Menú
CLI Coding Agents.
Instalar con Codex o Claude Copia este prompt, pégalo en Codex, Claude u otro asistente, y deja que revise la página de la skill y la instale por ti.
Basado en la clasificación ocupacional SOC
Map of the Tailscale network (tailnet) and how to reach, operate, and deploy to remote machines over it via SSH. Use for any cross-machine task — remote install, deploy, restart, log-check, or file transfer.
Operate nano-core coding delegation. Use for /coder or /coding execution, /coder-plan or /coder_plan planning, natural-language coding approval prompts, delegated runs, run IDs, progress, cancellation, and final-result handling; not for direct coding or automatic delegation.
Diagnose nano-core runtime failures. Use for provider/model errors, Pi launch or skill-discovery failures, Telegram/WhatsApp routing, singleton locks, service state, IPC, SQLite state, scheduler behavior, or per-group logs; not for installation or feature work.
Install or onboard nano-core on a host. Use for first-time installation, prerequisites, runtime selection, provider/channel configuration, daemon setup, upgrades, or doctor checks; not for diagnosing an already-running incident.
Understand and operate nano-core itself. Use for questions about nano-core architecture, behavior, configuration, capabilities, skills, installation, troubleshooting, Telegram administration, or coding delegation; route focused work to the matching nano-core skill.
Configure and operate nano-core through Telegram. Use for bot enablement, main/admin chat claims, trigger routing, command authorization, delivery modes, media intake, polling conflicts, and Telegram-first operation; not for WhatsApp-only or general runtime incidents.
| name | cli-coding-agents |
| description | CLI Coding Agents. |
Launch coding agents across Claude, Droid, and OpenCode CLI platforms with unified profile management and flexible configuration.
List all profiles:
ai-claude-start list
ai-droid-start list
ai-opencode-start list
Setup wizard:
ai-claude-start setup
ai-droid-start setup
ai-opencode-start setup
Set default profile:
ai-claude-start default <profile-name>
ai-droid-start default <profile-name>
ai-opencode-start default <profile-name>
Delete profile:
ai-claude-start delete <profile-name>
ai-droid-start delete <profile-name>
ai-opencode-start delete <profile-name>
System health check:
ai-claude-start doctor
ai-droid-start doctor
ai-opencode-start doctor
Basic launch:
claude-start # Uses default profile (ZAI)
claude-start ZAI # Use specific profile
claude-start MinimaxM2.1
With flags (passed to Claude):
claude-start --continue # Continue last session
claude-start ZAI --model claude-sonnet-4-5 # Override model
claude-start --dangerously-skip-permissions --continue
Cross-command invocation:
ai-claude-start ZAI # Uses Claude binary
ai-droid-start --claude ZAI # Force Claude from droid-start
ai-opencode-start --claude ZAI # Force Claude from opencode-start
Basic launch:
droid-start # Uses default profile (ZAI)
droid-start ZAI # Use specific profile
droid-start deepseek-v3.2
With flags (passed to Droid):
droid-start --continue
droid-start GLM-4.7 --model claude-sonnet-4-5 # Override model
Cross-command invocation:
ai-droid-start ZAI # Uses Droid binary
ai-claude-start --droid ZAI # Force Droid from claude-start
ai-opencode-start --droid ZAI # Force Droid from opencode-start
Basic launch:
opencode-start # Uses default profile (ZAI)
opencode-start ZAI # Use specific profile
opencode-start code-fast-1
With flags (passed to OpenCode):
opencode-start --continue # Continue last session
opencode-start ZAI --model anthropic/claude-sonnet-4-5 # Override model
opencode-start --run "explain this file" # Non-interactive mode
Cross-command invocation:
ai-opencode-start ZAI # Uses OpenCode binary
ai-claude-start --opencode ZAI # Force OpenCode from claude-start
ai-droid-start --opencode ZAI # Force OpenCode from droid-start
claude-start ZAI # GLM-4.7 via Z.AI
claude-start MinimaxM2.1 # MiniMax-M2.1 via MiniMax
claude-start deepseek-v3.2 # deepseek/deepseek-v3.2 via OpenRouter
claude-start code-fast-1 # x-ai/grok-code-fast-1 via OpenRouter
claude-start oss-120B # openai/gpt-oss-20b via OpenRouter
claude-start "kimi K2" # Kimi Coding via Kimi
claude-start M2.1 # minimax/minimax-m2.1 via MiniMax
droid-start ZAI # GLM-4.7 via Z.AI
droid-start MinimaxM2.1 # MiniMax-M2.1 via MiniMax
droid-start deepseek-v3.2 # deepseek/deepseek-v3.2 via OpenRouter
droid-start code-fast-1 # x-ai/grok-code-fast-1 via OpenRouter
droid-start oss-120B # openai/gpt-oss-20b via OpenRouter
droid-start "kimi K2" # Kimi Coding via Kimi
droid-start M2.1 # minimax/minimax-m2.1 via MiniMax
opencode-start ZAI # GLM-4.7 via Z.AI
opencode-start MinimaxM2.1 # MiniMax-M2.1 via MiniMax
opencode-start deepseek-v3.2 # deepseek/deepseek-v3.2 via OpenRouter
opencode-start code-fast-1 # x-ai/grok-code-fast-1 via OpenRouter
opencode-start oss-120B # openai/gpt-oss-20b via OpenRouter
opencode-start "kimi K2" # Kimi Coding via Kimi
opencode-start M2.1 # minimax/minimax-m2.1 via MiniMax
Custom Claude command:
CLAUDE_CMD="/path/to/custom/claude" claude-start ZAI
Custom Droid command:
DROID_CMD="/path/to/custom/droid" droid-start ZAI
Custom OpenCode command:
OPENCODE_CMD="/path/to/custom/opencode" opencode-start ZAI
Test environment injection (doesn't actually launch CLI):
claude-start ZAI --cmd "node -e \"console.log(process.env.ANTHROPIC_AUTH_TOKEN)\""
droid-start ZAI --cmd "echo Testing with $ANTHROPIC_AUTH_TOKEN"
opencode-start ZAI --cmd "node -e \"console.log(process.env.ANTHROPIC_API_KEY)\""
Use default profile (interactive if multiple):
claude-start
Use specific profile:
claude-start ZAI
Interactive selection (if multiple profiles):
claude-start
# Prompts: "Select a profile to use:"
# ZAI (default)
# MinimaxM2.1
# deepseek-v3.2
# ...
For detailed information, see: