dynamic-stability-mitigation

name	dynamic-stability-mitigation
description	Senior power-engineer playbook for dynamic stability problems. Use when eigenvalue or time-domain studies show poor damping, transient angle instability, weak voltage recovery, or related dynamic-performance issues in tools such as ANDES or PSSE.

Dynamic stability mitigation

Start only after the disturbance, monitored channels, and failing metric are explicit.

Preferred action order

1. Confirm the models and event setup are credible: machine data, control models, fault location, clearing time, and initial dispatch.
2. Reduce the stressed transfer or dispatch pattern that drives the instability.
3. Improve controls: AVR, PSS, governor, FACTS, or dynamic VAR support.
4. Improve protection or switching performance if clearing time is the binding issue.
5. Consider RAS, fast valving, braking resistors, or controlled load shedding only with explicit trigger logic.

Working rules

• Use eigenvalues to screen and time-domain simulation to confirm.
• Separate angle instability, oscillatory instability, and voltage recovery problems; they do not share the same fix order.
• Re-check the steady-state dispatch after major control or topology changes.

Deliver

• The failing mode or scenario.
• The mitigation sequence that should be tried.
• The first credible fix and the remaining validation needed.