zellij

name	zellij
description	Session, layout, and pane management for Zellij terminal multiplexer. Use when managing Zellij sessions, layouts, or automating terminal workflows.

Zellij — Session, Layout, and Pane Management

Core rule: never hardcode the session name

Zellij injects $ZELLIJ_SESSION_NAME into every process inside a session. Always read it — never write "pmr", "bop", or any literal name.

# Nushell — canonical zellij_session function used in all dispatch.nu files
def zellij_session [] {
  if "ZELLIJ_SESSION_NAME" in $env {
    $env.ZELLIJ_SESSION_NAME
  } else {
    # Running outside Zellij — auto-detect
    let sessions = (^zellij list-sessions --no-formatting 2>/dev/null
      | lines | where { |l| ($l | str trim) != "" })
    if ($sessions | length) == 1 {
      $sessions | first | str trim
    } else if ($sessions | length) > 1 {
      error make { msg: $"Multiple sessions active: ($sessions | str join ', '). Set ZELLIJ_SESSION_NAME." }
    } else {
      error make { msg: "No Zellij session found. Start one with: zellij --session <name>" }
    }
  }
}

# Bash equivalent
SESSION=${ZELLIJ_SESSION_NAME:-$(zellij list-sessions --no-formatting | head -1 | awk '{print $1}')}

Sessions

# Start or resume (canonical pattern — no hardcoded name)
zellij attach --create bop        # bop project
zellij attach --create efi        # efi/dub project
zellij attach --create zam        # zam project

# List active sessions
zellij list-sessions
zellij list-sessions --no-formatting   # machine-readable, no ANSI

# Detach without killing
Ctrl+p d

# Kill a session
zellij kill-session <name>

Layouts

Each project has a .kdl layout file:

Project	Layout	Launch
bop	layouts/bop.kdl	zellij --session bop --layout layouts/bop.kdl
efi	layouts/efi.kdl	zellij --session efi --layout layouts/efi.kdl
zam	layouts/zam.kdl	zellij --session zam --layout layouts/zam.kdl

bop.kdl structure

Two tabs: bop (primary) and dispatch (engine runners).

bop tab (7-pane card lifecycle layout):

┌──────────┬──────────────────┬──────────────────┐
│  BOARD   │  SPEC            │  QA              │
│  watch   │  what to build   │  did it work?    │
│  status  ├──────────────────┼──────────────────┤
│          │  STDOUT          │  STDERR          │
│          │  agent output    │  agent errors    │
├──────────┴──────────────────┴──────────────────┤
│  INSPECTOR — bop inspect <id>                  │
├─────────────────────────────────────────────────┤
│  SHELL — bop commands (focus/retry/approve)    │
└─────────────────────────────────────────────────┘

dispatch tab: dispatcher (75%) | merge-gate (75%) | dispatch-shell (25%)

KDL quick reference

layout {
    default_tab_template {
        children
        pane size=2 borderless=true {
            plugin location="zellij:status-bar"
        }
    }

    tab name="main" focus=true {
        pane split_direction="horizontal" {
            pane name="top" size="70%" { command "nu" }
            pane name="bottom" size="30%" { command "nu" }
        }
    }

    tab name="logs" {
        pane name="log-tail" {
            command "nu"
            args "-c" "tail -f /tmp/bop.log"
        }
    }
}

split_direction="horizontal" = children stacked top/bottom. split_direction="vertical" = children side by side.

Spawning panes from scripts

# Fire-and-forget — pane closes when command exits
zellij --session $ZELLIJ_SESSION_NAME run \
  --name my-card \
  --close-on-exit \
  -- sh -c "nu /path/to/adapter.nu ..."

# Inspectable — pane stays open after command exits (for debugging)
zellij --session $ZELLIJ_SESSION_NAME run \
  --name my-card \
  -- sh -c "nu /path/to/adapter.nu ..."

# Open a new tab
zellij --session $ZELLIJ_SESSION_NAME action new-tab --name "logs"

# Navigate to an existing tab by name
zellij --session $ZELLIJ_SESSION_NAME action go-to-tab-name "bop"

Use --close-on-exit for: dispatch worker panes (adapter runs). Omit --close-on-exit for: interactive panes, debugging, long-lived agents.

PATH gotcha — critical for dispatch workers

nu (Nushell) is not in PATH inside Zellij panes spawned via zellij run. Always use the full path:

# WRONG — fails silently in detached pane context
nu dispatch.nu mark-done 022

# CORRECT
/opt/homebrew/bin/nu dispatch.nu mark-done 022

Same applies to bop binary: use $ROOT/target/debug/bop or add to PATH explicitly:

export PATH=$HOME/bop/target/debug:$PATH

Suspending TUI to drop to shell (! key in bop ui)

Do NOT use Ctrl+O — that is Zellij's built-in Session mode key and will be intercepted before reaching any app running inside a pane.

bop ui uses ! (normal mode, no modifier) for the subshell drop, inspired by vim's :! convention. Zellij does not intercept bare printable keys in normal mode.

// Triggered by KeyCode::Char('!') in the AppEvent::Key handler
// Suspend TUI
crossterm::terminal::disable_raw_mode()?;
crossterm::execute!(stdout(), crossterm::terminal::LeaveAlternateScreen)?;

// Run shell in card's worktree
std::process::Command::new(std::env::var("SHELL").unwrap_or("sh".into()))
    .current_dir(&card_worktree)
    .status()?;

// Restore TUI
crossterm::execute!(stdout(), crossterm::terminal::EnterAlternateScreen)?;
crossterm::terminal::enable_raw_mode()?;
// trigger full redraw

This does NOT open a new Zellij pane — it suspends and restores within the existing pane. Works correctly inside Zellij because alternate screen is stacked (Zellij has its own alternate screen above it).

Zellij keys already taken — do NOT use in TUI apps

These are intercepted by Zellij before reaching pane content:

Key	Zellij action
Ctrl+O	Session mode (session manager)
Ctrl+P	Pane mode
Ctrl+T	Tab mode
Ctrl+N	New pane
Ctrl+H	Move pane focus left
Ctrl+B	Scroll up
Ctrl+F	Scroll down
Ctrl+G	Unlock (in locked mode)

Safe to use in TUI apps: bare printable keys (!, e, n, r, etc.), Alt+<key> (Zellij uses Alt+arrow but not most Alt+letter combos), function keys F1–F12.

Key bindings (Zellij default — navigation)

Key	Action
Alt + arrow	Move focus between panes
Alt + n	New pane
Alt + [ / ]	Previous / next tab
Ctrl+p d	Detach from session (session stays alive)
Ctrl+p z	Toggle pane fullscreen
Ctrl+p x	Close focused pane
Ctrl+p r	Rename focused pane

Integration with dispatch.nu (all three projects)

All three projects (bop, efi, zam) use the same zellij_session pattern:

dispatch.nu run --wave N --yes
  → zellij_session []          # reads $ZELLIJ_SESSION_NAME
  → zellij --session <name> run --name <spec-id> --close-on-exit -- sh -c <AC cmd>
  → pane runs Auto-Claude agent
  → on exit: mark-done / mark-failed called via /opt/homebrew/bin/nu

Lock file (dispatch-lock.json) records session: (zellij_session) so rescue operations can target the correct session.

Nested panes — bop ui card tabs (spec 029 future)

Each running card will optionally get a tab with nested panes:

• Top pane: adapter stdout (live)
• Bottom pane: log tail (logs/stderr)

Tab naming convention: card-<id> (e.g. card-feat-auth). Created via zellij action new-tab --name card-<id>, then pane splits via zellij action new-pane --direction down.

Projects and session names

Project	Canonical session	Layout
bop	bop	layouts/bop.kdl
efi (dub)	efi	layouts/efi.kdl
zam	zam	layouts/zam.kdl

These are current names — they WILL change. Always use $ZELLIJ_SESSION_NAME.

Quick reference

# Get current session name (canonical method)
SESSION=${ZELLIJ_SESSION_NAME:-$(zellij list-sessions --no-formatting | head -1 | awk '{print $1}')}

# Start/attach to session
zellij attach --create <session-name>

# List sessions
zellij list-sessions --no-formatting

# Run command in new pane
zellij --session $SESSION run --name pane-name --close-on-exit -- command

# Detach without killing
Ctrl+p d

# Navigate between panes
Alt + arrow keys

Common mistakes

• Hardcoding session names: Never write literal names like "bop" or "efi" — always read $ZELLIJ_SESSION_NAME
• Using Ctrl+O in TUI apps: Zellij intercepts this key for Session mode — use bare printable keys like ! instead
• Not using full paths to binaries: nu and other tools are not in PATH inside spawned panes — use full paths like /opt/homebrew/bin/nu
• Forgetting --close-on-exit: Worker panes should close when done to avoid resource leaks
• Using Ctrl+O for subshell drop: Use bare ! key instead, as Ctrl+O is intercepted by Zellij