visual-verification

name	visual-verification
description	Verify application UI changes with uploaded screenshot or video artifacts

visual-verification

Use this skill when the goal is to verify UI changes inside the application and return visual evidence in the Open-Inspect session.

agent-browser remains the low-level browser tool. This skill defines the workflow contract for using it reliably.

Key Fact

upload-media is a bash command installed on PATH. Run it with your Bash tool, not as an MCP tool or tool binding. For videos, use agent-browser record directly, then probe and upload the resulting MP4 with upload-media.

When To Use It

• Verify a UI change after editing code
• Capture before/after screenshots for comparison
• Confirm responsive layout differences at a chosen viewport
• Produce an uploaded screenshot or short video artifact the user can review in-session

Success Criteria

The task is not complete until all of these are true:

1. The changed UI is opened in the browser.
2. The capture mode is chosen explicitly: viewport screenshot, full-page screenshot, or video.
3. The viewport is set explicitly or reported as a deliberate default.
4. A screenshot or video is uploaded in the same prompt.
5. The returned artifactId is reported back to the user.
6. The response states what was verified and what dimensions/mode were used.

Required Workflow

1. Open the target page with agent-browser open.
2. If viewport matters, set it explicitly with agent-browser set viewport <width> <height>.
3. Wait for the page to settle before capture.
4. Choose one of:
   • Viewport screenshot for above-the-fold or device-specific review
   • Full-page screenshot for full document review
   • Video recording for interaction flows, animations, transitions, or multi-step behavior
5. Upload the capture immediately with matching metadata.
6. Report the result with the artifact ID and actual capture settings.

Default Decision Rules

• Use a viewport screenshot when validating a specific visible state, modal, interaction, or desktop/mobile layout.
• Use a full-page screenshot when the user asks for the whole page or when vertical content is part of the verification.
• If the user names a device or screen size, set the viewport explicitly.
• If the user does not specify dimensions and layout matters, choose a reasonable viewport and report it.
• If the screenshot is intended to prove a fix, prefer stating exactly what was checked, not only that a screenshot was taken.
• Use a video when the proof depends on seeing interaction over time, such as opening a menu, dragging, typing, navigating between states, or watching an animation complete.

Using Screenshots From Other Sources

If the screenshot already exists as a file — for example, captured via Playwright MCP (playwright_browser_take_screenshot), a manual capture, or any other tool — skip the agent-browser steps and upload the file directly:

upload-media /path/to/existing-screenshot.png \
  --caption "Description of what was captured" \
  --source-url "$URL"

Add --full-page or --viewport '{"width":1512,"height":982}' as appropriate. The same reporting template and guardrails below still apply.

For a dedicated upload-only workflow, see the upload-screenshot skill.

Recommended Commands

Viewport capture:

agent-browser open "$URL" && \
agent-browser set viewport 1512 982 && \
agent-browser wait 2000 && \
agent-browser screenshot --json /tmp/verify.png && \
upload-media /tmp/verify.png \
  --caption "UI verification screenshot" \
  --source-url "$URL" \
  --viewport '{"width":1512,"height":982}'

Full-page capture:

agent-browser open "$URL" && \
agent-browser set viewport 1512 982 && \
agent-browser wait 2000 && \
agent-browser screenshot --full --json /tmp/verify-full.png && \
upload-media /tmp/verify-full.png \
  --caption "Full-page verification screenshot" \
  --source-url "$URL" \
  --viewport '{"width":1512,"height":982}' \
  --full-page

Annotated capture for review/debugging:

agent-browser open "$URL" && \
agent-browser wait 2000 && \
agent-browser screenshot --annotate --json /tmp/verify-annotated.png && \
upload-media /tmp/verify-annotated.png \
  --caption "Annotated UI verification screenshot" \
  --source-url "$URL" \
  --annotated

Video recording for interaction flows:

set -e
agent-browser open "$URL"
agent-browser set viewport 1512 982
agent-browser snapshot -i

STARTED_AT_MS=$(date +%s%3N)
agent-browser record start /tmp/opencode/menu-recording.mp4
recording_started=1
cleanup_recording() {
  if [ "${recording_started:-0}" = "1" ]; then
    agent-browser record stop || true
  fi
}
trap cleanup_recording EXIT

interaction_exit_code=0
agent-browser click "[data-testid=settings]" || interaction_exit_code=$?
agent-browser wait 1000 || interaction_exit_code=$?

agent-browser record stop
recording_started=0
trap - EXIT

ENDED_AT_MS=$(date +%s%3N)
PROBE_JSON=$(ffprobe -v error -print_format json -show_streams -show_format /tmp/opencode/menu-recording.mp4)
DURATION_MS=$(node -e 'const p=JSON.parse(process.argv[1]); const v=(p.streams||[]).find((s)=>s.codec_type==="video")||{}; const d=Number(v.duration ?? p.format?.duration); console.log(Math.max(1, Math.round(d * 1000)));' "$PROBE_JSON")
DIMENSIONS=$(node -e 'const p=JSON.parse(process.argv[1]); const v=(p.streams||[]).find((s)=>s.codec_type==="video")||{}; console.log(JSON.stringify({width:Number(v.width),height:Number(v.height)}));' "$PROBE_JSON")
upload-media /tmp/opencode/menu-recording.mp4 \
  --artifact-type video \
  --caption "Menu interaction recording" \
  --source-url "$URL" \
  --duration-ms "$DURATION_MS" \
  --recording-started-at "$STARTED_AT_MS" \
  --recording-ended-at "$ENDED_AT_MS" \
  --dimensions "$DIMENSIONS" \
  --truncated false \
  --has-audio false
exit "$interaction_exit_code"

Reporting Template

Include the following in the final response:

• What UI change or state was verified
• Whether the capture was viewport, full-page, or video
• The viewport used
• The source URL
• The uploaded artifact ID
• Any limitation, such as auth gating, loading issues, or unverified states

Example:

Verified the updated settings page header.
Capture mode: viewport
Viewport: 1512x982
Source: http://127.0.0.1:3000/settings
Uploaded artifact: abc123

Guardrails

• Do not claim the screenshot or video was uploaded unless the upload command returned an artifact ID.
• Do not report viewport metadata you did not explicitly set or verify.
• Do not use upload-media in a later prompt; it is prompt-scoped.
• Do not leave an active recording open. Always run agent-browser record stop if a recording was started.
• If the user asked for a full-page screenshot, do not use viewport-only capture.
• If the UI requires interaction before it matches the expected state, perform that interaction before capturing.
• For video metadata, use the encoded MP4 dimensions and duration from ffprobe; do not reuse the requested viewport as video dimensions.
• Prefer stable selectors such as [data-testid=...], [data-clear-completed], or #todo-title. Run agent-browser snapshot -i before recording when selectors or accessible names are uncertain.

Relationship To agent-browser

• Use agent-browser directly for open-ended browsing, debugging, auth flows, snapshots, and custom inspection.
• Use visual-verification when the deliverable is proof that a UI change works and the user should receive an uploaded screenshot or video artifact.