
• Do not opportunistically work ahead on unrelated tasks

Implementing a Phase

• Execute pending tasks in that phase in dependency order
• Complete one task fully before starting the next

Implementing a Full Feature

• Execute all pending tasks across all phases in dependency order

Default Scope

• Implement one task by default
• Do not continue to the next task unless the user explicitly requested a phase or full feature

Parallel Execution Protocol

When the user requests a phase or full feature implementation and the platform exposes a Task tool for spawning sub-agents, you MAY execute independent tasks in parallel.

Platform Detection

Check whether your tool set includes a Task tool. If it does, you are on a platform that supports parallel sub-agent execution. If not, fall back to sequential execution.

Dependency Analysis

Before spawning sub-agents, analyze the dependency graph:

1. Read all pending tasks in the requested scope from tasks.md.
2. Build a dependency graph from _Depends: tags.
3. Identify independent batches: groups of pending tasks whose _Depends: are all satisfied and that do not depend on each other.
4. Tasks within the same batch can execute in parallel. Tasks across batches must execute sequentially.

Example: If task 2.1 depends on 1.3, and task 2.2 also depends on 1.3, and 1.3 is already [x], then 2.1 and 2.2 form an independent batch and can spawn in parallel.

Parallel Spawn Protocol

For each task in an independent batch, launch a sub-agent via the Task tool:

• subagent_type: general
• description: Implement task <task-id>: <task title>
• Prompt: provide a standalone brief containing:
  • The spec artifact paths: .specs/changes/<slug>/requirements.md, .specs/changes/<slug>/design.md, .specs/changes/<slug>/tasks.md.
  • The specific task ID and description to implement.
  • Full spec-driven-task-implementer rules (this skill).
  • Instruction to read tasks.md, mark the task - [~], implement, verify, and mark - [x].
  • Instruction to return: changed files list, verification outcome, and the updated task status.

Launch all tasks in the same batch simultaneously (multiple Task tool calls in one response).

Result Collection

When all sub-agents in a batch complete:

1. Read tasks.md to confirm each task was marked - [x].
2. If any task remains - [~] or verification failed, fix or re-spawn that task before proceeding.
3. If all tasks in the batch succeeded, advance to the next independent batch.
4. Repeat until all tasks in the requested scope are complete.

Conflict Prevention

• Do NOT spawn tasks in parallel if their _Implements: file sets overlap with each other.
• Do NOT spawn tasks in parallel with the same _Depends: chain (they are sequentially dependent by definition).
• If unsure about file overlap, default to sequential execution.

Inline Fallback

If the Task tool is not available, execute all tasks sequentially as described in the standard Task Selection Rules.

Parallel Execution Quality Bar

Before spawning a parallel batch, verify:

• all _Depends: for each task in the batch are satisfied
• no task in the batch depends on another task in the same batch
• _Implements: file sets are non-overlapping across tasks in the batch
• platform Task tool is available

Implementation Rules

• Follow design.md for architecture and file placement
• Follow STYLEGUIDE.md and surrounding code for naming, structure, and patterns
• Keep changes minimal and scoped to the active task
• Do not add features that are not required by the spec
• Do not refactor unrelated code while implementing the task
• Respect package and module boundaries
• Do not treat files outside Required Touchpoints as scope creep when Known Impact Surface or Discovery Targets identify them as possible in-scope work

Task Amendment Protocol

If implementation discovers files, entrypoints, exports, tests, integrations, or verification work not listed in tasks.md:

1. Determine whether the discovered work maps to existing REQ-* and DES-* scope.
2. If it is in scope and does not change product behavior, public contracts, architecture, or risk materially, add an amendment task to tasks.md before doing the newly discovered work.
3. The amendment task must include _Discovered from: <task-id or discovery target>_ and _Implements: DES-X, REQ-Y.Z_.
4. If the discovered work changes requirements, architecture, public contracts, migration scope, security posture, or operational risk, keep the current task - [~] and request a mini-review before proceeding.
5. Do not mark the discovery task complete until amendments are added or an explicit no-amendment rationale is recorded in that task.

Amendments are not scope creep when they preserve the approved requirements and design intent. They are scope corrections caused by non-exhaustive discovery.

Test Task Rules

Tasks in Acceptance Criteria Testing phase or prefixed with Test: should create or update tests rather than production behavior.

Test Naming

• Remove the Test: prefix when writing actual test names
• Use pure behavior descriptions in test titles
• Do not include REQ-* or DES-* IDs in test names or code comments

Good: it('rejects invalid email addresses', async () => { ... })

Bad: it('Test: rejects invalid email addresses // REQ-2.1', async () => { ... })

Verification Rules

Before marking any task - [x], verify:

• the implementation matches the task description
• the implementation still matches the linked requirements and design intent
• relevant tests pass
• no new failures were introduced in the touched scope

Use the smallest meaningful verification first.

Conflict Policy

Stop and surface the issue if:

• requirements.md, design.md, and tasks.md disagree materially
• the design does not fit the codebase reality in a safe way
• a task requires a breaking change not described in the spec

When a conflict appears:

1. Do not mark the task complete
2. Summarize the conflict clearly
3. Propose the smallest reasonable resolution
4. Ask for clarification only if you cannot safely proceed

Recovery Rules

Interrupted Sessions

If work resumes after interruption:

1. Read tasks.md first
2. Locate any - [~] task
3. Verify the code and file state for that task
4. Resume that task before starting new work

Test Failures During Implementation

If verification fails:

1. Keep the current task at - [~]
2. Fix the implementation or test as appropriate
3. Re-run the relevant verification

Quality Bar (Self-Check)

Before marking a task complete, verify:

• active task status in tasks.md is accurate
• task dependencies were satisfied before starting
• changes are scoped to the active task
• implementation matches requirements and design intent
• relevant verification was run and passed

Response Behavior

If the requested task or phase is implementable, execute it directly.

If material ambiguity or a blocking spec conflict prevents safe implementation, ask a short clarification instead.

Things To Avoid

• adding HTML comments such as <!-- TBD -->, <!-- KNOWN ISSUE -->
• adding scope that is not requested
• silently diverging from the design
• marking tasks complete without verification
• batching multiple task status updates after the fact
• treating non-exhaustive Code Anatomy as a closed file list
• creating additional files in .specs/changes/<slug>/. Only write to tasks.md for status updates and task amendments allowed by the Task Amendment Protocol