hardware-in-the-loop-test
Validate firmware behavior on real hardware rather than compilation-only checks. Use when running physical acceptance tests, confirming boot markers, validating sensor output, or checking runtime timing/telemetry.
Datos de origen
- Repositorio
- jl-codes/platformio-mcp
- Última actividad en el origen
- 17 de mayo de 2026 a las 06:06
- Idioma detectado de SKILL.md
- inglés
- Estrellas
- 49
- Forks
- 19
Opciones de instalación
De forma predeterminada está seleccionado el prompt que primero revisa el origen. Puedes cambiar a un comando directo o descargar una copia local.
Revisa los archivos de origen
Lee SKILL.md y los archivos complementarios que muestra SkillsMP antes de decidir si quieres instalarlo.
Mostrando SKILL.md
SKILL.md
Instrucciones de origen · Vista previa de solo lectura- name
- hardware-in-the-loop-test
- description
- Validate firmware behavior on real hardware rather than compilation-only checks. Use when running physical acceptance tests, confirming boot markers, validating sensor output, or checking runtime timing/telemetry.
# Hardware-in-the-Loop Test
## Purpose
Use this skill to validate firmware behavior on a real device, not just through compilation.
## Safety Rules
- Ask before flashing.
- Do not assume physical wiring is safe.
- Do not activate motors, heaters, lasers, relays, pumps, or high-power outputs without explicit user approval.
- Keep tests bounded by timeout.
- Save logs and artifacts.
## Workflow
1. Define expected behavior.
2. Build firmware.
3. Ask before flashing.
4. Flash firmware.
5. Monitor device output.
6. Check expected serial strings, timing, or telemetry.
7. Mark pass/fail.
8. Save build logs, flash logs, and serial logs.
9. Summarize results.
## Example Test Definition
```yaml
name: esp32_boot_marker
board: esp32dev
expected:
serial_contains: BOOT_OK
timeout_seconds: 15
```
Ver en GitHub