Menü
Recover a temporarily lost target in the laboratory with bounded planar search and no blind forward motion.
Mit Codex oder Claude installieren Kopieren Sie diesen Prompt, fügen Sie ihn in Codex, Claude oder einen anderen Assistant ein und lassen Sie die Skill-Seite prüfen und installieren.
Basierend auf der SOC-Berufsklassifikation
Fly around a visible target and station directly above it at a safe distance. Use for reposition tasks that must end overhead of the target rather than in front of it.
Always-on operational baseline for SpaceMind. Defines shared coordinates, action policy, safety guards, observability rules, and perception workflow for all tasks.
Image-first laboratory navigation policy for ground-robot experiments. Use when the task must be solved with raw current images, conservative motion, and no oracle geometry.
Safely approach a visible laboratory satellite target and stop in a conservative near-front hold using only current images and motion tools.
Diagnose the laboratory target from raw image evidence, conservative viewpoint changes, and optional code support.
Find the satellite with bounded image-only search and then approach it conservatively to a safe near-front stop.
| name | lab-target-recovery |
| description | Recover a temporarily lost target in the laboratory with bounded planar search and no blind forward motion. |
| metadata | {"skill_kind":"helper","routing_summary":"Add when the target may leave the camera view and a bounded image-only recovery policy is needed.","routing_keywords":["target lost","recovery","reacquire target","search policy","bounded yaw search"]} |
If the target was just lost after a specific action (e.g., a yaw or position change), first reverse that exact action to return to the state where the target was last visible. For example:
set_attitude(0, 0, +15) → try set_attitude(0, 0, -15)set_position(dx=0.1, dy=0, dz=0) → try set_position(dx=-0.1, dy=0, dz=0)After the reverse, re-check the image. If the target reappears, re-center it and resume the mission.
If reversal does not help, use the last known relative direction with small yaw corrections (10-15°):
set_attitude(0, 0, +15)set_attitude(0, 0, -15)If the target is still visible but merely off-center, prefer a small yaw correction to re-center it before any forward motion.
If there is no reliable last known direction and reversal did not work, sweep yaw from the loss heading to cover ±90°. First go one direction (e.g. right to +90°), then turn past the loss heading and continue to the opposite side (e.g. -90°). Remember that yaw deltas accumulate: from +90°, three steps of -30° only returns to 0°, not to -90° — you must keep going. Check the image after every step.