incremental-build

name	incremental-build
description	Guide for optimizing MSBuild incremental builds. USE FOR: builds slower than expected on subsequent runs, 'nothing changed but it rebuilds anyway', diagnosing why targets re-execute unnecessarily, fixing broken no-op builds. Covers 8 common causes: missing Inputs/Outputs on custom targets, volatile properties in output paths (timestamps/GUIDs), file writes outside tracked Outputs, missing FileWrites registration, glob changes, Visual Studio Fast Up-to-Date Check (FUTDC) issues. Key diagnostic: look for 'Building target completely' vs 'Skipping target' in binlog. DO NOT USE FOR: first-time build slowness (use build-perf-baseline), parallelism issues (use build-parallelism), evaluation-phase slowness (use eval-performance), non-MSBuild build systems.
license	MIT

How MSBuild Incremental Build Works

MSBuild's incremental build mechanism allows targets to be skipped when their outputs are already up to date, dramatically reducing build times on subsequent runs.

• Targets with Inputs and Outputs attributes: MSBuild compares the timestamps of all files listed in Inputs against all files listed in Outputs. If every output file is newer than every input file, the target is skipped entirely.
• Without Inputs/Outputs: The target runs every time the build is invoked. This is the default behavior and the most common cause of slow incremental builds.
• Incremental attribute on targets: Targets can explicitly opt in or out of incremental behavior. Setting Incremental="false" forces the target to always run, even if Inputs and Outputs are specified.
• Timestamp-based comparison: MSBuild uses file system timestamps (last write time) to determine staleness. It does not use content hashes. This means touching a file (updating its timestamp without changing content) will trigger a rebuild.

<!-- This target is incremental: skipped if Output is newer than all Inputs -->
<Target Name="Transform"
        Inputs="@(TransformFiles)"
        Outputs="@(TransformFiles->'$(OutputPath)%(Filename).out')">
  <!-- work here -->
</Target>

<!-- This target always runs because it has no Inputs/Outputs -->
<Target Name="PrintMessage">
  <Message Text="This runs every build" />
</Target>

Why Incremental Builds Break (Top Causes)

1. Missing Inputs/Outputs on custom targets — Without both attributes, the target always runs. This is the single most common cause of unnecessary rebuilds.

2. Volatile properties in Outputs path — If the output path includes something that changes between builds (e.g., a timestamp, build number, or random GUID), MSBuild will never find the previous output and will always rebuild.

3. File writes outside of tracked Outputs — If a target writes files that aren't listed in its Outputs, MSBuild doesn't know about them. The target may be skipped (because its declared outputs are up to date), but downstream targets may still be triggered.

4. Missing FileWrites registration — Files created during the build but not registered in the FileWrites item group won't be cleaned by dotnet clean. Over time, stale files can confuse incremental checks.

5. Glob changes — When you add or remove source files, the item set (e.g., @(Compile)) changes. Since these items feed into Inputs, the set of inputs changes and triggers a rebuild. This is expected behavior but can be surprising.

6. Property changes — Properties that feed into Inputs or Outputs paths (e.g., $(Configuration), $(TargetFramework)) will cause rebuilds when changed. Switching between Debug and Release is a full rebuild by design.

7. NuGet package updates — Changing a package version updates project.assets.json and potentially many resolved assembly paths. This changes the inputs to ResolveAssemblyReferences and CoreCompile, triggering a rebuild.

8. Build server VBCSCompiler cache invalidation — The Roslyn compiler server (VBCSCompiler) caches compilation state. If the server is recycled (timeout, crash, or manual kill), the next build may be slower even though MSBuild's incremental checks pass, because the compiler must repopulate its in-memory caches.

Diagnosing "Why Did This Rebuild?"

Use binary logs (binlogs) to understand exactly why targets ran instead of being skipped.

Step-by-step using binlog

1. Build twice with binlogs to capture the incremental build behavior:

   dotnet build /bl:first.binlog
   dotnet build /bl:second.binlog
   

   The first build establishes the baseline. The second build is the one you want to be incremental. Analyze second.binlog.

Primary: binlog MCP (preferred)

Use the binlog MCP server (Microsoft.AITools.BinlogMcp, exposed under the binlog MCP namespace) to analyze the second binlog:

1. Use the overview tool to check overall build status and duration
2. Use the search tool to find targets that executed vs were skipped — search for "Building target completely", "Building target incrementally", "Skipping target"
3. Use the search tool to find "is newer than output" messages that reveal which input file triggered a rebuild
4. Use target-related tools (target_reasons, project_targets) to inspect why specific targets ran
5. Use the expensive_targets tool to find targets that consumed the most time in the second build — these are your optimization targets

Fallback: text-log replay (when MCP is unavailable)

2. Replay the second binlog to a diagnostic text log:

   dotnet msbuild second.binlog -noconlog -fl -flp:v=diag;logfile=second-full.log;performancesummary
   

   Then search for targets that actually executed:

   grep 'Building target\|Target.*was not skipped' second-full.log
   

   In a perfectly incremental build, most targets should be skipped.

3. Inspect non-skipped targets by looking for their execution messages in the diagnostic log. Check for "out of date" messages that indicate why a target ran.

4. Look for key messages in the binlog:

   • "Building target 'X' completely" — means MSBuild found no outputs or all outputs are missing; this is a full target execution.
   • "Building target 'X' incrementally" — means some (but not all) outputs are out of date.
   • "Skipping target 'X' because all output files are up-to-date" — target was correctly skipped.

5. Search for "is newer than output" messages to find the specific input file that triggered the rebuild:

   grep "is newer than output" second-full.log
   

   This reveals exactly which input file's timestamp caused MSBuild to consider the target out of date.

Additional diagnostic techniques

• Compare first.binlog and second.binlog side by side in the MSBuild Structured Log Viewer to see what changed.
• Use grep 'Target Performance Summary' -A 30 second-full.log to see which targets consumed the most time in the second build — these are your optimization targets.
• Check for targets with zero-duration that still ran — they may have unnecessary dependencies causing them to execute.

FileWrites and Clean Build

The FileWrites item group is MSBuild's mechanism for tracking files generated during the build. It powers dotnet clean and helps maintain correct incremental behavior.

• FileWrites item: Register any file your custom targets create so that dotnet clean knows to remove them. Without this, generated files accumulate across builds and may confuse incremental checks.
• FileWritesShareable item: Use this for files that are shared across multiple projects (e.g., shared generated code). These files are tracked but not deleted if other projects still reference them.
• If not registered: Files accumulate in the output and intermediate directories. dotnet clean won't remove them, and they may cause stale data issues or confuse up-to-date checks.

Pattern for registering generated files

Add generated files to FileWrites inside the target that creates them:

<Target Name="MyGenerator" Inputs="..." Outputs="$(IntermediateOutputPath)generated.cs">
  <!-- Generate the file -->
  <WriteLinesToFile File="$(IntermediateOutputPath)generated.cs" Lines="@(GeneratedLines)" />

  <!-- Register for clean -->
  <ItemGroup>
    <FileWrites Include="$(IntermediateOutputPath)generated.cs" />
  </ItemGroup>
</Target>

Visual Studio Fast Up-to-Date Check

Visual Studio has its own up-to-date check (Fast Up-to-Date Check, or FUTDC) that is separate from MSBuild's Inputs/Outputs mechanism. Understanding the difference is critical for diagnosing "it rebuilds in VS but not on the command line" issues.

• VS FUTDC is faster because it runs in-process and checks a known set of items without invoking MSBuild at all. It compares timestamps of well-known item types (Compile, Content, EmbeddedResource, etc.) against the project's primary output.
• It can be wrong if your project uses custom build actions, custom targets that generate files, or non-standard item types that FUTDC doesn't know about.
• Disable FUTDC to force Visual Studio to use MSBuild's full incremental check:

  <PropertyGroup>
    <DisableFastUpToDateCheck>true</DisableFastUpToDateCheck>
  </PropertyGroup>
  

• Diagnose FUTDC decisions by viewing the Output window in VS: go to Tools → Options → Projects and Solutions → SDK-Style Projects and set Up-to-date Checks logging level to Verbose or above. FUTDC will log exactly which file it considers out of date.
• Common VS FUTDC issues:
  • Custom build actions not registered with the FUTDC system
  • CopyToOutputDirectory items that are newer than the last build
  • Items added dynamically by targets that FUTDC doesn't evaluate
  • Content or None items with CopyToOutputDirectory="PreserveNewest" that have been modified

Making Custom Targets Incremental

The following is a complete example of a well-structured incremental custom target:

<Target Name="GenerateConfig"
        Inputs="$(MSBuildProjectFile);@(ConfigInput)"
        Outputs="$(IntermediateOutputPath)config.generated.cs"
        BeforeTargets="CoreCompile">
  <!-- Generate file only if inputs changed -->
  <WriteLinesToFile File="$(IntermediateOutputPath)config.generated.cs" Lines="..." />
  <ItemGroup>
    <FileWrites Include="$(IntermediateOutputPath)config.generated.cs" />
    <Compile Include="$(IntermediateOutputPath)config.generated.cs" />
  </ItemGroup>
</Target>

Key points in this example:

• Inputs includes $(MSBuildProjectFile): This ensures the target reruns if the project file itself changes (e.g., a property that affects generation is modified).
• Inputs includes @(ConfigInput): The actual source files that drive generation.
• Outputs uses $(IntermediateOutputPath): Generated files go in the obj/ directory, which is managed by MSBuild and cleaned automatically.
• BeforeTargets="CoreCompile": The generated file is available before the compiler runs.
• FileWrites registration: Ensures dotnet clean removes the generated file.
• Compile inclusion: Adds the generated file to the compilation without requiring it to exist at evaluation time.

Common mistakes to avoid

<!-- BAD: No Inputs/Outputs — runs every build -->
<Target Name="BadTarget" BeforeTargets="CoreCompile">
  <Exec Command="generate-code.exe" />
</Target>

<!-- BAD: Volatile output path — never finds previous output -->
<Target Name="BadTarget2"
        Inputs="@(Compile)"
        Outputs="$(OutputPath)gen_$([System.DateTime]::Now.Ticks).cs">
  <Exec Command="generate-code.exe" />
</Target>

<!-- GOOD: Stable paths, registered outputs -->
<Target Name="GoodTarget"
        Inputs="@(Compile)"
        Outputs="$(IntermediateOutputPath)generated.cs"
        BeforeTargets="CoreCompile">
  <Exec Command="generate-code.exe -o $(IntermediateOutputPath)generated.cs" />
  <ItemGroup>
    <FileWrites Include="$(IntermediateOutputPath)generated.cs" />
    <Compile Include="$(IntermediateOutputPath)generated.cs" />
  </ItemGroup>
</Target>

Performance Summary and Preprocess

MSBuild provides built-in tools to understand what's running and why.

• /clp:PerformanceSummary — Appends a summary at the end of the build showing time spent in each target and task. Use this to quickly identify the most expensive operations:

  dotnet build /clp:PerformanceSummary
  

  This shows a table of targets sorted by cumulative time, making it easy to spot targets that shouldn't be running in an incremental build.

• /pp:preprocess.xml — Generates a single XML file with all imports inlined, showing the fully evaluated project. This is invaluable for understanding what targets, properties, and items are defined and where they come from:

  dotnet msbuild /pp:preprocess.xml
  

  Search the preprocessed output to find where Inputs and Outputs are defined for any target, or to understand the full chain of imports.

• Use both together to understand what's running (PerformanceSummary) and what's imported (/pp), then cross-reference with binlog analysis for a complete picture.

Common Fixes

• Always add Inputs and Outputs to custom targets — This is the single most impactful change for incremental build performance. Without both attributes, the target runs every time.
• Use $(IntermediateOutputPath) for generated files — Files in obj/ are tracked by MSBuild's clean infrastructure and won't leak between configurations.
• Register generated files in FileWrites — Ensures dotnet clean removes them and prevents stale file accumulation.
• Avoid volatile data in build — Don't embed timestamps, random values, or build counters in file paths or generated content unless you have a deliberate strategy for managing staleness. If you must use volatile data, isolate it to a single file with minimal downstream impact.
• Use Returns instead of Outputs when you need to pass items without creating incremental build dependency — Outputs serves double duty: it defines the incremental check AND the items returned from the target. If you only need to pass items to calling targets without affecting incrementality, use Returns instead:

  <!-- Outputs: affects incremental check AND return value -->
  <Target Name="GetFiles" Outputs="@(DiscoveredFiles)">...</Target>
  
  <!-- Returns: only affects return value, no incremental check -->
  <Target Name="GetFiles" Returns="@(DiscoveredFiles)">...</Target>