test-plan-design

name	test-plan-design
description	How to design a test plan — scope and risk-based prioritization, the test pyramid, case-design techniques (equivalence partitioning, boundary values, decision tables), entry/exit criteria, coverage and requirement traceability, test data and environments. Deep reference with a runnable coverage-gap check.
type	skill
version	2.0.0
updated	"2026-06-29T00:00:00.000Z"

Test Plan Design

A test plan is a budget: finite effort spent where it prevents the most expensive failures. The goal is never "test everything" — that is impossible and economically illiterate. The goal is to make a defensible decision about what to test, at which layer, with which cases, and when you are done. This skill is the deep reference for that decision. Heavy detail lives in references/; copy-paste material in examples/; a runnable traceability check in scripts/.

Mental model

You are allocating scarce attention across a feature. Four questions drive every plan:

Question	Answer comes from
What matters most?	risk = impact × likelihood (scope & prioritization)
At which layer do I test it?	the test pyramid (unit / integration / E2E)
Which concrete cases?	case-design techniques (partitions, boundaries, decision tables)
When am I done?	exit criteria + coverage traced to requirements

Skip any one of these and the plan degrades: no risk ranking and you over-test trivia; no case design and you write five tests that all exercise the same path; no traceability and you ship a requirement nobody verified.

1. Scope and risk-based prioritization

Start by listing what the feature must do, then rank each item by risk = impact × likelihood.

• Impact: what does failure cost? Money movement, data loss, security, and legal/compliance are top-tier; cosmetic glitches are bottom-tier.
• Likelihood: how probable is a defect? New code, complex logic, many integrations, and unclear requirements raise it; stable, simple, well-understood code lowers it.

Spend the most rigor at the top of the ranked list and explicitly decide to under-test the bottom. Writing down "we are not testing X because it is low-risk" is a feature of a good plan, not a gap. The full scoring rubric and a worked heat-map live in references/risk-prioritization.md.

2. The test pyramid — choosing a layer

Each behavior should be tested at the lowest layer that can meaningfully verify it. Lower layers are faster, cheaper, and more precise about where a defect is.

        /\        E2E        few   — full user journeys, real-ish stack, slow & flaky
       /  \       Integration some — module + its collaborators (DB, gateway, queue)
      /____\      Unit         many — one function/class, no I/O, milliseconds

• Unit: pure logic — pricing math, validation, state machines. No network, no DB. Run in ms.
• Integration: a module talking to a real (or faithfully faked) collaborator — a repository hitting a test DB, a client calling a mocked gateway with success/decline/timeout responses.
• E2E: a thin layer covering only critical journeys end to end (e.g. "add to cart → pay → confirm").

The classic anti-pattern is the inverted pyramid (an "ice-cream cone"): many slow E2E tests and few units. It is slow, flaky, and tells you that something broke but not where. Layer-selection heuristics and the integration/contract-test distinction are in references/test-pyramid.md.

3. Case-design techniques

For each unit under test, do not invent cases ad hoc — derive them. Three techniques cover the vast majority of input-space reasoning:

• Equivalence partitioning: split the input domain into classes that should behave identically, then test one representative per class. If ages 18–65 are all "standard", you need one value from that band, not forty.
• Boundary value analysis: bugs cluster at edges. For a valid range [18, 65], test 17, 18, 19 and 64, 65, 66 — just-below, on, and just-above each boundary. Off-by-one errors live here.
• Decision tables: when output depends on a combination of conditions, enumerate the combinations so no rule is missed.

Discount rules (decision table)
Member? | Cart ≥ $100 | Coupon valid | → Discount
  no    |    no       |    no         |   0%
  no    |    yes      |    no         |   5%
  yes   |    no       |    no         |  10%
  yes   |    yes      |    yes        |  25%   ← interaction case, easy to miss

A worked example combining all three on one function is in references/case-design.md, and a ready-to-fill case template is in examples/test-case-template.md.

4. Entry and exit criteria

Make "ready to test" and "ready to ship" explicit so the plan ends on data, not vibes.

• Entry criteria (can we start?): code merged to the test branch, build green, test environment and seed data available, dependencies/stubs deployed.
• Exit criteria (can we stop?): all planned cases executed; all CRITICAL/HIGH-risk requirements have a passing test; coverage target met (e.g. 80% line on changed code); zero open Sev-1/Sev-2 defects; known issues triaged and accepted by the owner.

Exit criteria are the contract that prevents both premature shipping and endless gold-plating.

5. Coverage and traceability to requirements

Coverage has two distinct meanings — track both:

1. Code coverage (line/branch): a necessary signal, not a sufficient one. 100% line coverage with zero assertions proves nothing.
2. Requirement coverage: every requirement maps to at least one test that verifies it. This is the one that catches "we built it but nobody tested it."

Maintain a traceability matrix (requirement ↔ test case). The runnable check scripts/coverage-gaps.mjs takes your requirements and test cases as JSON and lists any requirement with no covering test — run it in CI so an untested requirement fails the build. See examples/test-plan.md for a filled matrix.

6. Test data and environments

• Data: prefer small, purpose-built fixtures over a copy of production. Cover the equivalence classes and boundaries from §3. Never use real PII in test data — synthesize it. Make data setup deterministic and self-cleaning so tests are independent and order-free.
• Environments: keep a dedicated, reproducible test environment (containers/IaC) so "works on my machine" is not a defense. Pin external dependencies via fakes/contract tests; do not let a flaky third-party sandbox gate your pipeline.

Common pitfalls (failure modes)

• Testing everything equally — no risk ranking, so trivial getters get the same attention as the payment path. Rank first.
• Inverted pyramid — leaning on slow, flaky E2E for logic that a unit test would pin precisely.
• Coverage theater — chasing a line-coverage number with assertion-free tests; green bar, no safety.
• Redundant cases — five tests in the same equivalence class, zero at the boundary where the bug is.
• No traceability — a requirement ships with no test because nothing connected the two.
• Non-deterministic data/time — tests depend on "today" or shared mutable rows and fail intermittently.
• Vague exit criteria — "looks good" instead of measurable gates, so testing ends by exhaustion.

When NOT to use / trade-offs

A heavyweight, document-driven test plan is overkill for a one-line bug fix or a throwaway spike — there, a couple of targeted tests and a green CI run are the proportionate response. Formal test plans earn their cost on high-risk, multi-team, regulated, or long-lived features. Likewise, exhaustive case enumeration is wasteful on low-risk surfaces; reserve decision tables and full boundary analysis for logic where a defect is expensive. The plan should be proportional to risk — a plan that costs more than the failures it prevents is itself a failure. For ongoing change to an existing suite (what to re-run after a change, how to fight flakiness over time), that is a different discipline — see the pairing below.

Files in this package

• references/risk-prioritization.md — risk scoring rubric, impact/likelihood matrix, worked heat-map
• references/test-pyramid.md — layer-selection heuristics, integration vs contract tests, anti-patterns
• references/case-design.md — equivalence partitioning, boundary analysis, decision tables, worked example
• examples/test-plan.md — a complete, filled-in test plan with a traceability matrix
• examples/test-case-template.md — a reusable single-test-case template
• scripts/coverage-gaps.mjs — runnable check: lists requirements with no covering test (--selftest)

Pairs with the qa-strategist agent, the test-author agent, and the regression-strategy skill.