Jeden Skill in Manus ausführen
mit einem Klick

Jeden Skill in Manus mit einem Klick ausführen

cad-modeling

Generate parametric 3D CAD models using OpenSCAD scripting language. Create cubes, cylinders, spheres, extrusions, boolean operations, and complex assemblies from code.

In Manus ausführen

Überblick

Generate parametric 3D CAD models using OpenSCAD scripting language. Create cubes, cylinders, spheres, extrusions, boolean operations, and complex assemblies from code.

Installationsbefehl

npx skills add https://github.com/00000star/AGI_engineering_forge --skill cad-modeling

Kopieren Sie diesen Befehl und fügen Sie ihn in Claude Code ein, um den Skill zu installieren

Quelle

00000star/AGI_engineering_forge

Sterne0

Forks0

Aktualisiert26. März 2026 um 19:32

SKILL.md

readonly

name	cad-modeling
description	Generate parametric 3D CAD models using OpenSCAD scripting language. Create cubes, cylinders, spheres, extrusions, boolean operations, and complex assemblies from code.
metadata	{"openclaw":{"emoji":"📐","requires":{"anyBins":["python3"]}}}

CAD Modeling with OpenSCAD

Generate parametric 3D geometry from code. Produces .scad files (and .stl if OpenSCAD binary is installed).

Usage

python3 /workspace/bridge.py openscad '
// Parametric bracket
thickness = 5;
width = 30;
height = 40;
hole_d = 6;

difference() {
    cube([width, thickness, height]);
    translate([width/2, -1, height - 15])
        rotate([-90, 0, 0])
            cylinder(h=thickness+2, d=hole_d, $fn=32);
}
'

Best Practices

Always parameterize dimensions (no magic numbers)
Use $fn=32 or higher for smooth curves
Comment design intent
Export to STEP/STL when manufacturing
Use module for reusable components

Mehr aus diesem Repository

gleiches Repository

circuit-design

00000star/AGI_engineering_forge

Analytical circuit design and simulation — voltage dividers, RC/RL/RLC filters, power calculations, impedance analysis, transfer functions. Uses sympy for symbolic analysis and numpy for numerical.

2026-03-260

flight-controls

00000star/AGI_engineering_forge

Design and simulate control systems — transfer functions, PID controllers, Bode plots, root locus, stability analysis, state-space modeling. Uses scipy.signal and sympy.

2026-03-260

forge-engineering

00000star/AGI_engineering_forge

Run a complete engineering project through Forge's 8-phase autonomous pipeline. Decomposes any idea into subsystems, assigns specialist agents, produces real artifacts (CAD, firmware, schematics, BOMs), and iterates until the design works.

2026-03-260

structural-analysis

00000star/AGI_engineering_forge

Perform real structural engineering calculations — beam deflection, stress analysis, buckling, safety factors. Uses numpy and scipy with built-in helper functions.

2026-03-260

tool-fabricator

00000star/AGI_engineering_forge

When no existing engineering tool fits the problem, the fabricator creates a new one from scratch. Designs, writes, tests, and registers new computational tools at runtime. This is the AGI capability.

2026-03-260

Quelle

00000star

00000star/AGI_engineering_forge

GitHub-Repository öffnen Creator-Repositorys ansehen

Installationsbefehl

Download

In Manus ausführen

Nützlich fürSOC

SoftwareentwicklerInformatik- und Mathematikberufe15-1252L4

name	cad-modeling
description	Generate parametric 3D CAD models using OpenSCAD scripting language. Create cubes, cylinders, spheres, extrusions, boolean operations, and complex assemblies from code.
metadata	{"openclaw":{"emoji":"📐","requires":{"anyBins":["python3"]}}}

CAD Modeling with OpenSCAD

Generate parametric 3D geometry from code. Produces .scad files (and .stl if OpenSCAD binary is installed).

Usage

python3 /workspace/bridge.py openscad '
// Parametric bracket
thickness = 5;
width = 30;
height = 40;
hole_d = 6;

difference() {
    cube([width, thickness, height]);
    translate([width/2, -1, height - 15])
        rotate([-90, 0, 0])
            cylinder(h=thickness+2, d=hole_d, $fn=32);
}
'

Best Practices

Always parameterize dimensions (no magic numbers)
Use $fn=32 or higher for smooth curves
Comment design intent
Export to STEP/STL when manufacturing
Use module for reusable components