allxon-setup

name	allxon-setup
description	Install and configure Allxon DMS agent on NVIDIA Jetson devices for remote monitoring and management via the Allxon cloud portal. Supports JetPack 4.6+.

Allxon DMS Setup on Jetson

Allxon is an edge device management solution for remote monitoring and management of Jetson devices via a cloud portal. Installation is a single command.

Hardware: Any NVIDIA Jetson device, OOB Enabler (optional for out-of-band management) Software: JetPack 4.6+, internet connection

---

Execution model

Run one phase at a time. After each phase:

• If output contains [STOP] → stop immediately, consult the failure decision tree
• If output ends with [OK] → tell the user "Phase N complete" and proceed

---

Phase 1 — prerequisites check (~30 s)

cat /etc/nv_tegra_release

Confirm JetPack 4.6 or later. Check internet:

ping -c 2 get.allxon.net

[OK] when JetPack version confirmed and internet works. [STOP] if JetPack < 4.6 or no internet.

---

Phase 2 — create Allxon account (human action)

Ask the user: "Do you already have an Allxon DMS account?"

If no:

1. Sign up at: https://dms.allxon.com/next/signup
2. Verify account via activation email
3. Create a password

[OK] when user confirms they have an account.

---

Phase 3 — install Allxon DMS agent (~2 min)

sudo wget -qO - "https://get.allxon.net/linux/standard" | sudo bash -s

During installation, it will ask whether to install Trend Micro IoT Security (3-month free trial). User can choose Y or N.

Verify agent is running:

systemctl status allxon-dms-agent

[OK] when agent is active/running.

---

Phase 4 — get pairing code (~30 s)

CLI method:

dms-get-pairing-code

Or GUI method: press Ctrl + Shift + B on the Jetson desktop to open the agent window, then click "Get device pairing code".

[OK] when pairing code is obtained.

---

Phase 5 — pair device with portal (~1 min)

1. Login to https://dms.allxon.com/next/signin
2. Click Devices → + Add Device
3. Enter the pairing code from Phase 4
4. Click Next to complete pairing

[OK] when device appears in the Allxon DMS Portal.

---

Failure decision tree

Symptom	Action
wget install script fails	Check internet. Verify get.allxon.net is reachable. Try with sudo.
Agent not running after install	Run sudo systemctl start allxon-dms-agent. Check logs with journalctl -u allxon-dms-agent.
GUI agent doesn't appear	Press Ctrl + Shift + B to start it. Or use CLI dms-get-pairing-code.
Pairing code rejected	Ensure device has internet. Regenerate code and try again.
Device not showing in portal	Wait 1–2 minutes. Refresh the portal page. Check agent status.

---

Uninstall

sudo systemctl disable dms-install.service
sudo wget -qO - "https://get.allxon.net/linux/uninstall" | sudo bash -s

---

Reference files

• references/source.body.md — Original Seeed wiki with screenshots and wiring diagrams