sglang-diffusion-performance

name	sglang-diffusion-performance
description	Use when choosing the fastest SGLang Diffusion flags for a model, GPU, and VRAM budget.

SGLang Diffusion Performance Tuning

Use this skill when the user wants the fastest command line, lower VRAM, or the right performance flags for a specific model and GPU setup.

Before running any sglang generate command below inside the diffusion container:

• use python/sglang/multimodal_gen/.claude/skills/sglang-diffusion-benchmark-profile/scripts/diffusion_skill_env.py to derive the repo root, verify write access, and choose idle GPU(s)
• export HF_TOKEN first when the selected model lives in a gated Hugging Face repo such as black-forest-labs/FLUX.*
• export FLASHINFER_DISABLE_VERSION_CHECK=1
• cd to the repo root resolved from sglang.__file__

Native Backend Gate

Performance numbers are useful only when the intended backend actually ran.

• Treat any log containing Falling back to diffusers backend, Using diffusers backend, or Loaded diffusers pipeline as invalid for native SGLang performance tuning.
• Use --backend diffusers only for an explicit diffusers baseline. For native recipes, leave the default backend or pin --backend sglang.
• If a fallback happened, fix pipeline registration/model-path/config issues first, then rerun. Do not compare perf dumps collected from a fallback run.
• When the runtime auto-selects parallel settings because the user omitted them, keep the result as an auto-tuned baseline. For reproducible tuning, pin --num-gpus, --ulysses-degree, --ring-degree, and --enable-cfg-parallel explicitly.

Reference: SGLang-Diffusion Advanced Optimizations Blog

---

Section 1: Lossless Optimizations

These options are intended to preserve output quality. In practice, some paths (most notably torch.compile) can still introduce small floating-point drift, so validate on your target model when numerical parity matters.

Option	CLI Flag / Env Var	What It Does	Speedup	Limitations / Notes
torch.compile	--enable-torch-compile	Applies torch.compile to the DiT forward pass, fusing ops and reducing kernel launch overhead.	~1.2–1.5x on denoising	First request is slow (compilation). May cause minor precision drifts due to PyTorch issue #145213. Pair with --warmup for best results.
Warmup	--warmup	Runs dummy forward passes to warm up CUDA caches, JIT, and torch.compile. Eliminates cold-start penalty.	Removes first-request latency spike	Adds startup time. Without --warmup-resolutions, warmup happens on first request.
Warmup Resolutions	--warmup-resolutions 256x256 720x720	Pre-compiles and warms up specific resolutions at server startup (instead of lazily on first request).	Faster first request per resolution	Each resolution adds to startup time. Serving mode only; useful when you know your target resolutions in advance.
Multi-GPU (SP)	--num-gpus N --ulysses-degree N	Sequence parallelism across GPUs. Shards sequence tokens (not frames) to minimize padding.	Near-linear scaling with N GPUs	Requires NCCL; inter-GPU bandwidth matters. ulysses_degree * ring_degree = sp_degree. For Wan2.2 video, start by benchmarking pure Ulysses before assuming a mixed Ulysses/Ring layout is fastest.
CFG Parallel	--enable-cfg-parallel	Runs conditional and unconditional CFG branches in parallel across GPUs. For CFG models on multi-GPU, benchmark this against pure Ulysses on your topology instead of assuming one always wins.	Often faster than pure SP for CFG models	Requires num_gpus >= 2. Halves the Ulysses group size (e.g. 8 GPU → two 4-GPU groups). Only for models that use CFG. Nightly coverage configs may intentionally use smaller Ulysses groups to keep ring behavior exercised; that does not automatically make them the lowest-latency choice.
Layerwise Offload	--dit-layerwise-offload	Async layer-by-layer H2D prefetch with compute overlap. Only ~2 DiT layers reside on GPU at a time, dramatically reducing VRAM. For some video models the copy stream can be almost fully hidden behind compute.	Saves VRAM (40 GB → ~11 GB for Wan A14B); can be near-zero speed cost on the right workload	Enabled by default for Wan/MOVA video models. Incompatible with Cache-DiT. For image models or highly parallelized setups (many GPUs, small per-GPU compute), the copy stream may not be fully hidden and can cause slowdown.
Offload Prefetch Size	--dit-offload-prefetch-size F	Fine-grained control over layerwise offload: how many layers to prefetch ahead. 0.0 = 1 layer (min VRAM), 0.1 = 10% of layers, ≥1 = absolute layer count.	Tune for cases where default offload has copy stream interference (e.g. image models). 0.05–0.1 is a good starting point.	Values ≥ 0.5 approach no-offload VRAM with worse performance. Use lower values when copy overlap is weak; disable offload when memory allows and latency dominates.
FSDP Inference	--use-fsdp-inference	Uses PyTorch FSDP to shard model weights across GPUs with prefetch. Low latency, low VRAM.	Reduces per-GPU VRAM	Mutually exclusive with --dit-layerwise-offload. More overhead than SP on high-bandwidth interconnects.
CPU Offload (components)	--text-encoder-cpu-offload, --image-encoder-cpu-offload, --vae-cpu-offload, --dit-cpu-offload	Offloads specific pipeline components to CPU when not in use.	Reduces peak VRAM	Adds H2D transfer latency when the component is needed. Auto-enabled for low-VRAM GPUs (<30 GB). Tip: after the first request completes, the console prints a peak VRAM analysis with suggestions on which offload flags can be safely disabled — look for the "Components that could stay resident" log line.
Pin CPU Memory	--pin-cpu-memory	Uses pinned (page-locked) memory for CPU offload transfers.	Faster H2D transfers	Slightly higher host memory usage. Enabled by default; disable only as workaround for CUDA errors.
Attention Backend (lossless)	--attention-backend fa	Selects a lossless attention kernel for SGLang-native pipelines: fa (FlashAttention 2/3/4 alias) or torch_sdpa.	FA is usually faster than SDPA on long sequences	FA requires compatible GPU (Ampere+). For --backend diffusers, valid backend names differ; use the names documented in docs/diffusion/performance/attention_backends.md.
Parallel Folding	(automatic when SP > 1)	Reuses the SP process group as TP for the T5 text encoder, so text encoding is parallelized "for free".	Faster text encoding on multi-GPU	Automatic; no user action needed. Only applies to T5-based pipelines.

---

Section 2: Lossy Optimizations

These options trade output quality for speed or VRAM savings. Results will differ from the baseline.

Option	CLI Flag / Env Var	What It Does	Speedup	Quality Impact / Limitations
Approximate Attention	--attention-backend sage_attn / sage_attn_3 / sliding_tile_attn / video_sparse_attn / sparse_video_gen_2_attn / vmoba_attn / sla_attn / sage_sla_attn	Replaces exact attention with approximate or sparse variants. sage_attn: INT8/FP8 quantized Q·K; sliding_tile_attn: spatial-temporal tile skipping; others: model-specific sparse patterns.	~1.5–2x on attention (varies by backend)	Quality degradation varies by backend and model. sage_attn is the most general; sparse backends (sliding_tile_attn, video_sparse_attn, etc.) are video-model-specific and may require config files (e.g. --mask-strategy-file-path for STA). Requires corresponding packages installed.
Cache-DiT	Native: SGLANG_CACHE_DIT_ENABLED=true plus SGLANG_CACHE_DIT_* env vars. Diffusers backend: --backend diffusers --cache-dit-config <yaml-or-json>	Caches intermediate residuals across denoising steps and skips redundant computations via DBCache, TaylorSeer, and optional SCM.	~1.5-2x on supported models	Quality depends on cache policy. Incompatible with --dit-layerwise-offload. Do not pass --cache-dit-config for native SGLang tuning unless you are intentionally using the diffusers backend flow.
Quantized Models (Nunchaku / SVDQuant)	--enable-svdquant --transformer-weights-path <path> + optional --quantization-precision int4|nvfp4, --quantization-rank 32	W4A4-style quantization via Nunchaku. Reduces DiT weight memory by ~4x. Precision/rank can be auto-inferred from weight filename or set explicitly.	~1.5–2x compute speedup	Lossy quantization; quality depends on rank and precision. Requires pre-quantized weights. Ampere (SM8x) or SM12x only (no Hopper SM90). Higher rank = better quality but more memory.
Pre-quantized Transformer Override	--transformer-path <dir-or-repo> / --transformer-weights-path <path>	Load a quantized transformer component or raw transformer weights. For converted ModelOpt FP8/NVFP4 directories, prefer --transformer-path; use --transformer-weights-path for weight-only artifacts the model loader expects.	~1.3–1.5x compute (dtype dependent)	Requires a validated quantized transformer override, such as one produced by the ModelOpt helper tools. Quality is usually slightly worse than BF16 and depends on the format, fallback layers, and calibration scope.
Component Precision Override	--dit-precision fp16, --vae-precision fp16|bf16	On-the-fly dtype conversion for individual components. E.g. convert a BF16 model to FP16 at load time, or run VAE in BF16 instead of FP32.	Reduces memory; FP16 can be faster on some GPUs	May affect numerical stability. VAE is FP32 by default for accuracy; lowering it is lossy. DiT defaults to BF16.
Fewer Inference Steps	--num-inference-steps N (sampling param)	Reduces the number of denoising steps. Fewer steps = faster.	Linear speedup	Quality degrades with too few steps. Model-dependent optimal range.

---

Quick Recipes

Maximum speed, video model, multi-GPU, lossless (Wan A14B, 8 GPUs)

sglang generate --model-path Wan-AI/Wan2.2-T2V-A14B-Diffusers \
  --num-gpus 8 --enable-cfg-parallel --ulysses-degree 4 \
  --enable-torch-compile --warmup \
  --text-encoder-cpu-offload true \
  --prompt "..." --save-output

Note: --dit-layerwise-offload is enabled by default for Wan/MOVA video models and is often a good default, but still benchmark it on your exact workload if latency matters.

For Wan2.2 specifically:

• the nightly-aligned 4-GPU benchmark may use --enable-cfg-parallel --ulysses-degree=2 to keep CFG and ring behavior covered
• that is a coverage choice, not a guaranteed best-performance choice
• for pure latency tuning, benchmark pure Ulysses too, for example --ulysses-degree=4 --ring-degree=1 on 4 GPUs
• on 8 GPUs, compare pure --ulysses-degree=8 against --enable-cfg-parallel --ulysses-degree=4

Nightly-aligned model, 2 GPUs: LTX-2 two-stage

sglang generate --model-path Lightricks/LTX-2 \
  --pipeline-class-name LTX2TwoStagePipeline \
  --prompt "A cat and a dog baking a cake together in a kitchen." \
  --width 768 --height 512 \
  --num-frames 121 \
  --seed 42 --num-gpus 2 --enable-cfg-parallel \
  --enable-torch-compile --warmup --save-output

Note: this generate recipe is aligned with the nightly comparison case ltx2_twostage_t2v. The nightly config omits explicit steps and guidance, so this command omits them too and uses runtime defaults. LTX2TwoStagePipeline is a native path and auto-resolves the spatial upsampler plus distilled LoRA from the same model snapshot unless you override them.

Nightly-aligned model, 2 GPUs: LTX-2.3 TI2V two-stage

sglang generate --model-path Lightricks/LTX-2.3 \
  --pipeline-class-name LTX2TwoStagePipeline \
  --prompt "The cat starts walking slowly towards the camera." \
  --image-path "${ASSET_DIR}/cat.png" \
  --width 768 --height 512 \
  --num-frames 121 \
  --seed 42 --num-gpus 2 --cfg-parallel-size 2 \
  --enable-torch-compile --warmup --save-output

Note: this matches the nightly comparison case ltx2.3_twostage_ti2v_2gpus. The nightly config omits explicit steps and guidance, so this command omits them too and uses runtime defaults. Download ${ASSET_DIR}/cat.png with the benchmark/profile skill before running it.

Native baseline, 2 GPUs: LTX-2.3 one-stage

sglang generate --model-path Lightricks/LTX-2.3 \
  --prompt "A beautiful sunset over the ocean" \
  --negative-prompt "shaky, glitchy, low quality, worst quality, deformed, distorted, disfigured, motion smear, motion artifacts, fused fingers, bad anatomy, weird hand, ugly, transition, static." \
  --width 768 --height 512 \
  --num-frames 121 --fps 24 \
  --num-inference-steps 30 --guidance-scale 3.0 \
  --seed 1234 --num-gpus 2 \
  --enable-torch-compile --warmup --save-output

Note: use this as the native LTX2Pipeline baseline for LTX-2.3. It keeps the validated one-stage resolution and explicit LTX-2.3 sampling defaults, and matches the ltx23-one-stage benchmark preset in sglang-diffusion-benchmark-profile.

Skill-only stress target, 2 GPUs: LTX-2.3 two-stage high resolution

sglang generate --model-path Lightricks/LTX-2.3 \
  --pipeline-class-name LTX2TwoStagePipeline \
  --prompt "A beautiful sunset over the ocean" \
  --negative-prompt "shaky, glitchy, low quality, worst quality, deformed, distorted, disfigured, motion smear, motion artifacts, fused fingers, bad anatomy, weird hand, ugly, transition, static." \
  --width 1536 --height 1024 \
  --num-frames 121 --fps 24 \
  --num-inference-steps 30 --guidance-scale 3.0 \
  --seed 1234 --num-gpus 2 \
  --enable-torch-compile --warmup --save-output

Note: this is a high-resolution stress target for the native LTX-2.3 two-stage path. It matches the skill-only ltx23-two-stage benchmark preset, not a nightly comparison case.

Maximum speed, image model, single GPU, lossless

sglang generate --model-path <IMAGE_MODEL> \
  --enable-torch-compile --warmup \
  --dit-layerwise-offload false \
  --dit-cpu-offload false \
  --prompt "..." --save-output

Note: for image models, per-layer compute is smaller, so layerwise offload may not fully hide H2D transfer. Disable DiT layerwise and CPU offload if VRAM allows; otherwise a large image DiT can stay resident on CPU and make the denoise loop H2D-bound.

Image-edit baselines: JoyAI and FireRed

sglang generate --backend=sglang \
  --model-path jdopensource/JoyAI-Image-Edit-Diffusers \
  --prompt "Make the cat wear a red hat" \
  --image-path "${ASSET_DIR}/cat.png" \
  --width 1024 --height 1024 \
  --num-inference-steps 40 --guidance-scale 4.0 \
  --num-gpus 2 --enable-cfg-parallel --ulysses-degree 1 \
  --dit-layerwise-offload false --dit-cpu-offload false \
  --enable-torch-compile --warmup --save-output

sglang generate --backend=sglang \
  --model-path FireRedTeam/FireRed-Image-Edit-1.1 \
  --prompt "Make the cat wear a red hat" \
  --image-path "${ASSET_DIR}/cat.png" \
  --width 1024 --height 1024 \
  --num-inference-steps 40 --guidance-scale 4.0 \
  --num-gpus 2 --enable-cfg-parallel --ulysses-degree 1 \
  --dit-layerwise-offload false --dit-cpu-offload false \
  --enable-torch-compile --warmup --save-output

Use FireRedTeam/FireRed-Image-Edit-1.0 in the same command when comparing FireRed 1.0. These are native image-edit paths; keep the reference image, prompt, seed, and output size fixed when comparing denoise numbers. On H100, 2-GPU CFG parallel was faster than the otherwise matching 2-GPU Ulysses command: FireRed 1.0 improved from 13419.15 ms to 10955.90 ms, and FireRed 1.1 improved from 13414.72 ms to 10934.21 ms.

Hunyuan3D shape baseline

OUTPUT_DIR=$(python3 "$ENV_PY" print-output-dir --kind benchmarks --mkdir)
CONFIG_DIR="${OUTPUT_DIR}/generated_configs"
mkdir -p "${CONFIG_DIR}"
printf '{"paint_enable": false}\n' > "${CONFIG_DIR}/hunyuan3d-shape.json"

sglang generate --backend=sglang \
  --model-path tencent/Hunyuan3D-2 \
  --prompt "generate 3d mesh" \
  --image-path "${ASSET_DIR}/cat.png" \
  --config "${CONFIG_DIR}/hunyuan3d-shape.json" \
  --num-inference-steps 50 --guidance-scale 5.0 \
  --dit-layerwise-offload false --dit-cpu-offload false \
  --enable-torch-compile --warmup --save-output

For Hunyuan3D, treat Hunyuan3DShapeDenoisingStage as the primary latency metric. Mesh export and paint stages are useful end-to-end checks but should not drive DiT optimization decisions.

Low VRAM, decent speed (single GPU)

sglang generate --model-path <MODEL> \
  --enable-torch-compile --warmup \
  --dit-layerwise-offload --dit-offload-prefetch-size 0.1 \
  --text-encoder-cpu-offload true --vae-cpu-offload true \
  --prompt "..." --save-output

Maximum speed, lossy native path (SageAttention + Cache-DiT)

SGLANG_CACHE_DIT_ENABLED=true sglang generate --model-path <MODEL> \
  --attention-backend sage_attn \
  --dit-layerwise-offload false \
  --enable-torch-compile --warmup \
  --prompt "..." --save-output

Add native Cache-DiT knobs such as SGLANG_CACHE_DIT_SCM_PRESET=medium, SGLANG_CACHE_DIT_RDT=0.24, or SGLANG_CACHE_DIT_TAYLORSEER=true only after you have a BF16 baseline output to compare against.

For a diffusers-backend Cache-DiT YAML/JSON config baseline, make the fallback explicit:

sglang generate --backend diffusers --model-path <MODEL> \
  --cache-dit-config <config.yaml> \
  --dit-layerwise-offload false \
  --prompt "..." --save-output

---

Model-Specific Starting Points

Use these as first commands to benchmark, not as universal winners.

Model family	First performance shape	Starting flags	Notes
FLUX.1 / FLUX.2 image	1024x1024, runtime-default steps/guidance, 1 GPU	--enable-torch-compile --warmup --dit-layerwise-offload false	black-forest-labs/FLUX.* repos are gated; for FP8/NVFP4 use validated --transformer-path or --transformer-weights-path flows from the quant skill.
FLUX.2 Klein / Klein Base	1024x1024, runtime-default steps/guidance, 1 GPU	--enable-torch-compile --warmup --dit-layerwise-offload false	Current registry has black-forest-labs/FLUX.2-klein-4B, FLUX.2-klein-9B, and base variants. Klein is step-distilled; Klein Base is not.
Qwen-Image / Qwen-Image-Edit	1024x1024, runtime-default steps/guidance, 1 GPU	--enable-torch-compile --warmup; optionally native SGLANG_CACHE_DIT_ENABLED=true	Cache-DiT is lossy. For edit tasks, keep reference image, seed, and output size fixed.
Z-Image / Z-Image-Turbo	1024x1024, runtime-default steps/guidance, 1 GPU	--enable-torch-compile --warmup	Keep base Z-Image separate from Turbo: base uses 50-step CFG defaults, Turbo uses 9-step zero-CFG defaults. Mainline has Z-Image tanh/gate norm fusions.
Wan2.2 A14B T2V/I2V	1280x720, 81 frames	Nightly: --num-gpus 4 --enable-cfg-parallel --ulysses-degree 2 --text-encoder-cpu-offload --pin-cpu-memory	For lowest latency, also benchmark pure Ulysses on the same GPUs.
Wan2.2 TI2V 5B	1280x720, 81 frames, 1 GPU	--enable-torch-compile --warmup	Keep the input image and motion prompt fixed when comparing sparse attention or Cache-DiT.
Wan2.1 / FastWan / TurboWan variants	480p or 720p video, family defaults	--enable-torch-compile --warmup; add --ulysses-degree / CFG parallel only after measuring	Current registry includes Wan2.1, FastWan2.1, FastWan2.2 TI2V, TurboWan2.1, TurboWan2.2 I2V, and Wan2.1-Fun InP. Use the compatibility matrix and benchmark presets before choosing topology.
Cosmos3 Nano / Super	T2I: 1024x1024 with --num-frames 1; T2V/I2V: 480p/720p video	SGLANG_DISABLE_COSMOS3_GUARDRAILS=1 for benchmark isolation; --enable-torch-compile --warmup	One checkpoint serves T2I/T2V/I2V. Mode is request-driven: num_frames == 1 means T2I, --image-path means I2V.
Ideogram 4 FP8/NVFP4	1024x1024, native preset defaults	--enable-torch-compile --warmup	Do not set --num-inference-steps or --guidance-scale directly unless you also update the Ideogram preset; sampling params derive them from preset.
ERNIE-Image / GLM-Image / SANA / SD3	1024-class image, family defaults	--enable-torch-compile --warmup; disable offload only after checking VRAM	Treat these as current native image families. Start with benchmark/profile presets for ERNIE, GLM, and SANA; use registry/config defaults for SD3 unless you add a new preset.
LTX-2 / LTX-2.3	768x512 or HQ 1920x1088, 121 frames	--pipeline-class-name LTX2TwoStagePipeline --enable-torch-compile --warmup; HQ uses LTX2TwoStageHQPipeline and --ltx2-two-stage-device-mode snapshot by default	Use benchmark/profile presets for nightly alignment, one-stage, high-resolution stress, and HQ. Device mode choices are original, snapshot, and resident; resident is fastest but uses more VRAM.
HunyuanVideo	848x480 or 720p class video	--text-encoder-cpu-offload --pin-cpu-memory --enable-torch-compile --warmup	Check VAE decode separately. GroupNorm+SiLU is default-eligible in mainline when wrapper guards pass; use bench_group_norm_silu.py when VAE residual blocks are hot.
JoyAI-Image-Edit	1024-class TI2I, 40 steps, guidance 4.0	--backend=sglang --num-gpus 2 --enable-cfg-parallel --ulysses-degree 1 --enable-torch-compile --warmup --dit-layerwise-offload false --dit-cpu-offload false	Newly supported image-edit path. Keep the input image, prompt, seed, and output size fixed; 2-GPU CFG parallel is the validated H100 starting point.
FireRed-Image-Edit 1.0 / 1.1	1024x1024 image edit, 40 steps, guidance 4.0	--backend=sglang --num-gpus 2 --enable-cfg-parallel --ulysses-degree 1 --enable-torch-compile --warmup --dit-layerwise-offload false --dit-cpu-offload false	Uses the native QwenImageEditPlusPipeline path. 2-GPU CFG parallel is the validated H100 starting point; benchmark 1.0 and 1.1 separately because checkpoint differences can change denoise latency.
Hunyuan3D-2 shape	Shape generation, 50 steps, guidance 5.0	--backend=sglang --enable-torch-compile --warmup --dit-layerwise-offload false --dit-cpu-offload false	Focus on Hunyuan3DShapeDenoisingStage; keep mesh export/paint timings separate from denoise.
MOVA / Helios / LingBot World	Use the benchmark/profile presets or server test cases first	--enable-torch-compile --warmup; pin offload and topology flags explicitly	These video/realtime families have model-specific stages and condition handling. Keep prompt/image/action inputs fixed and prefer perf dumps over wall time alone.

Historical PR Watchlist

Treat these performance PRs as direction and prior art only. Re-check the PR state and the active source tree before relying on any path, flag, or claim about whether the work has merged:

• Fusion/kernel: #24025 LTX2 QK norm, #24059 Helios norm modulation, #24117 Z-Image packed QKV, #19488 Wan elementwise cross-block fusion, #19249 Z-Image gate/norm fusion, #20429 Qwen-Image layernorm/modulation, #20530 MOVA RMSNorm+RoPE.
• VAE/decode: #22531 LTX2 parallel VAE, #20927 batched tiled VAE decode.
• Runtime/parallel/cache: #22805 FLUX.2 packed QKV for A2A, #21742 hybrid attention schedule, #24053 USP replicated-prefix fix, #21613 TeaCache refactor, #24227 WanVideo TeaCache fix, #18764 dynamic batching, #24200 disaggregated diffusion.

Tips

• Benchmarking: always use --warmup and look for the line ending with (with warmup excluded) for accurate timing.
• Perf dump: use --perf-dump-path result.json to save structured metrics, then compare with python python/sglang/multimodal_gen/benchmarks/compare_perf.py baseline.json result.json.
• Offload tuning: after the first request, the runtime logs peak GPU memory and which components could stay resident. Use this to decide which --*-cpu-offload flags to disable.
• Backend selection: --backend sglang (default, auto-detected) enables native optimizations (fused kernels, SP, native Cache-DiT env knobs, etc.). --backend diffusers falls back to Diffusers pipelines and is the path that accepts --cache-dit-config plus diffusers attention backend names.
• Wan2.2-I2V sizing: explicit --width/--height on Wan2.2-I2V-A14B control the target area while preserving the condition-image aspect ratio.
• Mainline diffusion fast paths: before proposing a new kernel or overlap scheme, check sglang-diffusion-benchmark-profile/existing-fast-paths.md. It covers GroupNorm+SiLU, Z-Image residual-form modulation, fused diffusion QK norm + RoPE, LTX2 split RoPE, varlen USP pack/scatter, packed QKV/NVFP4 expectations, and existing multi-GPU overlap families such as Ulysses / USP and turbo-layer async all-to-all.
• NVFP4 trace interpretation: on FLUX.2 NVFP4 and Nunchaku-style checkpoints, packed QKV is expected. SGLang intentionally uses fused projection modules such as to_qkv / to_added_qkv instead of separate to_q / to_k / to_v, so a split-QKV trace usually means the quantized path did not engage rather than a brand new fusion opportunity.
• Hotspot workflow split: use sglang-diffusion-benchmark-profile to prove and classify a slowdown with perf dumps plus torch.profiler; hand concrete kernel work off with the perf/profile evidence attached instead of expanding the benchmark skill.