convert-to-backtest

name	convert-to-backtest
description	Convert an optimiser or grid search notebook into a standalone backtest notebook using the bundled helper script and mapping guidance.

Convert optimiser to backtest

Convert an optimiser or grid search notebook into a standalone backtesting notebook that runs a single backtest with the best parameter values from the optimisation.

Input

• Path to an optimiser notebook (.ipynb)
• Best parameter values (provided by user or extracted from saved cell outputs)

Reference files

• Reference backtest notebook: getting-started/scratchpad/vault-of-vaults/30-waterfall-diversified-larger-universe.ipynb
• Reference optimiser notebook: getting-started/scratchpad/vault-of-vaults/33-hyperliquid-only-grid-search-4d-rebalance-profit.ipynb

Helper script

A Python script build_backtest_notebook.py (in the same directory as this skill) handles the mechanical parts of the conversion: stripping outputs, replacing Categorical parameters, restoring indicator inline calculation, and removing skopt imports. It produces a partial notebook (cells up to the optimiser section) that still needs manual steps for decide_trades() simplification, chart registry, and output cells.

Steps

1. Read the input optimiser notebook and the cell-by-cell mapping section below.

2. Read the reference backtest notebook (getting-started/scratchpad/vault-of-vaults/30-waterfall-diversified-larger-universe.ipynb) — you will copy output cells from this.

3. Determine best parameter values: Check the optimiser notebook for saved cell outputs in the results table cell. If the notebook has outputs, extract the best row's parameter values. If there are no saved outputs, ask the user to provide the best parameter values for each Categorical(...) / Integer(...) / Real(...) parameter. List all searchable parameters found in the Parameters class so the user knows which values to provide.

4. Create the backtest notebook with these cells in order:

   a. Title cell (markdown): Remove "parameter search" / "grid search" / "optimise for ..." from the title. Below the title, add a preface section that includes:

   • A note referencing the source optimiser notebook by filename
   • A markdown table of the selected parameter values, listing each parameter that was a Categorical/Integer/Real in the optimiser and its chosen best value

   Example:

   # Hyperliquid-only vault of vaults strategy
   
   - Rerun of the best result from `33-hyperliquid-only-grid-search-4d-rebalance-profit.ipynb`
   
   | Parameter | Value |
   |-----------|-------|
   | max_assets_in_portfolio | 20 |
   | max_concentration | 0.10 |
   | rolling_returns_bars | 60 |
   | weighting_method | rolling_returns |
   | weight_function | weight_equal |
   | waterfall | True |
   | volatility_window | 180 |
   

   b. Setup cells (markdown + code): Copy as-is from the optimiser.

   c. Chain config cells (markdown + code): Copy as-is from the optimiser.

   d. Parameters cell (code): Transform from the optimiser version:

   • Remove from skopt.space import Categorical (and Integer, Real if present)
   • Replace each Categorical([v1, v2, ...]) with the single best value as a native Python type (int, float, str, or bool)
   • Replace each Integer(low, high) with the single best integer value
   • Replace each Real(low, high) with the single best float value
   • Keep dispatch parameters (weighting_method, weight_function, waterfall, etc.) as fixed values in the class for traceability
   • Remove display_parameters(parameters) and its from tradeexecutor.strategy.parameters import display_parameters import at the end of the cell
   • If use_managed_yield = False was set specifically for the optimiser, ask the user whether to restore it to True

   e. Trading universe cells (markdown + code): Copy as-is from the optimiser (create_trading_universe() function).

   f. Indicators cell (markdown + code): Copy from the optimiser but add back the calculate_and_load_indicators_inline() call at the end of the cell, after display_indicators(indicators):

   # Calculate all indicators and store the result on disk
   indicator_data = calculate_and_load_indicators_inline(
       strategy_universe=strategy_universe,
       create_indicators=indicators.create_indicators,
       parameters=parameters,
   )
   

   Ensure the import is present at the top of the cell:

   from tradeexecutor.strategy.pandas_trader.indicator import calculate_and_load_indicators_inline
   

   g. Trading universe charts cell (markdown + code): Add a ChartRegistry setup cell copied from the reference backtest notebook (cell 13). This cell defines chart functions and registers them. It must come after the indicators cell because it uses indicator_data. Adapt chart function definitions to match the strategy (e.g. trading_pair_breakdown_with_chain, all_vault_positions_by_profit).

   Tip: If the optimiser notebook has a "Backtesting chart rendering for the best strategy" cell later in the notebook, use its chart function definitions — they are already adapted to the strategy. Move them here instead.

   h. Pre-backtest visualisation cells: Copy from the reference backtest notebook — cells for available pairs, inclusion criteria checks, vault TVL data, signal charts, etc. These come after the chart registry cell and before the time range cell.

   Important — indicator name mismatch: The reference backtest may use a unified "signal" indicator in its chart cells (e.g. indicator_data.get_indicator_series("signal", pair=pair)). Optimiser notebooks often do not define a signal indicator — they use individual indicators like "rolling_returns", "rolling_sharpe", etc. directly. When copying pre-backtest chart cells, replace any "signal" references with the actual indicator name that matches the best weighting_method. For example, if weighting_method = "rolling_returns", change get_indicator_series("signal", ...) to get_indicator_series("rolling_returns", ...).

   i. Time range cell (markdown + code): Copy from the optimiser. If it uses simple Parameters.backtest_start / Parameters.backtest_end, keep as-is. Optionally restore indicator_data references if the reference backtest uses them.

   j. Strategy cell (code): Copy decide_trades() from the optimiser with these simplifications:

   • Remove float() casts: Parameters are now native Python types, not numpy.float64 from Categorical. Change float(parameters.max_concentration) back to parameters.max_concentration.

   • Simplify dynamic dispatch to direct calls: If decide_trades() dispatches based on string parameters like weighting_method or weight_function, replace the dispatch with the direct call using the best value. For example, if the best weight_function is "weight_equal", replace the entire weight_func_map lookup with alpha_model.assign_weights(method=weight_equal). Remove unused branches and dead code (e.g. pair_volatilities tracking if inverse_volatility was not selected).

   • Simplify boolean parameters: If the optimiser passed waterfall=parameters.waterfall, replace with the literal best value (e.g. waterfall=True).

   • Add run_backtest_inline() call after decide_trades() in the same cell:

     Critical — cycle duration mismatch: The grid search internally uses CycleDuration.from_timebucket(candle_time_bucket) to determine the cycle duration (e.g. cycle_1d for daily candles), which overrides Parameters.cycle_duration. If Parameters specifies a different cycle (e.g. cycle_4d), the grid search ignores it. The run_backtest_inline() call must explicitly pass the same cycle duration as the grid search to reproduce results. Use CycleDuration.from_timebucket(parameters.candle_time_bucket).

     from tradeexecutor.strategy.cycle import CycleDuration
     
     result = run_backtest_inline(
         name=parameters.id,
         engine_version="0.5",
         decide_trades=decide_trades,
         create_indicators=indicators.create_indicators,
         cycle_duration=CycleDuration.from_timebucket(parameters.candle_time_bucket),
         client=client,
         universe=strategy_universe,
         parameters=parameters,
         max_workers=1,
         start_at=backtest_start,
         end_at=backtest_end,
     )
     
     state = result.state
     
     trade_count = len(list(state.portfolio.get_all_trades()))
     print(f"Backtesting completed, backtested strategy made {trade_count} trades")
     
     # Add state to the further charts
     chart_renderer = ChartBacktestRenderingSetup(
         registry=charts,
         strategy_input_indicators=indicator_data,
         state=state,
         backtest_start_at=backtest_start,
         backtest_end_at=backtest_end,
     )
     

   k. Backtest output cells: Copy from the reference backtest notebook (cells 27 onwards). These are heading + code cell pairs:

   Heading	Description
   # Performance metrics	compare_strategy_backtest_to_multiple_assets()
   # Equity curve	equity_curve_with_benchmark chart
   ## Equity curve with drawdown	equity_curve_with_drawdown chart
   # Asset weights	Section heading
   ## Volatiles only	volatile_weights_by_percent chart
   ## Volatiles and non-volatiles	volatile_and_non_volatile_percent chart
   ## Portfolio equity curve breakdown by asset	equity_curve_by_asset chart
   ## Portfolio equity curve breakdown by chain	equity_curve_by_chain chart
   ## Weight allocation statistics	weight_allocation_statistics chart
   # Rolling Sharpe	Rolling Sharpe ratio calculation
   # Positions at the end	positions_at_end chart
   # Strategy thinking	last_messages chart
   # Alpha model diagnostics data	alpha_model_diagnostics chart
   # Trading pair breakdown	trading_pair_breakdown_with_chain chart
   # Trading metrics	trading_metrics chart
   # Interest accrued	Section heading
   ## Lending pools	lending_pool_interest_accrued chart
   # Vault performance	Section heading
   ## Vault statistics	vault_statistics chart
   ## Vault position list	all_vault_positions_by_profit chart
   ## Vault individual position timeline	Vault-specific rendering

   Do not copy any optimiser-specific cells (perform_optimisation, results table, equity curves overlay, parameter analysis, decision tree, feature importance, heatmaps, cluster analysis, parallel coordinates, best candidate equity curve, best pick portfolio/trade/positions sections, or the best strategy chart rendering cells).

5. Write the output notebook as {NN+1}-rerun.ipynb in the same directory as the input notebook. The number prefix should be the next sequential number after the highest existing notebook number in the directory.

6. Verify the notebook structure:

   • Parameters class has fixed scalar values (no Categorical, Integer, or Real)
   • No from skopt.space import Categorical import
   • calculate_and_load_indicators_inline() is present at the end of the indicators cell
   • run_backtest_inline() is present in the strategy cell
   • ChartRegistry and ChartBacktestRenderingSetup are properly set up
   • No float() casts around parameter values that are now native Python types
   • No dynamic dispatch for parameters that are now fixed values
   • All chart rendering cells reference chart_renderer
   • Test run: poetry run jupyter execute {output-notebook}.ipynb --inplace --timeout=900

7. Verify results match the optimiser's best pick: After running the notebook, compare the backtest metrics (CAGR, Sharpe, max drawdown) with the optimiser's best result. The values should match exactly or near-exactly:

   • CAGR: Should match to within 1% absolute (e.g. 40.8% vs 40.8%).
   • Sharpe ratio: Should match to within 0.1 (e.g. 2.22 vs 2.22).
   • Max drawdown: Should match to within 1 percentage point (e.g. -6.00% vs -5.85%).
   • Trade count: May differ slightly but should be the same order of magnitude.

   If the results differ significantly (e.g. CAGR off by more than 10% relative), check these common pitfalls in order:

   1. Cycle duration mismatch (most common cause): The grid search overrides Parameters.cycle_duration with CycleDuration.from_timebucket(candle_time_bucket). For daily candles this means cycle_1d, even if Parameters says cycle_4d. Ensure run_backtest_inline() passes cycle_duration=CycleDuration.from_timebucket(parameters.candle_time_bucket). This was the root cause of a 41% vs 22% CAGR mismatch in the first application of this skill.
   2. decide_trades() simplified incorrectly: Did you accidentally change the strategy logic? Compare line by line with the original.
   3. Wrong parameter values: Are all parameters set to the correct best values from the optimiser?
   4. Indicator name mismatch: Is the indicator used for signal selection correct (e.g. "rolling_returns" vs "signal")?
   5. Weight function mismatch: Is the weight function correct (e.g. weight_by_1_slash_n vs weight_equal)?

Cell-by-cell mapping

Reference notebooks (in getting-started/scratchpad/vault-of-vaults/):

• Optimiser: 33-hyperliquid-only-grid-search-4d-rebalance-profit.ipynb
• Backtest: 30-waterfall-diversified-larger-universe.ipynb

What stays the same

These cells are copied verbatim from the optimiser notebook:

• Setup cell: Client.create_jupyter_client() + setup_charting_and_output()
• Chain config cell: Exchange/pair/vault configuration
• Trading universe cell: create_trading_universe() function
• Indicators cell: All indicator function definitions — but see "Restore inline indicator calculation" below
• Backtest time range cell: Start/end date calculation (may already use Parameters.backtest_start/end)

What changes

1. Title cell

• Optimiser: # Hyperliquid-only vault of vaults parameter search - optimise for profit
• Backtest: # Hyperliquid-only vault of vaults strategy

Remove "parameter search", "grid search", "optimise for ..." from the title. Below the title, add a preface section with:

1. A note referencing the source optimiser notebook by filename
2. A markdown table listing each parameter that was searchable (Categorical/Integer/Real) and its chosen best value

Example:

# Hyperliquid-only vault of vaults strategy

- Rerun of the best result from `33-hyperliquid-only-grid-search-4d-rebalance-profit.ipynb`

| Parameter | Value |
|-----------|-------|
| max_assets_in_portfolio | 20 |
| max_concentration | 0.10 |
| rolling_returns_bars | 60 |
| weighting_method | rolling_returns |
| weight_function | weight_equal |
| waterfall | True |
| volatility_window | 180 |

2. Parameters cell

Remove imports:

from skopt.space import Categorical  # Remove
from skopt.space import Integer      # Remove if present
from skopt.space import Real         # Remove if present

Replace Categorical([...]) with the single best value. The value must be the native Python type. Example:

# Optimiser (searchable)
max_assets_in_portfolio = Categorical([5, 10, 20, 35, 45])
max_concentration = Categorical([0.05, 0.10, 0.15, 0.20, 0.33])
rolling_returns_bars = Categorical([30, 60, 120, 240, 480])
weighting_method = Categorical(["rolling_returns", "rolling_sharpe", "rolling_sortino", "inverse_volatility"])
weight_function = Categorical(["weight_equal", "weight_1_slash_n"])
waterfall = Categorical([True, False])
volatility_window = Categorical([30, 60, 180, 240])

# Backtest (fixed, using best values from optimisation)
max_assets_in_portfolio = 20
max_concentration = 0.10
rolling_returns_bars = 60
weighting_method = "rolling_returns"
weight_function = "weight_equal"
waterfall = True
volatility_window = 180

Keep dispatch parameters (weighting_method, weight_function, waterfall, etc.) as fixed values in the Parameters class for traceability, even if decide_trades() is simplified to not reference them.

Other changes:

• Remove display_parameters(parameters) and its from tradeexecutor.strategy.parameters import display_parameters import at the end of the cell
• If use_managed_yield = False was set for the optimiser, ask the user whether to restore to True

3. Restore inline indicator calculation

The optimiser indicators cell ends without calculate_and_load_indicators_inline() because the optimiser calculates indicators for each parameter combination internally. The backtest needs this call restored.

Add at the end of the indicators cell (after display_indicators(indicators)):

# Calculate all indicators and store the result on disk
indicator_data = calculate_and_load_indicators_inline(
    strategy_universe=strategy_universe,
    create_indicators=indicators.create_indicators,
    parameters=parameters,
)

Ensure the import is at the top of the cell:

from tradeexecutor.strategy.pandas_trader.indicator import calculate_and_load_indicators_inline

This is safe because parameters are now fixed scalar values, not Categorical instances.

4. Add ChartRegistry and pre-backtest visualisations

The optimiser notebook has no ChartRegistry before the backtest. The backtest notebook needs one.

Add a charts cell (based on reference backtest cell 13) that:

1. Imports chart functions from tradeexecutor.strategy.chart.standard.*
2. Defines custom chart wrapper functions (e.g. trading_pair_breakdown_with_chain, all_vault_positions_by_profit)
3. Creates a ChartRegistry and registers all charts
4. Creates a pre-backtest ChartBacktestRenderingSetup with indicator_data (no state yet — state comes after run_backtest_inline)

Tip: If the optimiser notebook has a "Backtesting chart rendering for the best strategy" cell (typically near the end), reuse its chart function definitions — they are already adapted to this strategy. Move them to the pre-backtest position.

Then add pre-backtest visualisation cells (based on reference backtest cells 14-22):

• Available pairs
• Inclusion criteria checks
• Vault TVL and share price data
• Signal by chain

Important — indicator name mismatch: The reference backtest's signal chart cells use indicator_data.get_indicator_series("signal", pair=pair), referencing a unified signal indicator. Optimiser notebooks often do not define a signal indicator — they use individual indicators like "rolling_returns", "rolling_sharpe", etc. directly. When copying signal chart cells, replace "signal" with the actual indicator name matching the best weighting_method (e.g. "rolling_returns").

5. Simplify decide_trades() and add run_backtest_inline()

The optimiser's decide_trades() has patterns that should be simplified when parameter values are fixed.

a. Remove float() casts

# Optimiser (numpy.float64 workaround)
max_weight = float(parameters.max_concentration)

# Backtest (native Python float, no cast needed)
max_weight = parameters.max_concentration

b. Simplify dynamic signal indicator dispatch

The optimiser dispatches based on parameters.weighting_method:

weighting_method = parameters.weighting_method
if weighting_method == "rolling_returns" or weighting_method == "inverse_volatility":
    signal_indicator_name = "rolling_returns"
elif weighting_method == "rolling_sharpe":
    signal_indicator_name = "rolling_sharpe"
...
pair_signal = indicators.get_indicator_value(signal_indicator_name, pair=pair)

If the best weighting_method is "rolling_returns", simplify to a direct call:

pair_signal = indicators.get_indicator_value("rolling_returns", pair=pair)

Note: If the backtest reference uses a unified signal indicator that wraps the underlying metric, use that instead.

c. Simplify dynamic weight function dispatch

The optimiser has:

if weighting_method == "inverse_volatility":
    for pair_id, signal_obj in alpha_model.signals.items():
        if pair_id in pair_volatilities:
            signal_obj.signal = pair_volatilities[pair_id]
    alpha_model.assign_weights(method=weight_by_1_slash_signal)
else:
    weight_func_map = {
        "weight_equal": weight_equal,
        "weight_1_slash_n": weight_by_1_slash_n,
    }
    weight_func = weight_func_map[parameters.weight_function]
    alpha_model.assign_weights(method=weight_func)

If the best values are weighting_method="rolling_returns" and weight_function="weight_equal", simplify to:

alpha_model.assign_weights(method=weight_equal)

Remove the pair_volatilities dict, the weight_func_map lookup, and any unused weight function imports.

d. Simplify boolean/enum parameters

# Optimiser
waterfall=parameters.waterfall,

# Backtest (if best value is True)
waterfall=True,

e. Add run_backtest_inline() call

Critical — cycle duration mismatch: The grid search internally uses CycleDuration.from_timebucket(candle_time_bucket) to determine the cycle duration, which overrides Parameters.cycle_duration. For example, with TimeBucket.d1 candles, the grid search always runs with cycle_1d (daily rebalancing), even if Parameters specifies cycle_4d. The run_backtest_inline() call must explicitly pass the same cycle duration to reproduce results.

After decide_trades(), in the same cell, add:

from tradeexecutor.strategy.cycle import CycleDuration

result = run_backtest_inline(
    name=parameters.id,
    engine_version="0.5",
    decide_trades=decide_trades,
    create_indicators=indicators.create_indicators,
    cycle_duration=CycleDuration.from_timebucket(parameters.candle_time_bucket),
    client=client,
    universe=strategy_universe,
    parameters=parameters,
    max_workers=1,
    start_at=backtest_start,
    end_at=backtest_end,
)

state = result.state

trade_count = len(list(state.portfolio.get_all_trades()))
print(f"Backtesting completed, backtested strategy made {trade_count} trades")

# Add state to the further charts
chart_renderer = ChartBacktestRenderingSetup(
    registry=charts,
    strategy_input_indicators=indicator_data,
    state=state,
    backtest_start_at=backtest_start,
    backtest_end_at=backtest_end,
)

The chart_renderer is re-created here with the state parameter, overwriting the pre-backtest renderer.

6. Remove optimiser-specific cells

All of these cells from the optimiser are removed:

Optimiser cells	Description
# Optimiser (markdown + code)	perform_optimisation() call
# Results (markdown + code)	analyse_optimiser_result() + render_grid_search_result_table()
## Equity curves (markdown + code)	visualise_grid_search_equity_curves() overlay
# Parameter analysis (markdown)	Section heading
## Decision tree visualisation (markdown + code)	analyse_decision_tree()
## Feature importance analysis (markdown + code)	analyse_feature_importance()
## Heatmaps for parameter pairs (markdown + code)	analyse_parameter_pair_heatmaps()
## Cluster analysis (markdown + code)	KMeans + PCA (if present)
## Parallel coordinates plot (markdown + code)	px.parallel_coordinates (if present)
# The best candidate equity curve (markdown + code)	visualise_single_grid_search_result_benchmark()
# Portfolio performance (best pick) (markdown + code)	compare_strategy_backtest_to_multiple_assets() on best pick
# Trade summary (best pick) (markdown + code)	best_pick.summary
# Trading pair performance breakdown (markdown + code)	analyse_multipair() on best pick
# Best positions (markdown + code)	Sorted positions from best pick
# Rolling sharpe (markdown + code)	Rolling Sharpe on best pick
# Backtesting chart rendering for the best strategy (markdown + code)	ChartRegistry for best pick (reuse chart definitions, see step 4)
All subsequent best-strategy chart cells	Available pairs, trading pair breakdown, vault stats, rolling Sharpe, asset weights

7. Add backtest output cells

Replace the removed optimiser cells with standard backtest output cells. Copy from the reference backtest notebook (cells 27-65):

#	Heading	Chart/function used
1	# Performance metrics	performance_metrics chart + compare_strategy_backtest_to_multiple_assets()
2	# Equity curve	equity_curve_with_benchmark chart
3	## Equity curve with drawdown	equity_curve_with_drawdown chart
4	# Asset weights	Section heading only
5	## Volatiles only	volatile_weights_by_percent chart
6	## Volatiles and non-volatiles	volatile_and_non_volatile_percent chart
7	## Portfolio equity curve breakdown by asset	equity_curve_by_asset chart
8	## Portfolio equity curve breakdown by chain	equity_curve_by_chain chart
9	## Weight allocation statistics	weight_allocation_statistics chart
10	# Rolling Sharpe	calculate_rolling_sharpe() with plotly
11	# Positions at the end	positions_at_end chart
12	# Strategy thinking	last_messages chart
13	# Alpha model diagnostics data	alpha_model_diagnostics chart
14	# Trading pair breakdown	trading_pair_breakdown_with_chain chart
15	# Trading metrics	trading_metrics chart
16	# Interest accrued	Section heading
17	## Lending pools	lending_pool_interest_accrued chart
18	# Vault performance	Section heading
19	## Vault statistics	vault_statistics chart
20	## Vault position list	all_vault_positions_by_profit chart
21	## Vault individual position timeline	vault_position_timeline + pair-specific rendering

Naming convention

Output file: {NN+1}-rerun.ipynb

• NN+1 is the next sequential number after the highest numbered notebook in the same directory
• Example: 33-hyperliquid-only-grid-search-4d-rebalance-profit.ipynb -> 34-rerun.ipynb