alibabacloud-ecs-disaster-recovery-snapshot

name

alibabacloud-ecs-disaster-recovery-snapshot

description

Alibaba Cloud ECS snapshot-based cross-AZ disaster recovery skill. Two scenarios: Scenario A (Full Instance Recovery): Recover ECS instance to a different AZ via snapshots — multi-disk uses snapshot consistency group for crash consistency, creates full custom image (system + data disks), launches new instance in target AZ; single-disk uses individual snapshot. Scenario B (Disk-Level Recovery): Snapshot specific disks from source instance, create new disks from snapshots, and attach them to an existing target instance. Triggers: cross-AZ disaster recovery, cross-zone backup, ECS snapshot recovery, snapshot backup, DR recovery, create instance from snapshot in another AZ, attach disk snapshot to another instance, create instance replica via snapshot. 可用区灾备恢复、跨可用区备份、ECS 快照恢复、快照备份、灾备恢复、 在另一个可用区从快照创建实例、把盘快照挂载到其他实例、用快照在另一个可用区创建实例副本、 恢复这台机器到另一个可用区、跨实例磁盘备份。 Note: This is "backup" not "migration" — the original instance remains untouched.

ECS Snapshot-Based Disaster Recovery Backup

This skill provides snapshot-based disaster recovery backup for ECS instances. The original instance and all its resources remain untouched — this is a backup operation, not a migration. It supports two scenarios:

• Scenario A — Full Instance Backup: Backs up an entire ECS instance to a different availability zone. Multi-disk (system + ≥1 data disk): uses snapshot consistency group (CreateSnapshotGroup) for cross-disk consistency, then creates a full image (system + data disks) — run-instances directly from the image, data disks auto-restored. Single-disk (system only): uses individual snapshot (create-snapshot) + system-disk-only image. Use when: AZ failure, datacenter backup, full instance cloning.
• Scenario B — Disk-Level Backup: Takes a snapshot of specific disk(s) from a source instance, creates new disk(s) from the snapshot, and attaches them to an existing target instance. Use when: back up specific data disk to another instance, cross-instance disk backup, or attach source disk data to an existing DR instance.

Scenario Detection

At the start of the workflow, determine which scenario applies based on the user's intent:

User Intent	Scenario
"back up this instance to another AZ" / "create a DR instance"	A
"snapshot a disk and attach to another instance" / "mount disk to target instance"	B
Ambiguous — ask the user to clarify	Ask

Once the scenario is determined, follow the corresponding workflow below.

Prerequisites

Pre-check: Aliyun CLI >= 3.3.3 required

1. Run aliyun version to check if CLI is installed and its version.
2. If CLI is not installed (command not found): inform the user and ask whether to install it. Only after user confirmation, download the installer with curl -fsSL --connect-timeout 10 --max-time 60 https://aliyuncli.alicdn.com/setup.sh -o /tmp/aliyun_cli_setup.sh, then run bash /tmp/aliyun_cli_setup.sh to execute the downloaded script.
3. If CLI is installed but version < 3.3.3: inform the user of the current version and the minimum requirement, then ask whether to upgrade. Only after user confirmation, run the upgrade command.
4. If CLI is installed and version >= 3.3.3: proceed directly, no action needed.

IMPORTANT: Do NOT upgrade Aliyun CLI without explicit user confirmation. Only prompt for upgrade when the version check fails.

Pre-check: Aliyun CLI plugin update required [MUST] run aliyun configure set --auto-plugin-install true to enable automatic plugin installation. [MUST] run aliyun plugin update to ensure that any existing plugins on your local machine are always up-to-date.

Pre-check: Alibaba Cloud Credentials Required

Security Rules:

• NEVER read, echo, or print AK/SK values (e.g., echo $ALIBABA_CLOUD_ACCESS_KEY_ID is FORBIDDEN)
• NEVER ask the user to input AK/SK directly in the conversation or command line
• NEVER use aliyun configure set with literal credential values
• NEVER export or set AK/SK as environment variables in commands (e.g. export ALIBABA_CLOUD_ACCESS_KEY_ID=... is FORBIDDEN). Always use aliyun CLI directly — it uses local credentials automatically.
• ONLY use aliyun configure list to check credential status

aliyun configure list

Check the output for a valid profile (AK, STS, or OAuth identity).

If no valid profile exists, STOP here.

1. Obtain credentials from Alibaba Cloud Console
2. Configure credentials outside of this session (via aliyun configure in terminal or environment variables in shell profile)
3. Return and re-run after aliyun configure list shows a valid profile

CLI Command Standards

[MUST] All CLI commands MUST follow these standards to avoid parameter errors.

Rule	Correct	Incorrect
Command name	describe-instances (kebab-case)	DescribeInstances (PascalCase)
User agent	Always include --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot/{session-id}	Missing user-agent or session-id
Region parameter	Use --biz-region-id for commands that support it; use --endpoint only for create-snapshot and attach-disk	--region-id or --RegionId
Endpoint	Add --endpoint ecs.<region>.aliyuncs.com when CLI default region differs	Omitting endpoint
List parameters	--disk-id val1 val2 (space-separated)	--disk-id.1 val1 --disk-id.2 val2
VSwitch parameter	--vswitch-id	--v-switch-id

[MUST] CLI User-Agent — Every aliyun CLI command that calls a cloud API must include: --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot/{session-id} (See Observability section below for session-id generation rules)

RAM Policy

See references/ram-policies.md for the full list of required RAM permissions.

[MUST] Permission Failure Handling: When any command or API call fails due to permission errors at any point during execution, follow this process:

1. Read references/ram-policies.md to get the full list of permissions required by this SKILL
2. Use ram-permission-diagnose skill to guide the user through requesting the necessary permissions
3. Pause and wait until the user confirms that the required permissions have been granted

Observability (MUST follow for every aliyun command)

Upon loading this skill, generate a random session ID (32-char lowercase hex string) once for the entire session. Use it as {session-id} below.

Rule: Every aliyun CLI command that calls a cloud API MUST include the --user-agent flag. Local utility commands (e.g. configure, plugin, version) do not support this flag and should be excluded.

--user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot/{session-id}

Example (assuming session-id is a1b2c3d4e5f6a7b8c9d0e1f2a3b4c5d6):

aliyun ecs describe-instances --biz-region-id cn-hangzhou --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot/a1b2c3d4e5f6a7b8c9d0e1f2a3b4c5d6

Do not skip, alter the format, or omit --user-agent on any aliyun API command invocation.

Parameter Confirmation

IMPORTANT: Parameter Confirmation — Before executing any command or API call, ALL user-customizable parameters (e.g., RegionId, instance names, instance IDs, IP addresses, etc.) MUST be confirmed with the user. Do NOT assume or use default values without explicit user approval.

User Interaction Pattern

[MUST] Use interactive choice prompts for all user decisions. Use AskUserQuestion tool to present 2–4 concrete options with short descriptions. Put recommended option first with (Recommended) suffix. Never just "STOP and ask" — always provide clickable options so the user can decide with a single click.

Scenario A — Full Instance Backup

Parameter Name	Required/Optional	Description	Default Value
InstanceId	Required	Source ECS instance ID	N/A
RegionId	Required	Region where the instance is located	Auto-detected from instance
TargetZoneId	Required	Target availability zone	N/A
InstanceName	Optional	Name for the new instance	recovery-<source-instance-name>

Scenario B — Disk-Level Backup

Parameter Name	Required/Optional	Description	Default Value
SourceInstanceId	Required	Source ECS instance ID (disk owner)	N/A
SourceDiskIds	Required	Specific disk ID(s) to snapshot	All data disks (ask user)
TargetInstanceId	Required	Target ECS instance ID to attach disks to	N/A
RegionId	Required	Region where instances are located	Auto-detected from instance
DiskCategory	Optional	Disk category for new disk(s)	Same as source disk

Execution Steps — Scenario A: Full Instance Backup

Step 1: Gather Information

Confirm the following inputs with the user (proactively ask if not provided):

• Source instance ID (required)
• Target availability zone (required, e.g. cn-beijing-l)
• Instance name (optional, default: recovery-<source-instance-name>)

The source instance's RegionId can be auto-detected from instance details — no need to ask the user.

Step 2: Query Source Instance Details

Make two parallel API calls to gather all information:

# Query instance details (spec, security group, VPC, VSwitch)
aliyun ecs describe-instances \
  --biz-region-id <region> \
  --endpoint ecs.<region>.aliyuncs.com \
  --instance-ids '["<instance-id>"]' \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

# Query disk information
aliyun ecs describe-disks \
  --biz-region-id <region> \
  --endpoint ecs.<region>.aliyuncs.com \
  --instance-id <instance-id> \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

Extract and record from the results:

• RegionId, ZoneId (current availability zone)
• InstanceName (source instance name, used for default DR instance naming)
• InstanceType (instance spec)
• SecurityGroupId
• VpcId, VSwitchId
• InstanceChargeType — instance billing mode (PrePaid/PostPaid), must be replicated on the new instance
• InternetChargeType — network billing mode (PayByTraffic/PayByBandwidth), must be replicated
• InternetMaxBandwidthOut — outbound bandwidth cap (Mbps), must be replicated
• PublicIpAddress — whether the source has a public IP assigned. The DR instance MUST replicate this exactly:
  • If source has public IP → set InternetMaxBandwidthOut to the same value as source (must be > 0)
  • If source has NO public IP → MUST set InternetMaxBandwidthOut=0 and MUST NOT assign any public IP to the new instance. This is a hard constraint — never enable public IP on the DR instance if the source does not have one.
• All disks' DiskId, device path (e.g. /dev/xvda, /dev/xvdb), Type (system/data), Category, Size, and PerformanceLevel (e.g. PL0, PL1 — only applicable to cloud_essd family). This information is critical for Step 3 (snapshot creation) and Step 6 (instance creation).

Step 3: Create Snapshots

Determine the snapshot strategy based on the disk count from Step 2:

Disk Configuration	Strategy
System disk + ≥1 data disk (multi-disk)	Use snapshot consistency group (create-snapshot-group)
System disk only (single-disk)	Use individual snapshot (create-snapshot)

Why snapshot consistency group for multi-disk? Snapshot consistency groups guarantee cross-disk crash consistency — all disk snapshots are taken at the same point-in-time. This is critical for applications that span multiple disks (e.g. database with separate data/log disks).

Path A: Multi-Disk — Snapshot Consistency Group

aliyun ecs create-snapshot-group \
  --biz-region-id <region> \
  --endpoint ecs.<region>.aliyuncs.com \
  --instance-id <instance-id> \
  --name "SnapGroup_<instance-id>_<date>" \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

Poll with describe-snapshot-groups until Status: accomplished:

aliyun ecs describe-snapshot-groups \
  --biz-region-id <region> \
  --endpoint ecs.<region>.aliyuncs.com \
  --snapshot-group-id <snapshot-group-id> \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

Extract: system snapshot ID (SourceDiskType: system) + data snapshot IDs (SourceDiskType: data).

Important: Snapshot consistency groups support Instant Access — snapshots can be used for create-image as soon as group status is accomplished.

Path B: Single-Disk — Individual Snapshot

aliyun ecs create-snapshot \
  --endpoint ecs.<region>.aliyuncs.com \
  --disk-id <system-disk-id> \
  --snapshot-name "Snap_<instance-id>_sys_<date>" \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

Poll with describe-snapshots until Available: true AND Progress: 100% AND Status: accomplished.

Failure Handling: See Error Handling Guide for retry strategy, timeout handling, and user interaction patterns.

Important: The system snapshot must be fully ready before proceeding to Step 4 (create-image). Report progress to the user at each poll check.

Step 4: Create Image

Multi-Disk — Full Image (System + Data Disks)

Create an image containing ALL disk snapshots from the consistency group (system + every data disk).

aliyun ecs create-image \
  --biz-region-id <region> \
  --endpoint ecs.<region>.aliyuncs.com \
  --image-name "Create_from_<instance-id>_<date>" \
  --disk-device-mapping DiskType=system SnapshotId=<system-snapshot-id> Size=<system-disk-size> \
  --disk-device-mapping DiskType=data SnapshotId=<data-snapshot-id-1> Size=<data-disk-1-size> \
  --disk-device-mapping DiskType=data SnapshotId=<data-snapshot-id-2> Size=<data-disk-2-size> \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

Add one --disk-device-mapping DiskType=data SnapshotId=... Size=... for each data disk. Snapshot IDs come from the consistency group (Step 3 Path A).

Single-Disk — System-Disk-Only Image

aliyun ecs create-image \
  --biz-region-id <region> \
  --endpoint ecs.<region>.aliyuncs.com \
  --image-name "Create_from_<instance-id>_<date>" \
  --disk-device-mapping DiskType=system SnapshotId=<system-snapshot-id> Size=<system-disk-size> \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

Image naming convention: Create_from_<instance-id>. Append date suffix _YYYYMMDD if name conflicts.

After creation, confirm Status is Available using describe-images:

aliyun ecs describe-images \
  --biz-region-id <region> \
  --endpoint ecs.<region>.aliyuncs.com \
  --image-id <image-id> \
  --status "Creating,Available,UnAvailable" \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

Poll every 60 seconds until Status is Available. Report progress to the user at each check.

Failure Handling: See Error Handling Guide for retry strategy and timeout handling.

Step 5: Prepare Target Availability Zone Resources

Query VSwitch and resource availability in the target AZ:

aliyun ecs describe-vswitches \
  --biz-region-id <region> --endpoint ecs.<region>.aliyuncs.com \
  --vpc-id <vpc-id> --zone-id <target-az> \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

aliyun ecs describe-available-resource \
  --biz-region-id <region> --endpoint ecs.<region>.aliyuncs.com \
  --zone-id <target-az> --destination-resource InstanceType \
  --instance-type <instance-type> --instance-charge-type PostPaid \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

aliyun ecs describe-available-resource \
  --biz-region-id <region> --endpoint ecs.<region>.aliyuncs.com \
  --zone-id <target-az> --destination-resource SystemDisk \
  --instance-type <instance-type> --instance-charge-type PostPaid \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

Decisions (always use AskUserQuestion):

• No VSwitch in target AZ → ask user: Create VSwitch (Recommended) / Choose another AZ
• Instance type no stock → present alternatives (similar vCPU/memory) or alternative AZs
• Disk category unsupported → present available alternatives as clickable options

Step 6: Create Disaster Recovery Instance

The image contains all disk snapshots (multi-disk) or system disk snapshot only (single-disk). While run-instances auto-restores data disk content from the image, it does NOT inherit the source data disk's category or performance level — these MUST be overridden via --data-disk Device=<path> ... parameters.

Critical: The DR instance MUST inherit the source instance's properties:

• VPC + Security Group: Same VpcId (find/create VSwitch in target AZ) and same SecurityGroupId.
• Public IP (CRITICAL): The DR instance's public IP status MUST exactly match the source:
  • Source has public IP → set InternetMaxBandwidthOut to the same value as source (> 0)
  • Source has NO public IP → MUST set InternetMaxBandwidthOut=0. NEVER assign a public IP or set bandwidth > 0 when the source instance has no public IP. Violating this rule will expose the DR instance to the internet unexpectedly.
• System Disk: Category, Size, PerformanceLevel must match source exactly.

  CRITICAL: --system-disk-performance-level is mandatory for cloud_essd disks. If omitted, the API defaults to PL1.

• Data Disk(s) (CRITICAL): Each data disk MUST be overridden via --data-disk Device=<device-path> Category=<category> Size=<size> PerformanceLevel=<PL> matching the source. The Device= path comes from Step 2 (e.g. /dev/xvdb). Without this, the system defaults to cloud_auto and loses the original performance spec.
• Billing: InstanceChargeType (PrePaid/PostPaid) and InternetChargeType (PayByTraffic/PayByBandwidth) must match source exactly.

Disk category decision — always ask the user via AskUserQuestion: Note the system disk category compatibility in the target AZ. If the original disk category is unsupported, use AskUserQuestion to present available alternatives as clickable options. Do NOT silently substitute a disk category.

Instance Naming (MUST follow): The default instance name format is recovery-<source-instance-name>, where <source-instance-name> is the InstanceName field extracted in Step 2 from describe-instances. For example, if the source instance name is prod-web-server, the DR instance name MUST be recovery-prod-web-server. Only override this default if the user explicitly provides a custom name. Do NOT use instance ID, generic prefixes like dr-backup-, or any other naming pattern.

aliyun ecs run-instances \
  --biz-region-id <region> \
  --endpoint ecs.<region>.aliyuncs.com \
  --zone-id <target-az> \
  --image-id <image-id> \
  --instance-type <instance-type> \
  --security-group-id <sg-id> \
  --vswitch-id <target-vswitch-id> \
  --system-disk-category <system-disk-category> \
  --system-disk-size <system-disk-size> \
  --system-disk-performance-level <system-disk-performance-level> \
  --data-disk Device=<device-path> Category=<data-disk-category> Size=<data-disk-size> PerformanceLevel=<data-disk-PL> \
  --instance-name "recovery-<source-instance-name>" \
  --instance-charge-type <instance-charge-type> \
  --internet-charge-type <internet-charge-type> \
  --internet-max-bandwidth-out <internet-max-bandwidth-out> \
  --amount 1 \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

Note: --data-disk with Device= overrides the parameters of that disk in the image — it does NOT create new disks.

• Device=/dev/xvdb — overrides the image's data disk parameters (correct). Multiple data disks: use multiple --data-disk flags.
• SnapshotId=s-xxx — creates an additional disk (incorrect, never use). Do NOT use --data-disk-N-* form; it does not support PL.
• For single-disk (system only), omit --data-disk.

After creation, wait ~15 seconds then confirm Running via describe-instances. Verify each data disk's Category and PerformanceLevel match source via describe-disks.

Failure Handling: See Error Handling Guide for error diagnosis table, retry strategy, and status abnormality handling.

Execution Steps — Scenario B: Disk-Level Backup

Step 1: Gather Information

Confirm the following inputs with the user (proactively ask if not provided):

• Source instance ID (required) — the instance whose disk(s) will be snapshotted
• Target disk(s) (required) — which disk(s) to snapshot (system disk, data disk, or specific disk IDs). If the user says "data disk", query disks and confirm which data disk(s) to include.
• Target instance ID (required) — the existing instance to attach the recovered disk(s) to

The RegionId can be auto-detected from the source instance details.

Step 2: Query Source Disk and Target Instance Details

aliyun ecs describe-disks \
  --biz-region-id <region> --endpoint ecs.<region>.aliyuncs.com \
  --instance-id <source-instance-id> \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

aliyun ecs describe-instances \
  --biz-region-id <region> --endpoint ecs.<region>.aliyuncs.com \
  --instance-ids '["<target-instance-id>"]' \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

Extract: Source disk(s) DiskId/Type/Category/Size; Target instance ZoneId.

Step 3: Create Snapshots

For each disk, create an individual snapshot (poll until Status: accomplished + Progress: 100%):

aliyun ecs create-snapshot \
  --endpoint ecs.<region>.aliyuncs.com \
  --disk-id <disk-id> \
  --snapshot-name "Snap_<instance-id>_<disk-type>_<date>" \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

Failure Handling: See Error Handling Guide.

Step 4: Create Disk(s) from Snapshot(s)

Create new disk(s) in the target instance's AZ. Use AskUserQuestion if disk category is unavailable.

CRITICAL: For cloud_essd disks, always pass --performance-level matching the source disk. If omitted, the API defaults to PL1, which changes the disk's performance specification.

aliyun ecs create-disk \
  --biz-region-id <region> --endpoint ecs.<region>.aliyuncs.com \
  --zone-id <target-instance-zone> --snapshot-id <snapshot-id> \
  --disk-category <disk-category> --size <disk-size> \
  --performance-level <performance-level> \
  --disk-name "data-from-source" \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

Step 5: Attach Disk(s) and Verify

aliyun ecs attach-disk \
  --endpoint ecs.<region>.aliyuncs.com \
  --disk-id <new-disk-id> --instance-id <target-instance-id> \
  --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-disaster-recovery-snapshot

Failure Handling: See Error Handling Guide.

Verify disks show Status: In_use via describe-disks. Remind user that the new disk needs to be mounted on the target instance, but NEVER output system commands (e.g. lsblk, mount, fdisk, mkfs) — you don't know the user's OS or usage scenario.

Safety Rules

• Never delete instances, disks, or snapshots without explicit user confirmation.
• Do not stop the source instance — snapshot operations support Running instances.
• Never make resource-changing decisions on behalf of the user. Always use AskUserQuestion to present clickable options before proceeding.

Key Constraints and Pitfalls

1. Multi-disk MUST use snapshot consistency group: When the instance has system disk + ≥1 data disk, always use create-snapshot-group to ensure cross-disk crash consistency. Then create a full image with all disk snapshots (DiskType=system + DiskType=data entries). The image provides snapshot data, but --data-disk Device=<path> Category=... Size=... PerformanceLevel=... MUST be passed in run-instances to override each data disk's parameters — without it, data disks default to cloud_auto.
2. Single-disk uses individual snapshot: When the instance has only a system disk, use create-snapshot + system-disk-only image.
3. create-image for multi-disk includes all disks: Use --disk-device-mapping with DiskType=system for the system snapshot AND one DiskType=data entry per data disk snapshot. All snapshot IDs come from the consistency group.
4. Disk category availability varies by zone: cloud_essd_entry is not supported in all zones. Verify with describe-available-resource before creation; ask the user which alternative to use.
5. create-snapshot and attach-disk do NOT support --biz-region-id: Use --endpoint ecs.<region>.aliyuncs.com only.
6. Snapshot must be ready before create-image: For consistency groups, poll until group Status: accomplished. For individual snapshots, poll until Available: true AND Progress: 100%.
7. Scenario B — create-disk requires snapshot Progress 100%: Unlike create-image which works with InstantAccess snapshots, create-disk requires the snapshot to be fully completed.
8. Scenario B — Disk must be in the same AZ as target instance: A disk can only be attached to an instance in the same availability zone.
9. DR instance must inherit source instance properties: VPC (same VpcId), security group (same SecurityGroupId), public IP status (has/not-has), and disk specs (Category/Size/PerformanceLevel) must all match the source instance exactly. Do NOT use different VPC, security group, or disk specifications. CRITICAL: If the source instance has NO public IP, the DR instance MUST set — never enable public IP on the DR instance when the source does not have one.

Output Format

Upon completion, present a comparison table showing Source Instance vs DR Instance (for Scenario A) or an operation summary table (for Scenario B). Include: Instance IDs, names, zones, types, IP addresses, disk details, image info, and status. For Scenario B, also show target instance's full disk layout table.

Reference Links

Document	Description
CLI Installation Guide	Aliyun CLI installation and configuration instructions
Error Handling Guide	Retry strategies, timeout handling, error diagnosis
RAM Policies	Required RAM permissions for this skill
Related Commands	Full CLI command reference table
ECS API Reference	ECS API documentation
Aliyun CLI Documentation	CLI usage guide